SIST EN 60838-2-2:2006

SLOVENSKI SIST EN 60838-2-2:2006

STANDARD
oct 2006
Različni okovi žarnic in sijalk – 2-2. del: Posebne zahteve – Konektorji za
module LED (IEC 60838-2-2:2006)
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for
LED-modules (IEC 60838-2-2:2006)
ICS 29.140.10 Referenčna številka
SIST EN 60838-2-2:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60838-2-2

NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM

ICS 29.140.10; 31.220.10


English version


Miscellaneous lampholders
Part 2-2: Particular requirements -
Connectors for LED-modules
(IEC 60838-2-2:2006)


Douilles diverses pour lampes  Sonderfassungen
Partie 2-2: Règles particulières - Teil 2-2: Besondere Anforderungen -
Connecteurs pour modules DEL Verbinder für LED-Module
(CEI 60838-2-2:2006) (IEC 60838-2-2:2006)




This European Standard was approved by CENELEC on 2006-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60838-2-2:2006 E

---------------------- Page: 2 ----------------------

EN 60838-2-2:2006 - 2 -
Foreword
The text of document 34B/1229/FDIS, future edition 1 of IEC 60838-2-2, prepared by SC 34B, Lamp caps
and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60838-2-2 on 2006-06-01.
This part 2-2 is to be used in conjunction with the latest edition of EN 60838-1 and its amendments. It was
established on the basis of EN 60838-1:2004.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60838-2-2:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60838-2-2:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60068-2-6 1995 Environmental testing EN 60068-2-6 1995
+ corr. March 1995 Part 2: Tests - Test Fc: Vibration (sinusoidal)


1)
IEC 60068-2-14 1984 Environmental testing EN 60068-2-14 1999
Part 2: Tests - Test N: Change of temperature


IEC 60068-2-30 2005 Environmental testing EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)




1)
EN 60068-2-14 includes A1 to IEC 60068-2-14.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



60838-2-2
INTERNATIONAL


Première édition
STANDARD

First edition

2006-05


Douilles diverses pour lampes –
Partie 2-2:
Règles particulières –
Connecteurs pour modules DEL

Miscellaneous lampholders –
Part 2-2:
Particular requirements –
Connectors for LED-modules

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60838-2-2  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 General .9
2 Definitions .9
3 General requirement.9
4 General conditions for tests.11
5 Standard ratings .11
6 Classification.11
7 Marking .11
8 Protection against electric shock .11
9 Terminals .11
10 Provision for earthing .11
11 Construction .11
12 Moisture resistance, insulation resistance and electric strength.13
13 Mechanical strength .13
14 Screws, current carrying parts and connections.13
15 Creepage distances and clearances .13
16 Endurance.13
17 Resistance to heat and fire.15
18 Resistance to excessive residual stresses (season cracking) and to rusting .15
19 Vibrations .16

---------------------- Page: 6 ----------------------

60838-2-2  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MISCELLANEOUS LAMPHOLDERS –

Part 2-2: Particular requirements –
Connectors for LED-modules


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall b
...