SIST EN ISO 10556:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vlaknene vrvi iz poliestrskih/poliolefinskih dvojnih vlaken (ISO 10556:2009)Faserseile aus Polyester/Polyolefin-Doppelfaserseile (ISO 10556:2009)Cordages en fibres bi-matériaux polyester/polyoléfines (ISO 10556:2009)Fibre ropes of polyester/polyolefin dual fibres (ISO 10556:2009)59.080.50VrviRopesICS:Ta slovenski standard je istoveten z:EN ISO 10556:2009SIST EN ISO 10556:2010en,fr,de01-marec-2010SIST EN ISO 10556:2010SLOVENSKI
STANDARDSIST EN 14686:20051DGRPHãþD



SIST EN ISO 10556:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10556
December 2009 ICS 59.080.50 Supersedes EN 14686:2004English Version
Fibre ropes of polyester/polyolefin dual fibres (ISO 10556:2009) Cordages en fibres bi-matériaux polyester/polyoléfines (ISO 10556:2009)
Faserseile aus Polyester/Polyolefin-Doppelfaserseile (ISO 10556:2009) This European Standard was approved by CEN on 4 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10556:2009: ESIST EN ISO 10556:2010



EN ISO 10556:2009 (E) 2 Contents Page Foreword .3 SIST EN ISO 10556:2010



EN ISO 10556:2009 (E) 3 Foreword This document (EN ISO 10556:2009) has been prepared by Technical Committee ISO/TC 38 "Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14686:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10556:2009 has been approved by CEN as a EN ISO 10556:2009 without any modification.
SIST EN ISO 10556:2010



SIST EN ISO 10556:2010



Reference numberISO 10556:2009(E)© ISO 2009
INTERNATIONAL STANDARD ISO10556First edition2009-12-01Fibre ropes of polyester/polyolefin dual fibres Cordages en fibres bi-matériaux polyester/polyoléfines
SIST EN ISO 10556:2010



ISO 10556:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2009 – All rights reserved
SIST EN ISO 10556:2010



ISO 10556:2009(E) © ISO 2009 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10556 was prepared by Technical Committee ISO/TC 38, Textiles.
SIST EN ISO 10556:2010



SIST EN ISO 10556:2010



INTERNATIONAL STANDARD ISO 10556:2009(E) © ISO 2009 – All rights reserved 1 Fibre ropes of polyester/polyolefin dual fibres 1 Scope This International Standard specifies requirements for 3-strand hawser-laid, 8-strand and 12-strand braided fibre ropes made of polyester in combination with polyolefin, and gives rules for their designation. 2 Normative references The following referenced documents are indispensable fo
...