iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1560:1998

(Main)

Founding - Designation system for cast iron - Material symbols and material numbers

Founding - Designation system for cast iron - Material symbols and material numbers

This European Standard establishes a material designation system either by symbols or by numbers for cast iron. The designation system by symbols is applicable to a) standardized cast iron materials (see 3.1); b) non-standardizedcast iron materials (see 3.2). The designation system by numbers is only applicable to standardized cast iron materials (see 3.1). NOTE: The standardized designation by symbols does not necessarily imply that the materials is standardized.

Gießereiwesen - Bezeichnungssystem für Gußeisen - Werkstoffkurzzeichen und Werkstoffnummern

Diese Europäische Norm legt ein Werkstoff-Bezeichnungssystem entweder durch Kurzzeichen oder durch Nummern für Gußeisen fest. Das Bezeichnungssystem ist anwendbar für: a) genormte Gußeisenwerkstoffe (siehe 3.1); b) nichtgenormte Gußeisenwerkstoffe (siehe 3.2). Das Bezeichnungssystem durch Nummern ist nur für genormte Gußeisenwerkstoffe anwendbar (siehe 3.1). ANMERKUNG: Die genormte Bezeichnung durch Kurzzeichen bedeutet nicht zwangsläufig, daß der Werkstoff genormt ist.

Fonderie - Systeme de désignation pour la fonte - Désignation symbolique et numérique

La présente Norme Européenne définit un systeme de désignation des fontes par des symboles ou par des numéros. Le systeme de désignation par symboles s'applique : a) aux fontes normalisées (voir 3.1); b) aux fontes non normalisées (voir 3.2). Le systeme de désignation par numéros ne s'applique qu'aux fontes normalisées (voir 3.1). NOTE: La désignation normalisée par symboles n'implique pas que la fonte est normalisée.

Livarstvo - Sistem označevanja železove litine - Označevalni simboli in številke za material

General Information

Status
Withdrawn
Publication Date
31-Jul-1998
Withdrawal Date
19-Sep-2011
ICS
77.080.10 - Irons
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-Sep-2011
Due Date
08-Oct-2011
Completion Date
20-Sep-2011
Ref Project
EN 1560:1997 - Founding - Designation system for cast iron - Material symbols and material numbers

Relations

Replaced By
SIST EN 1560:2011 - Founding - Designation system for cast iron - Material symbols and material numbers
Effective Date
01-Nov-2011
Replaced By
SIST EN 1560:2011 - Founding - Designation system for cast iron - Material symbols and material numbers
Effective Date
08-Jun-2022

Buy Standard

EN 1560:1998EN 1560:1998
PreviousNext
Standard
EN 1560:1998
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PDWHULDOGießereiwesen - Bezeichnungssystem für Gußeisen - Werkstoffkurzzeichen und WerkstoffnummernFonderie - Systeme de désignation pour la fonte - Désignation symbolique et numériqueFounding - Designation system for cast iron - Material symbols and material numbers77.080.10ŽelezoIronsICS:Ta slo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11652:2022(Main)
Steel and iron - Determination of cobalt content - Flame atomic absorption spectrometric method (ISO 11652:1997)
EN ISO 11652:2022

This International Standard specifies a flame atomic absorption spectrometric method for the
determination of the cobalt content in steel and iron.
The method is applicable to cobalt contents between 0,003 % (m/m) and 5,0 % (m/m).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 945-1:2019(Main)
Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2019)
EN ISO 945-1:2019

This document specifies a method of classifying the microstructure of graphite in cast irons by
comparative visual analysis.
The purpose of this document is to provide information about the method of graphite classification. It
is not intended to give information on the suitability of cast-iron types and grades for any particular
application.
The particular material grades are specified mainly by mechanical properties and, in the case of
austenitic and abrasion resistant cast irons, by their chemical composition. The interpretation
of graphite form and size does not allow a statistically valid statement on the fulfilment of the
requirements specified in the relevant material standard.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1563:2018(Main)
Founding - Spheroidal graphite cast irons
EN 1563:2018

This draft European Standard defines the grades and the corresponding requirements for spheroidal graphite cast irons.
This draft European Standard specifies 2 groups of spheroidal graphite cast iron grades by a classification based on mechanical properties measured on machined test pieces prepared from cast samples. The first group deals mainly with ferritic to pearlitic grades. The second group deals with solid-solution strengthened ferritic grades.
This draft European Standard does not cover technical delivery conditions for iron castings (see EN 1559 1 [3] and EN 1559 3 [4]).
This draft European Standard does not cover all aspects of:
-   ausferritic spheroidal graphite cast irons which are specified in EN 1564 [5];
-   low alloyed ferritic spheroidal graphite cast irons which are specified in EN 16124 [6];
-   continuous cast iron bars which are specified in EN 16482 [7];
-   austenitic cast irons which are specified in EN 13835 [8];
-   spheroidal graphite cast irons used for pipes, fittings and their joints which are the subject of EN 545 [9], EN 598 [10] and EN 969 [11];
-   the grades of spheroidal graphite cast irons as specified in EN 545 which are used for products such as industrial valves, non-industrial manually operated shut-off valves and flanges and their joints, which are the subject of the applicable European product standards.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13835:2012(Main)
Founding - Austenitic cast irons
EN 13835:2012

This European Standard specifies the grades and corresponding requirements of austenitic cast irons. These requirements are specified in terms of: - graphite form and metal structure: either flake or spheroidal graphite in an austenitic matrix; - chemical composition: as given for each of the grades; - mechanical properties: obtained from separately cast samples.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 10353:2012(Main)
Chemical analysis of ferrous materials - Analysis of Ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
CEN/TR 10353:2011

This Technical Report describes an inductively coupled plasma optical emission spectrometric method for the determination of Al, Ti and P contents in Ferro Silicon materials.
The method is applicable to:
- Al content between 0,2 and 2 %;
- Ti content between 0,02 and 0,25 %;
- P content between 0,005 and 0,05 %.
This Technical Report also describes the general requirements for analysis by inductively coupled plasma optical emission spectrometry, the preparation and dissolution of the test sample and the method of calculation of the results.
The procedure is valid for the analytical lines given in Table 1. This table also gives, for each line, the spectral interferences, which must be accurately corrected.
NOTE   The interferences extend as well as other possible interferences depend on the temperature in the plasma and on the optical resolution of the spectrometer used.
Table 1 - Spectral lines suggested together with the interferences which shall be corrected
Element   Wavelength (nm)   Interferences
Al   308,22   V
Ti   337,28   V, Ni
P   178,29   Mo

  • Technical report
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 10354:2012(Main)
Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
CEN/TR 10354:2011

This Technical Report describes a X-ray fluorescence (XRF) spectrometric method for the determination of Si and Al contents in Ferro Silicon materials.
The method is applicable to:
- Si content between 40 and 90 %;
- Al content between 0,5 and 6 %.
The Technical Report specifies the general requirements for analysis by X-ray fluorescence spectrometry and the preparation of the test sample.
The correction of the spectrometric measurement from spectral interferences on the analytical lines used is essential. This Technical Report is valid for the analytical lines:
- Si Kα 7.126 (for element contents between 45 and 90 %);
- Al Kα 8.339 (for element contents between 0,8 and 6 %);
- Fe Kα 1.937 (for element contents between 10 and 58 %).
NOTE   For matrix matching purposes, iron is included in the analytical program to be prepared.
Within the conditions here above, spectral interferences don’t need to be calculated.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1560:2011(Main)
Founding - Designation system for cast iron - Material symbols and material numbers
EN 1560:2011

This European Standard establishes a material designation system either by symbols or by numbers for cast iron. The designation system by symbols is applicable to a) standardized cast iron materials (see 3.1); b) non-standardized cast iron materials (see 3.2). The designation system by numbers is only applicable to standardized cast iron materials (see 3.1). NOTE: The standardized designation by symbols does not necessarily imply that the materials is standardized

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12513:2011(Main)
Founding - Abrasion resistant cast irons
EN 12513:2011

This European Standard defines the grades of abrasion resistant white cast irons. It also specifies the grades in terms of: - chemical composition - hardness. The types of abrasion resistant white cast irons covered by this standard are: a) unalloyed or low cast irons; b) nickel chromium cast irons covering two general types: - 4 % Ni 2 % Cr cast irons; - 9 % Cr 5 % Ni cast irons; c) high chromium cast irons covering four ranges of chromium content.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10001:2000(Main)
Definition and classification of pig-irons
EN 10001:1990

This annex is applicable to pig-iron in the solid state, unless otherwise agreed at the time of ordering

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 16079:2022(Main)
Founding - Compacted (vermicular) graphite cast irons
FprEN 16079

This document defines the grades and the corresponding requirements for compacted (vermicular) graphite cast irons.
This document specifies 4 grades of compacted (vermicular) graphite cast iron by a classification based on the minimum mechanical properties measured on machined test pieces prepared from cast samples or samples cut from a casting.
This document does not cover technical delivery conditions for iron castings (see EN 1559-1 [1] and EN 1559-3 [2]).

  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day