iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 10882-2:2002

(Main)

Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)

Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)

This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove metals: - Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/; - Self-shielded tubular-cored arc welding; - Metal inert gas welding; MIG welding; gas metal arc welding /USA/; - Metal active gas welding; MAG welding; gas metal arc welding /USA/; etc.

Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren - Probenahme von partikelförmigen Stoffen und Gasen im Atembereich des Schweißers - Teil 2: Probenahme von Gasen (ISO 10882-2:2000)

Dieser Teil der EN ISO 10882 enthält eine Anleitung für die Ermittlung personenbezogener Exposition gegenüber Gasen und Dämpfen beim Schweißen und bei verwandten Verfahren. Er gilt für folgende thermische Verfahren zum Verbinden, Schneiden, Oberflächenbeschichten oder Abtragen von Metallen: - Lichtbogenhandschweißen; - Metall-Lichtbogenschweißen mit Fülldrahtelektrode ohne Schutzgas; - Metall-Inertgasschweißen (MIG); - Metall-Aktivgasschweißen (MAG); - Metall-Aktivgasschweißen mit Fülldrahtelektrode; etc.

Hygiene et sécurité en soudage et techniques connexes -Echantillonnage de particules en suspension et gaz dans la zone respiratoire des opérateurs - Partie 2: Echantillonnage des gaz (ISO 10882-2:2000)

La présente partie de l'EN ISO 10882 donne des indications pour la détermination de l'exposition individuelle aux gaz et aux vapeurs organiques en soudage et techniques connexes. Elle s'applique aux procédés thermiques suivant utilisés pour assembler, couper, plaquer ou éliminer le métal: - Soudage manuel a l'arc avec électrode enrobée; - Soudage a l'arc avec fil bourré autoprotecteur; - Soudage MIG (Soudage a l'arc sous protection de gaz inerte avec fil-électrode fusible); - Soudage MAG (Soudage a l'arc sous protection de gaz actif avec fil-électrode fusible); etc.

Varnost in zdravje pri varjenju in sorodnih postopkih - Vzorčenje prahu in plinov iz dihalnega območja varilca - 2.del: Vzorčenje plinov (ISO 10882-2:2000)

General Information

Status
Published
Publication Date
30-Apr-2002
ICS
13.040.30 - Workplace atmospheres
25.160.01 - Welding, brazing and soldering in general
Technical Committee
VAR - Welding
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2002
Due Date
01-May-2002
Completion Date
01-May-2002
Ref Project
EN ISO 10882-2:2000 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)

Relations

Child
SIST EN ISO 10882-1:2001 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001)
Effective Date
22-Dec-2008
Revised
oSIST prEN ISO 10882-2:2023 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023)
Effective Date
01-Jul-2023

Buy Standard

EN ISO 10882-2:2002EN ISO 10882-2:2002
PreviousNext
Standard
EN ISO 10882-2:2002
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10882-2:2002
01-maj-2002
9DUQRVWLQ]GUDYMHSULYDUMHQMXLQVRURGQLKSRVWRSNLK9]RUþHQMHSUDKXLQSOLQRYL]
GLKDOQHJDREPRþMDYDULOFDGHO9]RUþHQMHSOLQRY ,62
Health and safety in welding and allied processes - Sampling of airborne particles and
gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren -
Probenahme von partikelförmigen Stoffen und Gasen im Atembereich des Schweißers -
Teil 2: Probenahme von Gasen (ISO 10882-2:2000)
Hygiene et sécurité en soudage et techniques connexes -Echantillonnage de particules
en suspension et gaz dans la zone respiratoire des opérateurs - Partie 2:
Echantillonnage des

gaz (ISO 10882-2:2000)
Ta slovenski standard je istoveten z: EN ISO 10882-2:2000
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
SIST EN ISO 10882-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10882-2:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 10882-2:2002

---------------------- Page: 3 ----------------------

SIST EN ISO 10882-2:2002

---------------------- Page: 4 ----------------------

SIST EN ISO 10882-2:2002

---------------------- Page: 5 ----------------------

SIST EN ISO 10882-2:2002

---------------------- Page: 6 ----------------------

SIST EN ISO 10882-2:2002

---------------------- Page: 7 ----------------------

SIST EN ISO 10882-2:2002

------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10882-1:2011(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
EN ISO 10882-1:2011

This part of EN ISO 10882 specifies a procedure for personal sampling of airborne particles in welding and allied processes. The procedure describes determination of personal exposure to welding fume and other airborne particles generated by welding related operations. The general background level of airborne particles in the workplace atmosphere influences personal exposure, and therefore the role of fixed point sampling is also considered.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 10882-1:2023(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023)
prEN ISO 10882-1

ISO 10882-1:2011 specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant standards that specify required characteristics, performance requirements and test methods for workplace air measurement, and augments guidance provided in EN 689 on assessment strategy and measurement strategy. ISO 10882-1:2011 also specifies a procedure for making gravimetric measurements of personal exposure to airborne particles generated by welding and allied processes (welding fume) and other airborne particles generated by welding-related operations. Additionally, it provides references to suitable methods of chemical analysis, specified in other standards, to determine personal exposure to specific chemical agents present in welding fume and other airborne particles generated by welding-related operations.
The general background level of airborne particles in the workplace atmosphere influences personal exposure and therefore the role of fixed-point sampling is also considered.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 10882-2:2023(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023)
prEN ISO 10882-2

This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in
welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove
metals:
(111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/
(114) Self-shielded tubular-cored arc welding
(131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/
(135) Metal active gas welding; MAG welding; gas metal arc welding /USA/
(136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/
(137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/
(141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/
(15) Plasma arc welding;
(31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/
(52) Laser beam welding;
(912) Flame brazing; torch brazing /USA/
(97) Braze welding;
_ arc and flame gouging;
_ arc and laser cutting processes;
_ flame, plasma and laser and plasma cutting processes;
_ metal-spraying (see EN ISO 4063).
The following gases and vapours which can be produced or be present during welding and allied processes are
covered:
_ ozone (O3);
_ carbon monoxide (CO);
_ carbon dioxide (CO2);
_ nitric oxide (NO) and nitrogen dioxide (NO2);
_ vapours produced in the welding or cutting of metals having paint or other surface coatings.
Fuel, oxidant and shielding gases used in welding and allied processes are not covered.
The general background level of gases and vapours in the workplace atmosphere influences personal exposure,
and therefore the role of fixed point measurements is also considered.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10882-1:2011(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
EN ISO 10882-1:2011

This part of EN ISO 10882 specifies a procedure for personal sampling of airborne particles in welding and allied processes. The procedure describes determination of personal exposure to welding fume and other airborne particles generated by welding related operations. The general background level of airborne particles in the workplace atmosphere influences personal exposure, and therefore the role of fixed point sampling is also considered.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 10882-1:2023(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023)
prEN ISO 10882-1

ISO 10882-1:2011 specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant standards that specify required characteristics, performance requirements and test methods for workplace air measurement, and augments guidance provided in EN 689 on assessment strategy and measurement strategy. ISO 10882-1:2011 also specifies a procedure for making gravimetric measurements of personal exposure to airborne particles generated by welding and allied processes (welding fume) and other airborne particles generated by welding-related operations. Additionally, it provides references to suitable methods of chemical analysis, specified in other standards, to determine personal exposure to specific chemical agents present in welding fume and other airborne particles generated by welding-related operations.
The general background level of airborne particles in the workplace atmosphere influences personal exposure and therefore the role of fixed-point sampling is also considered.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 10882-2:2023(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023)
prEN ISO 10882-2

This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in
welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove
metals:
(111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/
(114) Self-shielded tubular-cored arc welding
(131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/
(135) Metal active gas welding; MAG welding; gas metal arc welding /USA/
(136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/
(137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/
(141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/
(15) Plasma arc welding;
(31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/
(52) Laser beam welding;
(912) Flame brazing; torch brazing /USA/
(97) Braze welding;
_ arc and flame gouging;
_ arc and laser cutting processes;
_ flame, plasma and laser and plasma cutting processes;
_ metal-spraying (see EN ISO 4063).
The following gases and vapours which can be produced or be present during welding and allied processes are
covered:
_ ozone (O3);
_ carbon monoxide (CO);
_ carbon dioxide (CO2);
_ nitric oxide (NO) and nitrogen dioxide (NO2);
_ vapours produced in the welding or cutting of metals having paint or other surface coatings.
Fuel, oxidant and shielding gases used in welding and allied processes are not covered.
The general background level of gases and vapours in the workplace atmosphere influences personal exposure,
and therefore the role of fixed point measurements is also considered.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE   This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61340-2-3:2016/AC:2023(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)
EN 61340-2-3:2016/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14002-2:2023(Main)
Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
EN ISO 14002-2:2023

This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day