Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:2020)

This document specifies requirements for the ventilation of petrol engine and petrol tank compartments
in small craft having petrol engines for propulsion, electrical generation or mechanical power, to prevent
the accumulation of explosive gases in these compartments. Personal watercraft are not covered in this
document.

Kleine Wasserfahrzeuge - Belüftung von Räumen mit Ottomotoren und/oder Benzintanks (ISO 11105:2020)

Dieses Dokument legt Anforderungen an die Belüftung von Räumen fest, in denen Ottomotoren und Benzintanks installiert sind und die sich auf kleinen Wasserfahrzeugen befinden, welche Ottomotoren zum Vortrieb, zur Erzeugung elektrischer Energie oder zur Erzeugung mechanischer Energie haben; die Anforderungen dienen dazu, der Ansammlung von explosiven Gasen vorzubeugen. Wasserskooter sind ausgenommen.

Petits navires - Ventilation des compartiments contenant des moteurs à essence et/ou réservoirs à essence (ISO 11105:2020)

Le présent document spécifie les exigences relatives à la ventilation des compartiments contenant des moteurs à essence et des réservoirs à essence sur les petits navires munis de moteurs à essence pour la propulsion, la génération électrique ou la puissance mécanique, afin de prévenir l'accumulation de gaz explosifs dans ces compartiments. Les motos aquatiques ne sont pas couvertes par ce document.

Mala plovila - Zračenje bencinskega motorja in/ali prostorov za bencinski tank (ISO 11105:2020)

General Information

Status
Published
Public Enquiry End Date
23-Dec-2018
Publication Date
23-Apr-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Apr-2020
Due Date
14-Jun-2020
Completion Date
24-Apr-2020

Relations

Buy Standard

Standard
EN ISO 11105:2020
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11105:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11105:2020
01-junij-2020
Nadomešča:
SIST EN ISO 11105:2017
Mala plovila - Zračenje bencinskega motorja in/ali prostorov za bencinski tank (ISO
11105:2020)
Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO
11105:2020)
Kleine Wasserfahrzeuge - Belüftung von Räumen mit Ottomotoren und/oder Benzintanks
(ISO 11105:2020)
Petits navires - Ventilation des compartiments contenant des moteurs à essence et/ou
réservoirs à essence (ISO 11105:2020)
Ta slovenski standard je istoveten z: EN ISO 11105:2020
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 Čolni Small craft
SIST EN ISO 11105:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11105:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 11105:2020


EN ISO 11105
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 11105:2017
English Version

Small craft - Ventilation of petrol engine and/or petrol
tank compartments (ISO 11105:2020)
Petits navires - Ventilation des compartiments Kleine Wasserfahrzeuge - Belüftung von Räumen mit
contenant des moteurs à essence et/ou des réservoirs Ottomotoren und/oder Benzintanks (ISO 11105:2020)
à essence (ISO 11105:2020)
This European Standard was approved by CEN on 14 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11105:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11105:2020
EN ISO 11105:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11105:2020
EN ISO 11105:2020 (E)
European foreword
This document (EN ISO 11105:2020) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11105:2017.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11105:2020 has been approved by CEN as EN ISO 11105:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 11105:2020
EN ISO 11105:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
M/542/C(2015) 8736 final to provide one voluntary means of conforming to essential requirements of
Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex I of Directive 2013/53/EU
Essential Requirements of Clause(s)/sub-clause(s) Remarks/Notes
Directive 2013/53/EU of this EN
Annex I.A.2.5 - Owner's manual 7
Annex I.A.5.1.2 – Installation 1, 2, 3, 4, 5, 6 These clauses of this standard
requirements, ventilation of address the ventilation
engine compartments requirements for petrol engine
compartments only. They do not
address the risk of downflooding
and sinking through ventilation
fittings as required by Annex
I.A.3.5 (b) – Flooding.
Annex I.A.5.2.2 – Fuel system, 1, 2, 3, 4, 5, These clauses of this standard
fuel tanks address the ventilation
requirements for petrol tank fuel
tank spaces only.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

4

---------------------- Page: 6 ----------------------
SIST EN ISO 11105:2020
INTERNATIONAL ISO
STANDARD 11105
Third edition
2020-03
Small craft — Ventilation of
petrol engine and/or petrol tank
compartments
Petits navires — Ventilation des compartiments contenant des
moteurs à essence et/ou des réservoirs à essence
Reference number
ISO 11105:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 11105:2020
ISO 11105:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 11105:2020
ISO 11105:2020(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 2
5 Natural ventilation systems . 3
6 Powered ventilation systems . 5
7 Owner's manual . 7
Annex A (normative) Blower rating determination . 9
Bibliography .10
© ISO 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 11105:2020
ISO 11105:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 188, Small craft.
This third edition cancels and replaces the second edition (ISO 11105:1997), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— definitions have been added under Clause 3;
— several clauses of the standard have been re-organized for clarity;
— subclauses 4.4, 4.6, 4.9, 4.10, 4.11, 4.12, 4.13, 4.14, 4.15, 6.2, 6.4, 6.6, 6.7, 6.8 and 6.9 have been added;
— subclauses 4.1, 4.2, 4.5, 4.7, 5.1, 5.2, 6.3, 6.10 have been amended;
— Table 2 has been added;
— Annex A has been added.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 11105:2020
INTERNATIONAL STANDARD ISO 11105:2020(E)
Small craft — Ventilation
...

SLOVENSKI STANDARD
oSIST prEN ISO 11105:2018
01-december-2018
0DODSORYLOD=UDþHQMHEHQFLQVNHJDPRWRUMDLQDOLSURVWRURY]DEHQFLQVNLWDQN
,62',6
Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO/DIS
11105:2018)
Kleine Wasserfahrzeuge - Belüftung von Räumen mit Ottomotoren und/oder Benzintanks
(ISO/DIS 11105:2018)
Petits navires - Ventilation des compartiments contenant des moteurs à essence et/ou
réservoirs à essence (ISO/DIS 11105:2018)
Ta slovenski standard je istoveten z: prEN ISO 11105
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
oSIST prEN ISO 11105:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11105:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11105:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11105
ISO/TC 188/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2018-10-01 2018-12-24
Small craft — Ventilation of petrol engine and/or petrol
tank compartments
Navires de plaisance — Ventilation des compartiments moteur à essence et/ou réservoir à essence
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11105:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11105:2018
ISO/DIS 11105:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11105:2018
ISO/DIS 11105:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 2
5 Natural ventilation systems . 3
6 Powered ventilation systems . 5
7 Owner's manual . 6
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 8
© ISO 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11105:2018
ISO/DIS 11105:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 188, Small craft, Subcommittee SC 2,
Engines and propulsion systems.
This third edition cancels and replaces the second edition (ISO 11105:1997).
The main changes compared to the previous edition are as follows:
— definitions have been added under section 3;
— several sections of the standard have been re-organized for clarity;
— subclauses 4.4, , 4.6, 4.9, 4,11, 4.13, 5.1, 6.1, 6.4, 6.6, 6.7, 6.8 and 6.9 have been added;
— subclauses 4.7, 4.10, 5.1, 6.10 have been amended.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2018 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11105:2018
DRAFT INTERNATIONAL STANDARD ISO/DIS 11105:2018(E)
Small craft — Ventilation of petrol engine and/or petrol
tank compartments
1 Scope
This document specifies requirements for ventilation of petrol engine and petrol tank compartments in
small craft, having petrol engines for propulsion, electrical generation or mechanical power, to prevent
accumulation of explosive gases in these compartments. Personal watercraft are not covered in this
document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 8846, Small craft — Electrical devices — Protection against ignition of surrounding flammable gases
ISO 11192, Small craft — Graphical symbols
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
habitable space
space surrounded by permanent structure in which there is provision for any of the following activities:
sleeping, cooking, eating, washing/toilet, navigation, steering
Note 1 to entry: Spaces intended exclusively for storage, open cockpits with or without canvas enclosures and
engine rooms are not included.
3.2
net compartment volume
the result of subtracting the volume of the permanently installed items of equipment and accessories
from the total, or gross, compartment volume
3.3
nominal voltage
those commonly used voltages such as 6, 12, 24 and 32 volts DC
3.4
open to the atmosphere
2
compartment or space having at least 0,34 m of permanent open area directly exposed to the
atmosphere for each cubic meter of net compartment volume
3.5
permanently installed
securely fastened so that tools, such as wrenches and screwdrivers, must be used for removal
© ISO 2018 – All rights reserved 1

---------------------- Page: 7 ----------------------
oSIST prEN ISO 11105:2018
ISO/DIS 11105:2018(E)

3.6
ventilation
the changing of air within a compartment by natural or mechanical means
Note 1 to entry: Ventilation may be effected by dilution of contaminated air, by local exhaust of contaminated
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.