Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers

This European Standard applies to transportable motor-operated electric tools and deals with the measurement procedure for planers and thicknessers for measurements of dust emission.

Motorbetriebene Elektrowerkzeuge – Staubmessverfahren – Teil 3-3: Besondere Anforderungen für transportable Abrichthobel und Dickenhobel

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 3-3: Exigences particulières pour les raboteuses et les dégauchisseuses transportables

L’article de la Partie 1 est applicable avec l'exception suivante:
Addition:
La présente partie de l'EN 50632 s'applique aux raboteuses et aux dégauchisseuses transportables destinées à raboter le bois.

Elektromotorna orodja - Postopek merjenja prahu - 3-3. del: Posebne zahteve za premične skobeljnike in debelinke

Ta evropski standard se uporablja za prenosna elektromotorna orodja ter obravnava postopek merjenja prahu za skobeljnike in debelinke.

General Information

Status
Published
Public Enquiry End Date
31-Mar-2016
Publication Date
19-Jan-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Jan-2017
Due Date
25-Mar-2017
Completion Date
20-Jan-2017

Buy Standard

Standard
EN 50632-3-3:2017
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Outils électriques à moteur - Procédure de mesure de la poussière - Partie 3-3: Exigences particulières pour les raboteuses et les dégauchisseuses transportablesElectric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers25.140.20Electric tools25.100.25Orodja za glajenje in ravnalna orodjaTools for planing and broaching machinesICS:Ta slovenski standard je istoveten z:EN 50632-3-3:2017SIST EN 50632-3-3:2017en01-marec-2017SIST EN 50632-3-3:2017SLOVENSKI
STANDARD



SIST EN 50632-3-3:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50632-3-3
January 2017 ICS 13.040.40; 79.120.10
English Version
Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 3-3: Exigences particulières pour les raboteuses et les dégauchisseuses
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 3-3: Besondere Anforderungen für transportable Abrichthobel und Dickenhobel This European Standard was approved by CENELEC on 2016-11-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Sebia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50632-3-3:2017 E SIST EN 50632-3-3:2017



EN 50632-3-3:2017 (E) 2 Contents Page European foreword .3 European foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Test procedure .4 5 Instrumentation .6 6 Information to be reported .6 Tables Table 101 — Operating conditions for transportable planers .5 Table 102 — Operating conditions for transportable thicknessers .6 SIST EN 50632-3-3:2017



EN 50632-3-3:2017 (E) 3 European foreword This document (EN 50632-3-3:2017) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools”. The following dates are fixed: • latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) [2017-11-14] • latest date by which the national standards conflicting with the EN have to be withdrawn (dow) [2018-11-14] This European Standard is divided into three parts: Part 1: General requirements for the dust measurement which are common to electric motor-operated tools (for the purpose of this standard referred to simply as tools); Part 2 or 3: Requirements for the dust measurement for particular types of tools, which either supplement or modify the requirements given in Part 1 to account for the particular characteristics of these specific tools. This Part 3 is to be used in conjunction with EN 50632-1:2015. This Part 3 supplements or modifies the corresponding clauses in EN 50632-1:2015. This Part 3 was developed to set out requirements for the measurement of the concentration for inhalable and respirable dust emitted by transportable planers and thicknessers. Where a particular subclause of Part 1 is not mentioned in this Part 3, that subclause applies as far as reasonable. When t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.