SIST EN ISO 13255:2018

SLOVENSKI STANDARD
SIST EN ISO 13255:2018
01-januar-2018
1DGRPHãþD
SIST EN 1054:1997
Plastomerni cevni sistemi za odpadno vodo in kanalizacijo v stavbah - Metoda za
preskus zrakotesnosti spojev (ISO 13255:2010)
Thermoplastics piping systems for soil and waste discharge inside buildings - Test
method for airtightness of joints (ISO 13255:2010)
Rohrleitungssysteme aus Thermoplasten zum Ableiten von Abwasser innerhalb von
Gebäuden - Prüfverfahren für die Gasdichtheit von Verbindungen (ISO 13255:2010)
Systèmes de canalisations thermoplastiques pour évacuation des eaux-vannes et des
eaux usées à l'intérieur des bâtiments - Méthode d'essai de l'étanchéité des
assemblages à l'air (ISO 13255:2010)
Ta slovenski standard je istoveten z: EN ISO 13255:2017
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.80 Drenažni sistemi Drainage systems
SIST EN ISO 13255:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13255:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 13255:2018


EN ISO 13255
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2017
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.80 Supersedes EN 1054:1995
English Version

Thermoplastics piping systems for soil and waste
discharge inside buildings - Test method for airtightness of
joints (ISO 13255:2010)
Systèmes de canalisations thermoplastiques pour Rohrleitungssysteme aus Thermoplasten zum Ableiten
évacuation des eaux-vannes et des eaux usées à von Abwasser innerhalb von Gebäuden - Prüfverfahren
l'intérieur des bâtiments - Méthode d'essai de für die Gasdichtheit von Verbindungen (ISO
l'étanchéité des assemblages à l'air (ISO 13255:2010) 13255:2010)
This European Standard was approved by CEN on 19 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13255:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13255:2018
EN ISO 13255:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13255:2018
EN ISO 13255:2017 (E)
European foreword
The text of ISO 13255:2010 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes,
fittings and valves for the transport of fluids” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 13255:2017 by Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1054:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13255:2010 has been approved by CEN as EN ISO 13255:2017 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 13255:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 13255:2018

INTERNATIONAL ISO
STANDARD 13255
First edition
2010-05-01

Thermoplastics piping systems for soil
and waste discharge inside buildings —
Test method for airtightness of joints
Systèmes de canalisations thermoplastiques pour évacuation des eaux-
vannes et des eaux usées à l'intérieur des bâtiments — Méthode
d'essai de l'étanchéité des assemblages à l'air




Reference number
ISO 13255:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 13255:2018
ISO 13255:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 13255:2018
ISO 13255:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International orga
...