Geographic information - Feature concept dictionaries and registers

ISO 19126:2009 specifies a schema for feature concept dictionaries to be established and managed as registers. It does not specify schemas for feature catalogues or for the management of feature catalogues as registers. However, because feature catalogue are often derived from feature concept dictionaries, ISO 19126:2009 does specify a schema for a hierarchical register of feature concept dictionaries and feature catalogues. These registers are in accordance with ISO 19135.

Information géographique - Dictionnaires de concepts de caracractéristiques et registres

L'ISO 19126:2009 sp�cifie un sch�ma pour les dictionnaires de concepts de caract�ristiques � �tablir et � g�rer comme des registres. Elle ne sp�cifie pas de sch�mas pour les catalogues de caract�ristiques ou pour leur gestion comme des registres. Toutefois, compte tenu que les catalogues de caract�ristiques sont souvent d�riv�s des dictionnaires de concepts de caract�ristiques, l'ISO 19126:2009 ne sp�cifie pas un sch�ma pour un registre hi�rarchique de dictionnaires de concepts de caract�ristiques et de catalogues de caract�ristiques. Ces registres sont conformes � l'ISO 19135.

Geografske informacije - Slovarji in registri konceptov o pojavih

General Information

Status
Not Published
Public Enquiry End Date
31-May-2009
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
16-Sep-2010
Due Date
21-Sep-2010
Completion Date
16-Sep-2010

Buy Standard

Standard
ISO 19126:2009 - Geographic information -- Feature concept dictionaries and registers
English language
40 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 19126:2009 - Information géographique -- Dictionnaires de concepts de caractéristiques et registres
French language
42 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/DIS 19126:2009
English language
48 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 19126
First edition
2009-11-01


Geographic information — Feature
concept dictionaries and registers
Information géographique — Dictionnaires de concepts de
caractéristiques et registres





Reference number
ISO 19126:2009(E)
©
ISO 2009

---------------------- Page: 1 ----------------------
ISO 19126:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19126:2009(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Conformance .1
2.1 Introduction.1
2.2 Conformance for a feature concept dictionary .1
2.3 Conformance for a register of feature concept dictionaries and/or feature catalogues .1
3 Normative references.2
4 Terms, definitions and abbreviations.2
4.1 Terms and definitions .2
4.2 Abbreviations.5
5 Concepts .5
5.1 Introduction.5
5.2 Feature concept dictionary.6
5.3 Registers .6
5.4 Feature concept dictionary register .8
5.5 Register of feature concept dictionary and feature catalogue registers.8
5.6 Relationship to data product specifications and application schemas .8
5.7 Community implementations .8
5.8 Notation .9
5.9 Packages .10
6 Feature concept dictionary schema .10
6.1 Introduction.10
6.2 CD_FeatureConceptDictionary .11
6.3 CD_Scope.12
6.4 CD_Concept .13
6.5 CD_ConceptRelationship .15
6.6 CD_ConceptRelationshipType.15
6.7 CD_FeatureConcept .15
6.8 CD_FeaturePropertyConcept .16
6.9 CD_FeatureAttributeConcept.16
6.10 CD_NominalValueConcept .17
6.11 CD_FeatureAssociationConcept .18
6.12 CD_FeatureRoleConcept .19
6.13 CD_FeatureOperationConcept.19
7 Management of feature concept dictionaries as registers.20
7.1 Introduction.20
7.2 Item class for feature concepts .20
7.3 Item class for feature attribute concepts.20
7.4 Item class for nominal value concepts .21
7.5 Item class for feature association concepts.21
7.6 Item class for feature operation concepts.21
8 Register of feature concept dictionaries and feature catalogues .22
8.1 Introduction.22
8.2 HR_FeatureInformationSubregisterDescription .22
8.3 Item classes for feature information subregisters.24
Annex A (informative) Feature concepts in dictionaries, catalogues and application schemas .25
© ISO 2009 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 19126:2009(E)
Annex B (normative) Abstract test suite.27
Annex C (normative) Information to be included in registration proposals .28
Annex D (informative) Example implementation of the feature concept dictionary schema as a
register.33
Annex E (informative) UML notation .35
Bibliography .40

iv © ISO 2009 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 19126:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19126 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
© ISO 2009 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO 19126:2009(E)
Introduction
This International Standard specifies a schema for geographic feature concept dictionaries managed as
registers. As described in ISO 19101, geographic features are abstractions of real world phenomena
associated with a location relative to the surface of the earth, about which data are collected, maintained and
disseminated.
A feature concept dictionary provides basic definitions and related information about a set of concepts that
may be used to describe geographic features and shared across multiple application areas. Elements from a
feature concept dictionary may be reused in one or more feature catalogues. A feature catalogue is often
associated with a particular application schema, product specification and data set. It provides a complete
textual specification of a set of feature types and their properties and relationships. See Annex A for further
discussion of the relationships between feature concept dictionaries, feature catalogues, application schemas
and product specifications.
ISO 19135 specifies procedures for the registration of items of geographic information. Items of geographic
information that may be registered are members of object classes specified in technical standards such as
those developed by ISO/TC 211. This International Standard defines object classes and specifies rules used
to establish and maintain feature concept dictionaries as ISO 19135 conformant register schemas.
ISO 19135 specifies the structure of a hierarchical register in which the principal register holds a set of items
that describe the subregisters. This International Standard specifies a schema for a hierarchical register where
the subregisters are feature concept dictionaries and/or feature catalogues. This International Standard
specifies an accompanying schema. The resulting hierarchical register may be used as a basis for
harmonization and the establishment of interoperability between different geographic information communities.
Feature concept dictionaries and feature catalogues maintained as registers may serve as sources of
reference for similar registers established by other geographic information communities as part of a system of
cross-referencing. Cross-referencing between respective items in registers of items of geographic information
may be difficult in cases where the structure of registers differs between information communities. This
International Standard may serve as a guide for different information communities to develop compatible
registers that can support a system of geographic information cross-referencing.
The Digital Geographic Information Working Group (DGIWG) community feature concept dictionary and
register is described as an example implementation of this International Standard.

vi © ISO 2009 – All rights reserved

---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARD ISO 19126:2009(E)

Geographic information — Feature concept dictionaries and
registers
1 Scope
This International Standard specifies a schema for feature concept dictionaries to be established and
managed as registers. It does not specify schemas for feature catalogues or for the management of feature
catalogues as registers. However, because feature catalogue are often derived from feature concept
dictionaries, this International Standard does specify a schema for a hierarchical register of feature concept
dictionaries and feature catalogues. These registers are in accordance with ISO 19135.
2 Conformance
2.1 Introduction
To conform to this International Standard, all of the conditions specified for at least one of the two
conformance classes described below shall be satisfied.
2.2 Conformance for a feature concept dictionary
Any feature concept dictionary that claims conformance to this International Standard shall satisfy all of the
conditions specified in the following abstract test suites:
a) ISO 19135, A.1, for general conformance to ISO 19135, and
b) B.2 of this International Standard.
A feature concept dictionary register established by ISO/TC 211 shall in addition satisfy all of the conditions
specified in the ISO 19135 abstract test suite for registers established by ISO/TC 211 (ISO 19135, A.3).
2.3 Conformance for a register of feature concept dictionaries and/or feature catalogues
Any register of feature concept dictionaries and/or feature catalogues that claims conformance to this
International Standard shall satisfy all of the conditions specified in the following abstract test suites:
a) ISO 19135, A.1, for general conformance to ISO 19135,
b) ISO 19135, A.2 for conformance to ISO 19135 as a hierarchical register, and
c) B.3 of this International Standard.
A register of feature concept dictionaries and/or feature catalogues established by ISO/TC 211 shall in
addition satisfy all of the conditions specified in the ISO 19135 abstract test suite for registers established by
ISO/TC 211 (ISO 19135, A.3).
© ISO 2009 – All rights reserved 1

---------------------- Page: 7 ----------------------
ISO 19126:2009(E)
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/TS 19103:2005, Geographic information — Conceptual schema language
ISO 19110:2005, Geographic information — Methodology for feature cataloguing
ISO 19115:2003, Geographic information — Metadata
ISO 19135:2005, Geographic information — Procedures for item registration
4 Terms, definitions and abbreviations
4.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
4.1.1
compound registry
registry containing multiple registers that share the same item classes and coordinated management of a
common characteristic
NOTE The common characteristic may be a shared namespace for the assignment of names and/or codes.
4.1.2
data product
dataset or dataset series that conforms to a data product specification
[ISO 19131:2007, definition 4.6]
4.1.3
data product specification
detailed description of a dataset or dataset series together with additional information that will enable it to be
created, supplied to and used by another party
[ISO 19131:2007, definition 4.7]
4.1.4
data type
specification of a value domain with operations allowed on values in this domain
[ISO/TS 19103:2005, definition 4.1.5]
4.1.5
feature
abstraction of real world phenomena
[ISO 19101:2002, definition 4.11]
EXAMPLE The phenomenon named “Eiffel Tower” may be classified with other similar phenomena into a feature
type named “tower”.
NOTE 1 A feature may occur as a type or an instance. In this International Standard, feature type is meant unless
otherwise specified.
NOTE 2 This International Standard does not address real world phenomena directly; it addresses only their
abstractions (feature concepts and feature types) and feature instances (data collected to represent a feature in
conformance with a specified feature type).
2 © ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------
ISO 19126:2009(E)
4.1.6
feature association
relationship that links instances of one feature type with instances of the same or a different feature type
[ISO 19110:2005, definition 4.2]
NOTE A feature association may occur as a type or an instance. In this International Standard, feature association
type is meant unless otherwise specified.
4.1.7
feature association concept
concept that may be specified in detail as one or more feature association types
EXAMPLE A “supports” feature association concept describes a relationship between real world phenomena such
as “highways” and “bridges” where the role of one feature is that it is supported-by the other feature (whose role is
supporter-of).
4.1.8
feature attribute
characteristic of a feature
[ISO 19101:2002, definition 4.12]
EXAMPLE 1 A feature attribute named “colour” may have an attribute value “green” which belongs to the data type
“text”.
EXAMPLE 2 A feature attribute named “length” may have an attribute value “82,4” which belongs to the data type
“real”.
NOTE 1 A feature attribute may occur as a type or an instance. In this International Standard, feature attribute type is
meant unless otherwise specified.
NOTE 2 A feature attribute has a name, a data type and a value domain associated to it. A feature attribute for a
feature instance also has an attribute value taken from the value domain.
4.1.9
feature attribute concept
concept that may be specified in detail as one or more feature attribute types
EXAMPLE A “height” feature attribute concept describes length in the vertical direction as a characteristic that may
be shared by real world phenomena such as “human”, “tree” and “building.”
4.1.10
feature catalogue
catalogue containing definitions and descriptions of the feature types, feature attributes and feature
relationships occurring in one or more sets of geographic data, together with any feature operations that may
be applied
[ISO 19101:2002, definition 4.13]
4.1.11
feature concept
concept that may be specified in detail as one or more feature types
EXAMPLE The feature concept “road” may be used to specify several different feature types, each with a different set
of properties appropriate for a particular application. For a travel planning application, it might have a limited set of attributes
such as name, route number, location and number of lanes, while for a maintenance application it might have an extensive
set of attributes detailing the structure and composition of each of the layers of material for which it is composed.
4.1.12
feature concept dictionary
dictionary that contains definitions of, and related descriptive information about, concepts that may be
specified in detail in a feature catalogue
© ISO 2009 – All rights reserved 3

---------------------- Page: 9 ----------------------
ISO 19126:2009(E)
4.1.13
feature operation
operation that every instance of a feature type may perform
[ISO 19110:2005, definition 4.5]
EXAMPLE A feature operation upon a “dam” is to raise the dam. The results of this operation are to raise the height
of the “dam” and the level of water in a “reservoir”.
NOTE The values of feature attributes of feature instances are affected by feature operations.
4.1.14
feature operation concept
concept that may be specified in detail as one or more feature operation types
EXAMPLE A “traffic flow” operation might return the number of persons or vehicles expected to move on or through
some kind of transportation feature during a period of time specified as input to the operation.
4.1.15
hierarchical register
structured set of registers for a domain of register items, composed of a principal register and a set of
subregisters
[ISO 19135:2005, definition 4.1.4]
EXAMPLE ISO 6523 is associated with a hierarchical register. The principal register contains organization identifier
schemes and each subregister contains a set of organization identifiers that comply with a single organization identifier
scheme.
4.1.16
identifier
linguistically independent sequence of characters capable of uniquely and permanently identifying that with
which it is associated
[ISO 19135:2005, definition 4.1.5]
4.1.17
item class
set of items with common properties
[ISO 19135:2005, definition 4.1.6]
NOTE 1 Class is used in this context to refer to a set of instances, not the concept abstracted from that set of instances.
NOTE 2 To avoid potential ambiguity in this International Standard, the expression “register item class” is used.
4.1.18
nominal value
name of an object, type, or category
NOTE Many feature attributes take nominal rather than numerical values. The value domain of such an attribute is
usually specified as an enumeration or a code list.
EXAMPLE “Deciduous needle leaf” is a nominal value that identifies a vegetation type.
4.1.19
register
set of files containing identifiers assigned to items with descriptions of the associated items
[ISO 19135:2005, definition 4.1.9]
4 © ISO 2009 – All rights reserved

---------------------- Page: 10 ----------------------
ISO 19126:2009(E)
4.1.20
registry
information system on which a register is maintained
[ISO 19135:2005, definition 4.1.13]
4.1.21
subregister
part of hierarchical register that contains items from a partition of a domain of information
[ISO 19135:2005, definition 4.1.17]
4.1.22
value domain
set of accepted values
[ISO/TS 19103:2005, definition 4.1.15]
4.2 Abbreviations
DGIWG Digital Geospatial Information Working Group
DFDD DGIWG Feature Data Dictionary
IEC International Electrotechnical Commission
IHO International Hydrographic Organization
TC Technical Committee
UML Unified Modeling Language
5 Concepts
5.1 Introduction
A feature concept dictionary describes concepts that may be used to characterize real world phenomena.
Feature types and feature property types may then be specified using these concepts and documented in a
feature catalogue. This International Standard specifies a feature concept dictionary schema (5.2 and
Clause 6).
ISO 19135 specifies procedures to be followed in preparing and maintaining registers of items of geographic
information. Such registers may be used to support discovery of, access to, and use of the contents of feature
concept dictionaries and feature catalogues. This International Standard specifies a schema for feature
concept dictionaries as registers and information to be included in item registration proposals (Annex C).
A single authority may need to establish a suite of coordinated feature concept dictionary registers and feature
catalogue registers that share a common structure, coding scheme and/or community of interest. This
International Standard specifies a compound registry mechanism to support such requirements (5.3.3).
Feature concept dictionaries and feature catalogues maintained as registers may serve as sources of
reference for similar registers established by other geographic information communities as part of a system of
cross-referencing. Feature concept dictionary registers and feature catalogue registers from different
communities may be organized as partitions of a hierarchical register. Based on ISO 19135, this International
Standard specifies a schema for a hierarchical register of feature concept dictionaries and feature catalogues
(5.5 and Clause 8) and information to be included in item registration proposals (Annex C).
© ISO 2009 – All rights reserved 5

---------------------- Page: 11 ----------------------
ISO 19126:2009(E)
5.2 Feature concept dictionary
A feature concept dictionary establishes a set of concepts that may be used to describe real world
phenomena; these include feature concepts, feature attribute concepts, feature association concepts, feature
operation concepts and nominal value concepts that may be included in the value domain of a feature
attribute concept. Feature types may then be specified using these concepts and documented in a feature
catalogue.
The schema presented in Clause 6 of this International Standard provides a detailed specification of the
content of feature concept dictionaries.
5.3 Registers
5.3.1 Overview
Registers provide a basis for the flexible management of items of geographic information. Feature concept
dictionaries and feature catalogues managed as registers may be published electronically, enabling the
discovery and direct use of their contents. They may also be easily extended and used as a basis for
harmonization and the establishment of interoperability between different geographic information communities.
5.3.2 Register structure
ISO 19135 specifies several alternatives for structuring registers:
a) A simple register contains items of a single item class (ISO 19135:2005, 7.1.2).
b) A multi-part register contains items from different item classes (ISO 19135:2005, 7.1.3).
c) A hierarchical register is a structured set of registers composed of a principal register and one or more
subregisters (ISO 19135:2005, 7.1.4). The principal register holds a set of items that describe the
subregisters. Each of the subregisters holds a set of register items from a partition of the information
domain.
This International Standard specifies schemas for both multi-part registers (feature concept dictionaries) and
hierarchical registers (registers of feature concept dictionaries and/or feature catalogues).
5.3.3 Compound registry
An authority may need to establish a suite of coordinated registers that share a common structure but are
separated into individual registers within a compound registry.
EXAMPLE 1 A single community of interest may have geographic information requirements informed by several
scientific disciplines. Each discipline may be best handled by a separate set of domain experts and/or domain authorities.
For each, a separate control body, register manager and/or register owner may be desirable. While the individuals and
organizations responsible for the management of the registers may differ, the resulting collection of geographic information
is intended to be used “as a whole” even though its management is partitioned; this goal is facilitated by a common
register structure. Proposals for new information items may be sent to the registry “as a whole” and then directed to the
register manager responsible for the appropriate scientific discipline.
EXAMPLE 2 Several communities of interest may establish their own geographic information registers. They may
require the ability to interchange geographic information according to a common encoding method. It is desirable that a
single namespace for assignment of names (or codes) be established across the communities of interest. A common
policy is developed so that names (or codes) are assigned by register managers (or control bodies) for each register in a
coordinated manner. Possible policies include pre-allocation of portions of the namespace or dynamic assignment (and
deconfliction) as proposals are received and acted on. Shared register structure facilitates the establishment of common
data product and/or information content specifications among the disparate communities of interest.
6 © ISO 2009 – All rights reserved

---------------------- Page: 12 ----------------------
ISO 19126:2009(E)
This International Standard specifies a compound registry mechanism to support such requirem
...

NORME ISO
INTERNATIONALE 19126
Première édition
2009-11-01



Information géographique —
Dictionnaires de concepts de
caractéristiques et registres
Geographic information — Feature concept dictionaries and registers





Numéro de référence
ISO 19126:2009(F)
©
ISO 2009

---------------------- Page: 1 ----------------------
ISO 19126:2009(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2009
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2009 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 19126:2009(F)
Sommaire Page
Avant-propos .v
Introduction.vi
1 Domaine d'application .1
2 Conformité.1
2.1 Introduction.1
2.2 Conformité relative à un dictionnaire de concepts de caractéristiques.1
2.3 Conformité d'un registre de dictionnaires de concepts de caractéristiques et/ou de
catalogues de caractéristiques.1
3 Références normatives.2
4 Termes, définitions et abréviations .2
4.1 Termes et définitions .2
4.2 Abréviations.5
5 Concepts .6
5.1 Introduction.6
5.2 Dictionnaire de concepts de caractéristiques.6
5.3 Registres .6
5.4 Registre de dictionnaires de concepts de caractéristiques .8
5.5 Registre de dictionnaires de concepts de caractéristiques et registres de catalogues de
caractéristiques .9
5.6 Relation avec les spécifications de contenu informationnel et les schémas d'application.9
5.7 Mises en application dans la communauté .9
5.8 Notation .10
5.9 Paquetages .11
6 Schéma du dictionnaire de concepts de caractéristiques.11
6.1 Introduction.11
6.2 CD_FeatureConceptDictionary (Dictionnaire de concepts de caractéristiques).12
6.3 CD_Scope.13
6.4 CD_Concept .14
6.5 CD_ConceptRelationship (relation de concept).16
6.6 CD_ConceptRelationshipType (type de relation de concept).16
6.7 CD_FeatureConcept (concept de caractéristique).16
6.8 CD_FeaturePropertyConcept (concept de propriété de caractéristique).17
6.9 CD_FeatureAttributeConcept (concept d'attribut de caractéristique) .17
6.10 CD_NominalValueConcept (concept de valeur nominale).18
6.11 CD_FeatureAssociationConcept (concept d'association de caractéristiques) .19
6.12 CD_FeatureRoleConcept (concept de rôle de caractéristique).20
6.13 CD_FeatureOperationConcept (concept d'opération de caractéristique) .20
7 Gestion des dictionnaires de concepts de caractéristiques comme des registres .21
7.1 Introduction.21
7.2 Classe d'éléments pour des concepts de caractéristique .21
7.3 Classe d'éléments pour des concepts d'attribut de caractéristique.21
7.4 Classe d'éléments pour des concepts de valeur nominale .22
7.5 Classe d'éléments pour des concepts d'association de caractéristiques .22
7.6 Classe d'éléments pour des concepts d'opération de caractéristique.22
8 Registre des dictionnaires de concepts de caractéristiques et des catalogues de
caractéristiques .23
8.1 Introduction.23
© ISO 2009 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 19126:2009(F)
8.2 HR_FeatureInformationSubregisterDescription (description de sous-registre
d'information de caractéristique).23
8.3 Classes d'éléments relatives aux sous-registres d'information de caractéristique.25
Annexe A (informative) Concepts de caractéristique dans les dictionnaires, les catalogues et les
schémas d'application .27
Annexe B (normative) Suite d'essais sommaires.29
Annexe C (normative) Informations à inclure dans les propositions d'enregistrement.30
Annexe D (informative) Exemple de mise en application du schéma d'un dictionnaire de concepts
de caractéristiques en tant que registre .35
Annexe E (informative) Notation UML.37
Bibliographie .42

iv © ISO 2009 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 19126:2009(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 19126 a été élaborée par le comité technique ISO/TC 211, Information géographique/Géomatique.
© ISO 2009 – Tous droits réservés v

---------------------- Page: 5 ----------------------
ISO 19126:2009(F)
Introduction
La présente Norme internationale spécifie un schéma pour les dictionnaires de concepts de caractéristiques
géographiques gérés comme des registres. Comme décrit dans l'ISO 19101, les caractéristiques
géographiques sont des abstractions des phénomènes réels associés à un emplacement de la surface de la
terre, dont les données sont recueillies, conservées et diffusées.
Un dictionnaire de concepts de caractéristiques fournit les définitions de base et les informations associées
relatives à un ensemble de concepts susceptible d'être utilisé pour décrire les caractéristiques géographiques
et communes à diverses zones d'application. Les éléments issus d'un dictionnaire de concepts de
caractéristiques peuvent être réutilisés dans un ou plusieurs catalogues de caractéristiques. Un catalogue de
caractéristiques est souvent associé à un schéma d'application particulier, à une spécification de contenu et à
un ensemble de données. Il fournit une spécification textuelle complète d'un ensemble de types de
caractéristiques, ainsi que leurs propriétés et relations. Voir l'Annexe A pour une analyse plus approfondie
des relations entre les dictionnaires de concepts de caractéristiques, les catalogues de caractéristiques, les
schémas d'application et les spécifications de contenu.
L'ISO 19135 spécifie les procédures d'enregistrement des éléments d'information géographique. Les
éléments d'information géographique susceptibles d'être enregistrés sont des membres de classes d'objet
spécifiées dans les normes techniques telles que celles développées par l'ISO/TC 211. La présente Norme
internationale définit les classes d'objet et spécifie les règles utilisées pour établir et conserver les
dictionnaires de concepts de caractéristiques tels que les schémas de registre conformes à l'ISO 19135.
L'ISO 19135 spécifie la structure d'un registre hiérarchique dans lequel le registre principal contient un
ensemble d'éléments qui décrivent les sous-registres. La présente Norme internationale spécifie un schéma
relatif à un registre hiérarchique dans lequel les sous-registres sont des dictionnaires de concepts de
caractéristiques et/ou des catalogues de caractéristiques. La présente Norme internationale spécifie un
schéma d'accompagnement. Le registre hiérarchique qui en résulte peut être utilisé comme une base pour
l'harmonisation et l'établissement de l'interopérabilité entre différentes communautés d'information
géographique.
Les dictionnaires de concepts de caractéristiques et les catalogues de caractéristiques gérés comme des
registres peuvent servir de sources de référence pour des registres similaires établis par d'autres
communautés d'information géographique dans le cadre d'un système de vérification de concordance. La
vérification de concordance entre les éléments respectifs des registres d'éléments d'information géographique
peut se révéler difficile lorsque la structure des registres diffère d'une communauté d'information à l'autre. La
présente Norme internationale peut servir de guide à différentes communautés d'information dans le cadre de
l'élaboration de registres compatibles susceptibles de prendre en charge un système de vérification de
concordance d'information géographique.
Le dictionnaire et registre de concepts de caractéristiques de la communauté du «Digital Geographic
Information Working Group» (DGIWG) sont décrits comme un exemple de mise en application de la présente
Norme internationale.

vi © ISO 2009 – Tous droits réservés

---------------------- Page: 6 ----------------------
NORME INTERNATIONALE ISO 19126:2009(F)

Information géographique — Dictionnaires de concepts de
caractéristiques et registres
1 Domaine d'application
La présente Norme internationale spécifie un schéma pour les dictionnaires de concepts de caractéristiques à
établir et à gérer comme des registres. Elle ne spécifie pas de schémas pour les catalogues de
caractéristiques ou pour leur gestion comme des registres. Toutefois, compte tenu que les catalogues de
caractéristiques sont souvent dérivés des dictionnaires de concepts de caractéristiques, la présente Norme
internationale ne spécifie pas un schéma pour un registre hiérarchique de dictionnaires de concepts de
caractéristiques et de catalogues de caractéristiques. Ces registres sont conformes à l'ISO 19135.
2 Conformité
2.1 Introduction
Pour être conformes à la présente Norme internationale, toutes les conditions spécifiées pour au moins l'une
des deux classes de conformité décrites ci-dessous doivent être satisfaites.
2.2 Conformité relative à un dictionnaire de concepts de caractéristiques
Tout dictionnaire de concepts de caractéristiques qui revendique la conformité à la présente Norme
internationale doit remplir toutes les conditions spécifiées dans les suites d'essais sommaires suivantes:
a) ISO 19135, A.1, pour conformité générale à l'ISO 19135, et
b) B.2 de la présente Norme internationale.
Un registre de dictionnaire de concepts de caractéristiques établi par l'ISO/TC 211 doit en plus remplir toutes
les conditions spécifiées dans la suite d'essais sommaires de l'ISO 19135 pour les registres établis par
l'ISO/TC 211 [ISO 19135, A.3].
2.3 Conformité d'un registre de dictionnaires de concepts de caractéristiques et/ou de
catalogues de caractéristiques
Tout registre de dictionnaires de concepts de caractéristiques et/ou de catalogues de caractéristiques qui
revendique la conformité à la présente Norme internationale doit remplir toutes les conditions spécifiées dans
les suites d'essai sommaires suivantes:
a) ISO 19135, A.1, pour conformité générale à l'ISO 19135,
b) ISO 19135, A.2 pour conformité à l'ISO 19135 en tant que registre hiérarchique, et
c) B.3 de la présente Norme internationale.
Un registre de dictionnaires de concepts de caractéristiques et/ou de catalogues de caractéristiques établi par
l'ISO/TC 211 doit en plus remplir toutes les conditions spécifiées dans la suite d'essais sommaires de
l'ISO 19135 établie par l'ISO/TC 211 [ISO 19135, A.3].
© ISO 2009 – Tous droits réservés 1

---------------------- Page: 7 ----------------------
ISO 19126:2009(F)
3 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO/TS 19103:2005, Information géographique — Schéma de langage conceptuel
ISO 19110:2005, Information géographique — Méthodologie de catalogage des entités
ISO 19115:2003, Information géographique — Métadonnées
ISO 19135:2005, Information géographique — Procédures pour l'enregistrement d'éléments
4 Termes, définitions et abréviations
4.1 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s'appliquent.
4.1.1
enregistrement composé
registre contenant plusieurs registres ayant les mêmes classes d'élément et une gestion coordonnée d'une
caractéristique commune
NOTE La caractéristique commune peut être un espace de noms partagé pour l'attribution de noms et/ou de codes.
4.1.2
contenu informationnel
ensemble de données ou série d'ensembles de données conforme à une spécification de contenu
informationnel
[ISO 19131:2007, définition 4.6]
4.1.3
spécification de contenu informationnel
description détaillée d'un ensemble de données ou d'une série d'ensembles de données avec des
informations supplémentaires permettant à une autre partie de le créer, le fournir ou l'utiliser
[ISO 19131:2007, définition 4.7]
4.1.4
type de données
spécification d'un domaine de valeur avec des opérations admises pour les valeurs de ce domaine
[ISO/TS 19103:2005, définition 4.1.5]
4.1.5
caractéristique
abstraction d'un phénomène réel
[ISO 19101:2002, définition 4.11]
EXEMPLE Le phénomène désigné «Tour Eiffel» peut être classé avec d'autres phénomènes similaires dans un type
de caractéristique désigné «tour».
NOTE 1 Une caractéristique peut se présenter sous la forme d'un type ou d'une instance. Sauf spécification contraire,
la présente Norme internationale concerne le type de caractéristique.
NOTE 2 La présente Norme internationale ne concerne pas directement les phénomènes réels mais traite seulement
leurs abstractions (concepts de caractéristique et types de caractéristiques) et les instances de caractéristiques (données
recueillies pour représenter une caractéristique conforme à un type de caractéristique spécifié).
2 © ISO 2009 – Tous droits réservés

---------------------- Page: 8 ----------------------
ISO 19126:2009(F)
4.1.6
association de caractéristiques
relation entre les instances d'un type de caractéristique et les instances d'un type de caractéristique
identique ou différent
[ISO 19110:2005, définition 4.2]
NOTE Une association de caractéristiques peut se présenter sous la forme d'un type ou d'une instance. Sauf
spécification contraire, la présente Norme internationale concerne le type d'association de caractéristiques.
4.1.7
concept d'association de caractéristique
concept qui peut être spécifié en détail comme un ou plusieurs types d'association de caractéristiques
EXEMPLE Un concept d'association de caractéristiques de «prise en charge» décrit une relation entre les
phénomènes réels tels que les «autoroutes» et les «ponts» où le rôle d'une caractéristique est d'être prise en charge par
l'autre caractéristique (dont le rôle est de prendre en charge).
4.1.8
attribut de caractéristique
propriété d'une caractéristique
[ISO 19101:2002, définition 4.12]
EXEMPLE 1 Un attribut de caractéristique désigné «couleur» peut avoir une valeur d'attribut «vert» qui appartient au
type de données «texte».
EXEMPLE 2 Un attribut de caractéristique désigné «longueur» peut avoir une valeur d'attribut «82,4» qui appartient au
type de données «réel».
NOTE 1 Un attribut de caractéristique peut se présenter sous la forme d'un type ou d'une instance. Sauf spécification
contraire, la présente Norme internationale concerne le type d'attribut de caractéristique.
NOTE 2 Un attribut de caractéristique a un nom, un type de données et un domaine de valeur qui lui est associé. Un
attribut de caractéristique relatif à une instance de caractéristique a également une valeur d'attribut issue du domaine de
valeur.
4.1.9
concept d'attribut de caractéristique
concept qui peut être spécifié en détail par un ou plusieurs types d'attribut de caractéristique
EXEMPLE Un concept d'attribut de caractéristique «hauteur» décrit la longueur dans la direction verticale par une
caractéristique que peuvent avoir en commun des phénomènes réels tels que «être humain», «arbre» et «bâtiment».
4.1.10
catalogue de caractéristiques
catalogue contenant des définitions et des descriptions des types de caractéristique, des attributs de
caractéristique et des relations de caractéristiques intervenant dans un ou plusieurs ensembles de données
géographiques, avec toutes opérations de caractéristique susceptibles d'être appliquées
[ISO 19101:2002, définition 4.13]
4.1.11
concept de caractéristique
concept qui peut être spécifié en détail par un ou plusieurs types de caractéristique
EXEMPLE Le concept de caractéristique «route» peut être utilisé pour spécifier plusieurs types différents de
caractéristiques, chacun d'eux ayant un ensemble différent de propriétés correspondant à une application particulière.
Pour une application de planification de voyage, il peut exister un ensemble limité d'attributs tels que le nom, le numéro de
la route, l'emplacement et le nombre des voies, tandis que pour une application de maintenance, il peut exister
d'importants attributs de compensation qui détaillent la structure et la composition de chacune des couches constitutives
du matériau.
© ISO 2009 – Tous droits réservés 3

---------------------- Page: 9 ----------------------
ISO 19126:2009(F)
4.1.12
dictionnaire de concepts de caractéristiques
dictionnaire qui contient les définitions et les informations descriptives correspondantes relatives aux concepts
susceptibles d'être spécifiés en détail dans un catalogue de caractéristiques
4.1.13
opération de caractéristique
opération que chaque instance d'un type de caractéristique peut effectuer
[ISO 19110:2005, définition 4.5]
EXEMPLE Une opération de caractéristique sur un «barrage» est de surélever le barrage. Les résultats de cette
opération sont de relever la hauteur du «barrage» et le niveau de l'eau dans un «réservoir».
NOTE Les valeurs des attributs de caractéristique des instances de caractéristique sont affectées par les
opérations de caractéristique.
4.1.14
concept d'opération de caractéristique
concept qui peut être spécifié en détail par un ou plusieurs types d'opération de caractéristique
EXEMPLE Une opération de «flux de trafic» peut renvoyer au nombre prévu de personnes ou de véhicules en
déplacement ou circulant dans une caractéristique de transport donnée durant une période de temps spécifiée par
entrée de l'opération.
4.1.15
registre hiérarchique
ensemble structuré de registres pour un domaine d'éléments du registre, composé d'un registre principal et
d'un ensemble de sous-registres
[ISO 19135:2005, définition 4.1.4]
EXEMPLE L'ISO 6523 est associée à un registre hiérarchique. Le registre principal contient des programmes
d'identification de l'organisation et chaque sous-registre contient un ensemble d'identificateurs de l'organisation qui
répond au programme d'identification de l'organisation unique.
4.1.16
identificateur
séquence de caractères linguistiquement indépendante capable d'identifier de façon unique et permanente
les éléments auxquels elle est associée
[ISO 19135:2005, définition 4.1.5]
4.1.17
classe d'éléments
ensemble d'éléments possédant des propriétés communes
[ISO 19135:2005, définition 4.1.6]
NOTE 1 La classe, utilisée dans ce contexte, fait référence à un ensemble d'instances et non pas au concept issu de
cet ensemble d'instances.
NOTE 2 Pour éviter toute ambiguïté, la présente Norme internationale utilise l'expression «classe d'éléments de
registre».
4 © ISO 2009 – Tous droits réservés

---------------------- Page: 10 ----------------------
ISO 19126:2009(F)
4.1.18
valeur nominale
nom d'un objet, d'un type ou d'une catégorie
NOTE De nombreux attributs de caractéristique prennent des valeurs nominales plutôt que des valeurs
numériques. Le domaine de valeur d'un tel attribut est généralement spécifié sous forme d'une énumération ou d'une
liste de codes.
EXEMPLE Une «feuille aciculaire caduque» est une valeur nominale qui identifie un type de végétation.
4.1.19
registre
ensemble de fichiers contenant des identificateurs attribués à des éléments avec des descriptions des
éléments associés
[ISO 19135:2005, définition 4.1.9]
4.1.20
enregistrement
système d'information sur lequel un registre est maintenu
[ISO 19135:2005, définition 4.1.13]
4.1.21
sous-registre
partie d'un registre hiérarchique contenant des éléments provenant d'une division du domaine d'information
[ISO 19135:2005, définition 4.1.17]
4.1.22
domaine de valeur
ensemble de valeurs acceptées
[ISO/TS 19103:2005, définition 4.1.15]
4.2 Abréviations
DGIWG Digital Geospatial Information Working Group
DFDD Dictionnaire de données de caractéristiques du DGIWG
CEI Commission électrotechnique internationale
OHI Organisation hydrographique internationale
CT Comité technique
UML Langage de modélisation unifié
© ISO 2009 – Tous droits réservés 5

---------------------- Page: 11 ----------------------
ISO 19126:2009(F)
5 Concepts
5.1 Introduction
Un dictionnaire de concepts de caractéristiques décrit des concepts susceptibles d'être utilisés pour
caractériser des phénomènes réels. Les types de caractéristiques et de propriété des caractéristiques
peuvent donc être spécifiés grâce à ces concepts et documentés dans un catalogue de caractéristiques. La
présente Norme internationale spécifie un schéma de dictionnaire de concepts de caractéristiques (5.2
et Article 6).
L'ISO 19135 spécifie les procédures à suivre pour l'élaboration et le maintien des registres d'éléments
d'information géographique. Ces registres peuvent être utilisés pour prendre en charge la découverte de,
l'accès au, et l'utilisation du contenu des dictionnaires de concepts de caractéristiques et des catalogues de
caractéristiques. La présente Norme internationale spécifie un schéma relatif aux dictionnaires de concepts
de caractéristiques gérés par des registres et des informations à inclure dans les propositions
d'enregistrement d'éléments (Annexe C).
Une autorité unique peut devoir établir une suite de registres de dictionnaires de concepts de caractéristiques
et de catalogues de caractéristiques coordonnés qui partagent une structure commune, un programme de
codage et/ou une communauté d'intérêts. La présente Norme internationale spécifie un mécanisme
d'enregistrement composé pour prendre en charge ces exigences (5.3.3).
Les dictionnaires de concepts de caractéristiques et les catalogues de caractéristiques gérés par des
registres peuvent servir de sources de référence pour des registres similaires établis par d'autres
communautés d'information géographique dans le cadre d'un système de vérification de concordance. Les
registres de dictionnaires de concepts de caractéristiques et les registres de catalogues de caractéristiques
provenant de diverses communautés peuvent être organisés en partitions d'un registre hiérarchique. Sur la
base de l'ISO 19135, la présente Norme internationale spécifie un schéma pour un registre hiérarchique de
dictionnaires de concepts de caractéristiques et de catalogues de caractéristiques (5.5 et Article 8) et les
informations à inclure dans les propositions d'enregistrement d'éléments (Annexe C).
5.2 Dictionnaire de concepts de caractéristiques
Un dictionnaire de concepts de caractéristiques établit un ensemble de concepts susceptibles d'être utilisés
pour décrire des phénomènes réels, comprenant les concepts de caractéristique, les concepts d'attribut de
...

SLOVENSKI STANDARD
oSIST ISO/DIS 19126:2009
01-maj-2009
Geografske informacije - Slovarji in registri konceptov o pojavih
Geographic information - Feature concept dictionaries and registers
Information géographique - Dictionnaires de concepts de caracractéristiques et registres
Ta slovenski standard je istoveten z: ISO',6 19126:200
ICS:
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST ISO/DIS 19126:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO/DIS 19126:2009

---------------------- Page: 2 ----------------------
oSIST ISO/DIS 19126:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 19126
ISO/TC 211 Secretariat: SN
Voting begins on: Voting terminates on:
2007-12-06 2008-05-06
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geographic information — Feature concept dictionaries and
registers
Information géographique — Dictionnaires de concepts de caracractéristiques et registres
ICS 35.240.70

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2007

---------------------- Page: 3 ----------------------
oSIST ISO/DIS 19126:2009
ISO/DIS 19126
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2007 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST ISO/DIS 19126:2009
ISO/DIS 19126
Contents Page
Foreword .vi
Introduction.vii
1 Scope.1
2 Conformance.1
2.1 Introduction.1
2.2 Conformance for a feature concept dictionary .1
2.3 Conformance for a register of feature concept dictionaries and/or feature catalogues .1
3 Normative references.2
4 Terms, definitions, and abbreviations.2
4.1 Terms and definitions .2
4.2 Abbreviations.5
5 Concepts.5
5.1 Introduction.5
5.2 Feature concept dictionary .6
5.3 Registers .6
5.3.1 Overview.6
5.3.2 Register structure.6
5.3.3 Compound registry .6
5.3.4 Register management and registration.7
5.4 Feature concept dictionary register .7
5.5 Register of feature concept dictionary and feature catalogue registers.8
5.6 Relationship to data product specifications and application schemas .8
5.7 Community implementations .8
5.8 Notation .9
5.9 Packages .9
6 Feature concept dictionary schema.10
6.1 Introduction.10
6.2 CD_FeatureConceptDictionary .11
6.2.1 Introduction.11
6.2.2 scope .12
6.2.3 theme .12
6.2.4 fieldOfApplication.12
6.2.5 containedItem .13
6.3 CD_Scope.14
6.3.1 Introduction.14
6.3.2 name.14
6.3.3 description .14
6.4 CD_Concept .15
6.4.1 Introduction.15
6.4.2 category and member .15
6.4.3 relatedConcept .15
6.4.4 Subclasses.15
6.5 CD_ConceptRelationship .16
6.5.1 type.16
6.5.2 explanation.16
6.6 CD_ConceptRelationshipType.16
6.7 CD_FeatureConcept.16
6.7.1 Introduction.16
6.7.2 propertyConcept.17
© ISO 2007 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST ISO/DIS 19126:2009
ISO/DIS 19126
6.8 CD_FeaturePropertyConcept . 17
6.8.1 Introduction. 17
6.8.2 featureContext. 17
6.8.3 Subclasses . 17
6.9 CD_FeatureAttributeConcept . 17
6.9.1 Introduction. 17
6.9.2 dataType . 18
6.9.3 quantityMeasure . 18
6.9.4 value. 18
6.10 CD_NominalValueConcept . 18
6.10.1 Introduction. 18
6.10.2 attributeConcept . 19
6.11 CD_FeatureAssociationConcept. 19
6.11.1 Introduction. 19
6.11.2 role. 19
6.12 CD_FeatureRoleConcept . 20
6.12.1 Introduction. 20
6.12.2 roleName. 20
6.12.3 definition. 20
6.12.4 associationContext. 20
6.13 CD_FeatureOperationConcept . 20
6.13.1 signature. 20
7 Management of feature concept dictionaries as registers. 21
7.1 Introduction. 21
7.2 Item class for feature concepts. 21
7.3 Item class for feature attribute concepts . 21
7.4 Item class for nominal value concepts. 21
7.5 Item class for feature association concepts. 22
7.6 Item class for feature operation concepts . 22
8 Register of feature concept dictionaries and feature catalogues . 22
8.1 Introduction. 22
8.2 HR_FeatureInformationSubregisterDescription. 23
8.2.1 Introduction. 23
8.3 Item classes for feature information subregisters. 24
8.3.1 Introduction. 24
8.3.2 Item class for feature concept dictionaries . 24
8.3.3 Item class for feature data catalogues . 25
Annex A (informative) Feature concepts in dictionaries, catalogues, and application schemas. 26
Annex B (normative) Abstract test suite. 28
B.1 Introduction. 28
B.2 Test module for a feature concept dictionary. 28
B.3 Test module for a register of feature concept dictionaries and/or feature catalogues. 28
Annex C (normative) Information to be included in registration proposals . 29
C.1 Introduction. 29
C.2 Elements of information required for proposal to any register. 29
C.2.1 General elements of information required for all proposals. 29
C.2.2 Elements of information for all proposals to add new items to a register . 29
C.2.3 Elements of information required for proposals to clarify a registered item. 30
C.2.4 Elements of information required for proposals to supersede a registered item . 30
C.2.5 Elements of information required for proposals to retire a registered item . 30
C.3 Additional elements of information required for feature concept dictionary proposals . 31
C.3.1 Additional elements of information for proposals for feature concept items. 31
C.3.2 Additional elements of information for proposals for feature attribute concept items . 31
C.3.3 Additional elements of information for proposals for feature association concept items. 31
C.3.4 Additional elements of information for proposals for feature operation concept items . 32
C.3.5 Additional elements of information for proposals for nominal value concept items. 32
iv © ISO 2007 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST ISO/DIS 19126:2009
ISO/DIS 19126
C.4 Additional elements of information for proposals for feature information subregister
description items.32
C.4.1 Mandatory elements of information .32
C.4.2 Conditional elements of information.33
C.4.3 Optional elements of information .33
Annex D (informative) Example implementation of the feature concept dictionary schema as a
register.34
D.1 Introduction.34
D.2 DFDD Implementation of classes from ISO 19135 .34
D.2.1 Introduction.34
D.3 DFDD implementation of classes from this International Standard .35
D.4 DFDD extensions to ISO 19135 and this International Standard.35
Annex E (informative) UML notation .36
E.1 Introduction.36
E.2 Class .36
E.3 Stereotype .36
E.4 Attribute.37
E.5 Association .37
E.6 Role name .38
E.7 Navigability .38
E.8 Aggregation .38
E.9 Composition.38
E.10 Multiplicity.38
E.11 Generalization.39
E.12 Derived elements.40
E.13 Note.40
E.14 Constraint.40
Bibliography.41

© ISO 2007 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST ISO/DIS 19126:2009
ISO/DIS 19126
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19126 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.

vi © ISO 2007 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST ISO/DIS 19126:2009
ISO/DIS 19126
Introduction
This International Standard specifies a schema for geographic feature concept dictionaries managed as
registers. As described in ISO 19101, geographic features are abstractions of real world phenomena
associated with a location relative to the surface of the earth, about which data are collected, maintained, and
disseminated.
A feature concept dictionary provides basic definitions and related information about a set of concepts that
may be used to describe geographic features and shared across multiple application areas. Elements from a
feature concept dictionary may be re-used in one or more feature catalogues. A feature catalogue is often
associated with a particular application schema, product specification, and data set. It provides a complete
textual specification of a set of feature types and their properties and relationships. See Annex A for further
discussion of the relationships between feature concept dictionaries, feature catalogues, application schemas,
and product specifications.
ISO 19135 specifies procedures for the registration of items of geographic information. Items of geographic
information that may be registered are members of object classes specified in technical standards such as
those developed by ISO/TC 211. This International Standard defines object classes and specifies rules used
to establish and maintain feature concept dictionaries as ISO 19135 conformant register schemas.
ISO 19135 specifies the structure of a hierarchical register in which the principal register holds a set of items
that describe the subregisters. This International Standard specifies a schema for a hierarchical register where
the subregisters are feature concept dictionaries and/or feature catalogues. This International Standard
specifies an accompanying schema. The resulting hierarchical register may be used as a basis for
harmonization and the establishment of interoperability between different geographic information communities.
Feature concept dictionaries and feature catalogues maintained as registers may serve as sources of
reference for similar registers established by other geographic information communities as part of a system of
cross-referencing. Cross-referencing between respective items in registers of items of geographic information
may be difficult in cases where the structure of registers differs between information communities. This
International Standard may serve as a guide for different information communities to develop compatible
registers that can support a system of geographic information cross-referencing.
The Digital Geographic Information Working Group (DGIWG) community feature concept dictionary and
register is described as an example implementation of this International Standard.

© ISO 2007 – All rights reserved vii

---------------------- Page: 9 ----------------------
oSIST ISO/DIS 19126:2009

---------------------- Page: 10 ----------------------
oSIST ISO/DIS 19126:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 19126

Geographic information — Feature concept dictionaries and
registers
1 Scope
This International Standard specifies a schema for feature concept dictionaries to be established and
managed as registers. This International Standard does not specify schemas for feature catalogues or for the
management of feature catalogues as registers. However, because feature catalogue are often derived from
feature concept dictionaries, this International Standard does specify a schema for a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.