Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber

This European Standard specifies permitted deviations for thickness and width at reference moisture content and adjustments for changes in size due to changes in moisture content. Preferred sizes for thicknesses of 38 mm and over are also specified. This standard applies to softwood sawn timber. An informative annex gives complementary national sizes.

Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmasse - Teil 1: Nadelschnittholz

Diese Europäische Norm legt zulässige Abweichungen für Dicken und Breiten bei einem Bezugsfeuchtegehalt und Anpassungen für Maßänderungen aufgrund von Änderungen im Feuchtegehalt fest. Vorzugsmaße für Dicken ab 38 mm sind ebenfalls aufgeführt.
Diese Norm gilt für Nadelschnittholz.
Ein informativer Anhang gibt zusätzliche nationale Maße an.
ANMERKUNG   A.5 enthält für Frankreich das Vorzugsmaß-Konzept für frisches Holz.

Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1: Bois sciés résineux

La présente norme prescrit les écarts admissibles par rapport aux épaisseurs et aux largeurs à une humidité de référence ainsi que les adaptations aux variations dimensionnelles dues à des variations d’humidité. Les dimensions préférentielles sont précisées pour une épaisseur également ou supérieure à 38 mm.
La présente norme s’applique aux bois sciés résineux.
Une annexe informative fournit des dimensions nationales complémentaires.
NOTE   Le concept de dimension préférentielle pour du bois vert  est introduit en A.5 pour la France.

Okrogli in žagani les - Dovoljena odstopanja in prednostne mere - 1. del: Žagani les iglavcev

Ta evropski standard določa dovoljena odstopanja za debelino in širino pri referenčni vsebnosti vlage in prilagoditve za spremembe v velikosti zaradi sprememb v vsebnosti vlage. Določene so tudi prednostne velikosti za debelino 38 mm in več. Ta standard se uporablja za žagani les iglavcev. Informativni dodatek podaja komplementarne nacionalne velikosti.

General Information

Status
Published
Public Enquiry End Date
30-Dec-2008
Publication Date
10-Mar-2010
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
02-Feb-2010
Due Date
09-Apr-2010
Completion Date
11-Mar-2010

Relations

Buy Standard

Standard
EN 1313-1:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1313-1:2008
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Okrogli in žagani les - Dovoljena odstopanja in prednostne mere - 1. del: Žagani les iglavcevRund- und Schnittholz - Zulässige Abweichungen und Vorzugsmasse - Teil 1: NadelschnittholzBois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1: Bois sciés résineuxRound and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 1313-1:2010SIST EN 1313-1:2010en,fr,de01-april-2010SIST EN 1313-1:2010SLOVENSKI
STANDARDSIST EN 1313-1:2003/A1:2003SIST EN 1313-1:20031DGRPHãþD



SIST EN 1313-1:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1313-1
January 2010 ICS 79.040 Supersedes EN 1313-1:1997English Version
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1 : Bois sciés résineux
Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmaße - Teil 1: Nadelschnittholz This European Standard was approved by CEN on 18 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1313-1:2010: ESIST EN 1313-1:2010



EN 1313-1:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Reference moisture content .45 Change in size due to changes in moisture content .46 Permitted deviations .47 Common traditional target cross-sectional sizes .5Annex A (informative)
Complementary national sizes .6A.1 Complementary preferred sizes in Austria (AT) .6A.2 Complementary preferred sizes in Switzerland (CH) .6A.3 Complementary preferred sizes in Germany (DE) .7A.4 Complementary preferred sizes in Finland (FI) .7A.5 Complementary preferred sizes in France (Fr) .8A.6 Complementary preferred sizes in United Kingdom (GB) .9A.7 Complementary preferred sizes in Ireland (IR) .9A.8 Complementary preferred sizes in Italy (IT) . 10A.9 Complementary preferred sizes in the Netherlands (NL) . 10A.10 Complementary preferred sizes in Norway (NO) . 11A.11 Complementary preferred sizes in Sweden (SE) . 11A.12 Complementary preferred sizes in Poland (PL) . 12 SIST EN 1313-1:2010



EN 1313-1:2010 (E) 3 Foreword This document (EN 1313-1:2010) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1313-1:1997. This standard is one of a series concerning sawn timber. Compared to EN 1313-1:1997, the following modifications have been made: a) Amendment A1:1999 has been incorporated; b) A new Table 2 giving target cross-sectional sized based on metric measure has been added and tables given in Annex A have been modified accordingly; c) In Annex A: Table A.5 "Complementary preferred sizes in France" has been completed and the concept of preferred size for green timber introduced (the fibre saturation point is assumed to be 28 %), Table A.10 "Complementary preferred sizes in Norway" has been completed and Table A.12 "Complementary preferred sizes in Poland" has been added. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po
...

SLOVENSKI STANDARD
oSIST prEN 1313-1:2008
01-november-2008
Okrogli in žagani les - Dovoljena odstopanja in prednostne mere - 1. del: Žagani
les iglavcev
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood
sawn timber
Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmasse - Teil 1:
Nadelschnittholz
Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1:
Bois sciés résineux
Ta slovenski standard je istoveten z: prEN 1313-1
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
oSIST prEN 1313-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1313-1:2008

---------------------- Page: 2 ----------------------
oSIST prEN 1313-1:2008
EUROPEAN STANDARD
DRAFT
prEN 1313-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2008
ICS 79.040 Will supersede EN 1313-1:1997
English Version
Round and sawn timber - Permitted deviations and preferred
sizes - Part 1: Softwood sawn timber
Bois ronds et bois sciés - Ecarts admissibles et dimensions Rund- und Schnittholz - Zulässige Abweichungen und
préférentielles - Partie 1: Bois sciés résineux Vorzugsmaße - Teil 1: Nadelschnittholz
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 175.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1313-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1313-1:2008
prEN 1313-1:2008 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Reference moisture content.4
5 Change in size due to changes in moisture content.4
6 Permitted deviations.5
7 Preferred target cross-sectional sizes .5
Annex A (informative) Complementary national sizes .6
A.1 Complementary preferred sizes in Austria (AT).6
A.2 Complementary preferred sizes in Switzerland (CH).7
A.3 Complementary preferred sizes in Germany (DE).7
A.4 Complementary preferred sizes in Finland (Fl) .8
A.5 Complementary preferred sizes in France (Fr).8
A.6 Complementary preferred sizes in United Kingdom (GB).9
A.7 Complementary preferred sizes in Ireland (IR).9
A.8 Complementary preferred sizes in Italy (IT).10
A.9 Complementary preferred sizes in the Netherlands (NL) .10
A.10 Complementary preferred sizes in Norway (NO).11
A.11 Complementary preferred sizes in Sweden (SE).11

2

---------------------- Page: 4 ----------------------
oSIST prEN 1313-1:2008
prEN 1313-1:2008 (E)
Foreword
This document (prEN 1313-1:2008) has been prepared by Technical Committee CEN/TC 175 “Round and
swan timber”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 1313-1:1997 and EN 1313-1:1997/A1:1999.
This standard is one of a series concerning sawn timber.
Compared to EN 1313-1:1977, the following modifications have been made:
a) Amendment A1: 1999 has been introduced,
b) Table A.10 "Complementary preferred sizes in Norway", given in Annex A has been completed.

3

---------------------- Page: 5 ----------------------
oSIST prEN 1313-1:2008
prEN 1313-1:2008 (E)
1 Scope
This standard specifies permitted deviations for thickness and widths at a reference moisture content and
adjustments for changes in size du
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.