SIST EN 15061:2008

Oznaka standarda: SIST EN 15061:2008
Koda projekta: 00322010
Organizacija: SIST
Naslov (angleški): Safety of machinery - Safety requirements for strip processing line machinery and equipment
Naslov (slovenski): Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 15061:2008 angleški jezik Withdrawn SIST-M: 119.79 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 13.110 77.180
Status: Razveljavljen
Objavljen: 01-apr-2008
Refer. št. objave: Sporočila 2008-04
Razveljavitev: 01-jan-2009
Referenca razveljavitve: Sporočila 2009-01
Referenčna oznaka: EN 15061:2007
Področje projekta (angleško): This European Standard describes the health and safety requirements of automated lines (see 3.7 and 3.13) used for strip processing. It describes the foreseeable, significant hazards, hazardous situations, and events arising from lines and from particular machines integrated to form the line; it does not describe the fully health and safety requirements for each particular machine. It indicates the possible preventative measures for avoiding or reducing the risks. This document specifies the requirements to ensure the safety of persons which are to be met during the de-sign, assembly, transport, commissioning, operation, maintenance and decommissioning of the equipment. It deals not only with circumstances where the machinery is used as intended, but also includes other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse. This standard assumes that the installations are operated and maintained by adequately trained competent personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use. This standard applies to: Automated lines for processing of metal strip: from take-over point (see 3.6) of the entry section (terminal equipment, see 3.4) through the process (processing and terminal equipment, see 3.5) up to the take-over point of the exit section or interface to other lines (terminal equipment). Terminal Equipment for: Processing and Terminal Equipment for: Terminal Equipment for: Entry section 3 Pickling (5.3.5) 3 Cleaning/degreasing (5.3.6) 3 Hot dipping (5.3.7) 3 Electro plating (5.3.8) 3 Tension levelling/scale breaking (5.3.9) 3 Organic coating (5.3.10) 3 Chemical post-treating (5.3.11) Exit section For annealing lines, the requirements related to the entry and the exit section are applicable, but the process of annealing is not covered by this standard (see EN 746 series). This standard does not cover: 3 The complete risk assessment of s
Povezava na standarde
Povezava Ime Datum
Dopolnjen z SIST EN 15061:2008/kprA1:2008 - Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov 19-sep-2008
Konsolidiran z SIST EN 15061:2008+A1:2009 - Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov 01-jan-2009


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi