iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12195-2:2001

(Main)

Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

This Part of EN 12195 specifies safety requirements for web lashing made from man-made fibres with flat woven webbings for multiple use and of lashing combinations with woven webbings for the safe surface transport of goods on road vehicles, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof; specifies methods for testing of web lashing for securing of loads; etc.

Ladungssicherungseinrichtungen auf Straßenfahrzeugen -Sicherheit - Teil 2: Zurrgurte aus Chemiefasern

Dieser Teil der Norm EN 12195 - legt die Sicherheitsanforderungen fest für Zurrmittel aus Chemiefasern mit Gurten zur Mehrfachverwendung und Zurrkombinationen mit Gurten zum sicheren Transport von Ladungen auf Fahrzeugen, z.B. Lastkraftwagen und deren Anhängern, sowohl auf Straßen, auf Schiffen als auch per Bahn und/oder in entsprechender Kombination; - legt Prüfverfahren für Zurrmittel zur Ladungssicherung fest; usw.

Dispositifs d'arrimage des charges sur véhicules routiers -Sécurité - Partie 2: Sangles en fibres synthétiques

La présente partie de l'EN 12195 spécifie les prescriptions de sécurité relatives aux sangles d'arrimage en fibres synthétiques a sangles plates tissées pour usage multiple, ainsi qu'aux combinaisons d'amarrages a sangles destinées au transport de surface, et en toute sécurité, de marchandises par véhicules routiers par exemple, camions et remorques qui sont utilisées sur route ou situées sur navires, ou par chemin de fer et/ou combinaison de ces divers modes de transport; spécifie les méthodes d'essai des sangles d'arrimage des charges; etc.

Naprave za varovanje tovora na cestnih vozilih - Varnost - 2. del: Pleteni zategovalni pasovi iz umetnih vlaken

General Information

Status
Published
Publication Date
30-Apr-2001
ICS
53.080 - Storage equipment
55.180.99 - Other standards related to freight distribution of goods
Technical Committee
DTN - Lift and transport appliances
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2001
Due Date
01-May-2001
Completion Date
01-May-2001
Directive
TP198 - Pravilnik o cestnem pregledu tehnične brezhibnosti gospodarskih vozil
Ref Project
EN 12195-2:2000 - Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

Buy Standard

EN 12195-2:2001EN 12195-2:2001
PreviousNext
Standard
EN 12195-2:2001
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naprave za varovanje tovora na cestnih vozilih - Varnost - 2. del: Pleteni zategovalni pasovi iz umetnih vlakenLadungssicherungseinrichtungen auf Straßenfahrzeugen -Sicherheit - Teil 2: Zurrgurte aus ChemiefasernDispositifs d'arrimage des charges sur véhicules routiers -Sécurité - Partie 2: Sangles en fibres synthétiquesLoad restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres55.180.99Drugi standardi v zvezi z distribucijo blaga s prevozomOther standards related to freight distribution of goods53.080Storage equipmentICS:Ta slovenski standard j
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12195-4:2004(Main)
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12195-4:2003

This Part 4 of EN 12195
- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;
- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;
- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12195-3:2001(Main)
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 12195-3:2001

This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking  of the maximum hand-operating force.
This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12195-1:2008(Main)
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of securing forces
prEN 12195-1

This Part of prEN 12195 specifies acceleration coefficients for surface transport. It also gives methods of calculation of lashing forces acting on goods on load carriers, lorries, trailers and swap bodies, either on road, on vessels or by rail and/or combinations thereof for different types of load and different types of lashing. It  excludes the hump shunting during railway transport (web lashings see EN 12195-2, lashing chains see EN 12195-3, wire lashing ropes see prEN 12195-4).
The lashing forces to be chosen for calculation in this EN 12195-1 are static forces produced by tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Instructions for the application of calculations are also specified.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12195-4:2004(Main)
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12195-4:2003

This Part 4 of EN 12195
- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;
- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;
- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12195-3:2001(Main)
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 12195-3:2001

This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking  of the maximum hand-operating force.
This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12195-1:2008(Main)
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of securing forces
prEN 12195-1

This Part of prEN 12195 specifies acceleration coefficients for surface transport. It also gives methods of calculation of lashing forces acting on goods on load carriers, lorries, trailers and swap bodies, either on road, on vessels or by rail and/or combinations thereof for different types of load and different types of lashing. It  excludes the hump shunting during railway transport (web lashings see EN 12195-2, lashing chains see EN 12195-3, wire lashing ropes see prEN 12195-4).
The lashing forces to be chosen for calculation in this EN 12195-1 are static forces produced by tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Instructions for the application of calculations are also specified.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE   This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61340-2-3:2016/AC:2023(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)
EN 61340-2-3:2016/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14002-2:2023(Main)
Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
EN ISO 14002-2:2023

This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day