Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components

This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics. This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures.
The components can be used directly or in construction works or as structural components in the form of kits. This European Standard applies to series and non-series structural components including kits. The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e.g. anodising of aluminium. This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4. This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems. NOTE   For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.

Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 1: Konformitätsnachweisverfahren für tragende Bauteile

Diese Europäische Norm legt Anforderungen an den Konformitätsnachweis von Stahlbauteilen, Aluminium-bauteilen und Bausätzen fest, die als Bauprodukte in Verkehr gebracht werden. Der Konformitätsnachweis umfasst die Herstellungsmerkmale und, sofern erforderlich, Tragfähigkeitsmerkmale.
Diese Europäische Norm befasst sich ebenfalls mit dem Konformitätsnachweis von Stahlbauteilen, die in Verbundtragwerken aus Stahl und Beton verwendet werden.
Bauteile können entweder direkt verwendet werden, in Tragwerke eingebaut oder als Bausätze verwendet werden.
Diese Europäische Norm gilt für tragende Bauteile, die serienmäßig oder nicht serienmäßig hergestellt werden, sowie für Bausätze.
Die Bauteile können aus warmgewalzten oder kaltgeformten oder mittels anderer Technologien hergestellten Konstruktionsmaterialien hergestellt werden. Sie können aus Querschnitten/Profilen unterschiedlicher Form, aus Flachmaterial (Platten, Bleche, Band), Stäben, Guss- oder Schmiedestücken aus Stahl- oder Aluminiumwerkstoffen hergestellt werden. Sie können ungeschützt, durch Beschichtung oder durch eine andere Oberflächenbehandlung, z. B. durch Eloxieren beim Aluminium, korrosionsgeschützt sein.
Diese Europäische Norm befasst sich auch mit kaltgeformten tragenden Bauteilen und Profiltafeln nach EN 1993-1-3 und EN 1999-1-4.
Diese Europäische Norm gilt nicht für den Konformitätsnachweis von Bauteilen für abgehängte Decken sowie für Schienen und Schwellen von Eisenbahnsystemen.
ANMERKUNG   Für bestimmte Stahl- und Aluminiumbauteile sind besondere Regelungen bezüglich Leistungs-merkmalen sowie weitere Anforderungen festgelegt worden. Diese Festlegungen können in Form einer EN oder als Abschnitte in einer EN vorliegen. So enthält z. B. die EN 13084-7 Regelungen für einschalige Schornsteine aus Stahl und Stahlinnenrohre. Derartige Sonderregelungen haben Vorrang gegenüber dieser Europäischen Norm.

Exécution des structures en acier et des structures en aluminium - Partie 1: Exigences pour l'évaluation de la conformité des éléments structuraux

La présente Norme européenne spécifie les exigences pour l’évaluation de la conformité aux caractéristiques
de performance pour des éléments structuraux en acier et en aluminium ainsi que pour des kits mis sur le
marché en tant que produits de construction. L’évaluation de la conformité couvre les caractéristiques de
fabrication, et si nécessaire les caractéristiques de calcul structural.
La présente Norme européenne couvre également l’évaluation de la conformité des éléments en acier utilisés
dans les structures mixtes acier-béton.
Les éléments peuvent être utilisés directement ou être inclus dans des ouvrages de construction ou en tant
qu’éléments structuraux sous forme de kits.
La présente Norme européenne s’applique aux éléments structuraux de série ou non, y compris les kits.
Les éléments peuvent être fabriqués à partir de produits laminés à chaud ou formés à froid ou produits à partir
d’autres technologies. Ils peuvent être produits à partir de produits longs/profilés de différentes formes,
produits plats (plaques, tôle, bande), barres, pièces moulées, pièces forgées en acier et en aluminium, non
protégés ou protégés contre la corrosion par revêtement ou autre traitement de surface, par exemple
anodisation de l’aluminium.
La présente Norme européenne couvre les profilés et plaques formés à froid tels que définis dans
l’EN 1993-1-3 et l’EN 1999-1-4.
La présente Norme européenne ne couvre pas l’évaluation de la conformité d’éléments pour plafonds
suspendus, de rails ou traverses pour usages ferroviaires.
NOTE Pour certains éléments en acier et en aluminium, des spécifications particulières pour les performances et
d'autres exigences ont été développées. Les spécifications particulières peuvent être publiées en tant qu’EN ou en tant
qu'articles d’une EN.

Izvedba jeklenih in aluminijastih konstrukcij - 1. del: Zahteve za ugotavljanje skladnosti sestavnih delov konstrukcij

Ta evropski standard določa zahteve za ugotavljanje skladnosti značilnosti delovanja za sestavne dele jeklenih in aluminijastih konstrukcij ter za komplete, dane na tržišče kot konstrukcijski izdelki. Ugotavljanje skladnosti zajema značilnosti proizvodnje in, kjer je to primerno, značilnosti projektiranja konstrukcij. Ta evropski standard zajema tudi ugotavljanje skladnosti jeklenih sestavnih delov, ki se uporabljajo pri kompozitnih jeklenih in betonskih konstrukcijah. Sestavni deli se lahko uporabljajo neposredno ali pri konstrukcijskih delih ali pa kot sestavni deli konstrukcij v obliki kompletov. Ta evropski standard velja za serijske in neserijske sestavne dele konstrukcij, vključno s kompleti. Sestavni deli so lahko izdelani iz vroče valjanih ali hladno oblikovanih sestavnih izdelkov ali sestavnih izdelkov, proizvedenih z drugimi tehnologijami. Lahko so proizvedeni iz delov/profilov različnih oblik, ploskih izdelkov (plošč, ponjav, trakov), palic, ulitkov, kovnih izdelkov, narejenih iz jeklenih ali aluminijevih materialov, ki niso ali so zaščiteni pred rjo s premazom ali drugo obdelavo površine, npr. aluminij, zaščiten z anodno oksidacijo. Ta evropski standard zajema konstrukcijske hladno oblikovane člene in pločevino, kot je opredeljeno v 1993-1-3 in EN 1999-1-4. Ta evropski standard ne zajema ugotavljanja skladnosti sestavnih delov za obešene strope, tračnice ali železniške prage v železniških sistemih.

General Information

Status
Published
Publication Date
18-Jan-2012
Technical Committee
Current Stage
6100 - Translation of adopted SIST standards (Adopted Project)
Start Date
24-Jan-2012
Due Date
22-Jan-2013
Completion Date
08-May-2012

Relations

Buy Standard

Standard
EN 1090-1:2009+A1:2012
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard – translation
EN 1090-1:2009+A1:2012
Slovenian language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Izvedba jeklenih in aluminijastih konstrukcij - 1. del: Zahteve za ugotavljanje skladnosti sestavnih delov konstrukcijAusführung von Stahltragwerken und Aluminiumtragwerken - Teil 1: Konformitätsnachweisverfahren für tragende BauteileExécution des structures en acier et des structures en aluminium — Partie 1: Exigences pour l'évaluation de la conformité des éléments structurauxExecution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components91.080.10Kovinske konstrukcijeMetal structuresICS:Ta slovenski standard je istoveten z:EN 1090-1:2009+A1:2011SIST EN 1090-1:2009+A1:2012en,fr,de01-februar-2012SIST EN 1090-1:2009+A1:2012SLOVENSKI
STANDARD



SIST EN 1090-1:2009+A1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1090-1:2009+A1
November 2011 ICS 91.080.10 Supersedes EN 1090-1:2009English Version
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
Exécution des structures en acier et des structures en aluminium - Partie 1: Exigences pour l'évaluation de la conformité des éléments structuraux
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 1: Konformitätsnachweisverfahren für tragende Bauteile This European Standard was approved by CEN on 15 June 2008 and includes Corrigendum 1 issued by CEN on 17 November 2010 and Amendment 1 approved by CEN on 3 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1090-1:2009+A1:2011: ESIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011 (E) 2 Contents Page Foreword .4Introduction .51Scope .62Normative references .63Terms, definitions and abbreviations .73.1Terms and definitions .73.2Abbreviations .84Requirements .94.1Constituent products .94.1.1General .94.1.2Constituent products for steel components .94.1.3Constituent products for aluminium components .94.2Tolerances on dimensions and shape .94.3Weldability .94.4Fracture toughness . 104.5Structural characteristics . 104.5.1General . 104.5.2Load bearing capacity . 104.5.3Fatigue strength . 104.5.4Resistance to fire . 104.5.5Deformation at serviceability limit state . 114.6Reaction to fire . 114.7Dangerous substances . 114.8Impact resistance. 114.9Durability . 115Evaluation methods . 125.1General . 125.2Constituent products . 125.3Tolerances on dimensions and shape . 125.4Weldability . 125.5Fracture toughness . 125.6Structural characteristics . 135.6.1General . 135.6.2Structural design . 135.6.3Manufacturing characteristics . 145.7Resistance to fire . 145.8Reaction to fire . 145.9Dangerous substances . 145.10Impact resistance. 145.11Durability . 146Evaluation of conformity . 156.1General . 156.2Initial type testing . 156.2.1General . 156.2.2Characteristics . 166.2.3Use of historical data . 166.2.4Use of structural calculations for conformity assessment . 166.2.5Initial type calculation . 166.2.6Sampling, evaluation and conformity criteria . 166.2.7Declaration of performance characteristics . 16SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011(E) 3 6.2.8Recording of results from evaluations . 176.2.9Corrective actions . 176.3Factory production control. 196.3.1General . 196.3.2Personnel . 196.3.3Equipment . 196.3.4Structural design process . 196.3.5Constituent products used in manufacture . 206.3.6Component specification. 206.3.7Product evaluation . 206.3.8Non-conforming products . 207Classification and designation . 218Marking . 22Annex A (informative)
Guidelines for preparation of the component specification . 23A.1General . 23A.2Purchaser provided component specification (PPCS) . 23A.3Manufacturer provided component specification (MPCS) . 23Annex B (normative)
Assessment of factory production control . 25B.1General . 25B.2Initial inspection . 25B.3Continuous surveillance . 26B.4Frequency of inspection . 27B.4.1General . 27B.4.2Surveillance intervals . 27B.4.3Declaration by manufacturer . 28B.4.4Action in case of non-compliance . 28B.5Reports . 28Annex ZA (informative)
Clauses of this European Standard Addressing the provisions of EU Construction Products Directive (CPD) . 29ZA.1Scope and relevant characteristics . 29ZA.2Procedures for the attestation of conformity of structural steel and aluminium components . 31ZA.2.1System of attestation of conformity . 31ZA.2.2Assignment of tasks . 31ZA.2.3Declaration of conformity . 32ZA.3CE marking and labelling. 33ZA.3.1General . 33ZA.3.2Declaration of product properties by material properties and geometrical data . 33ZA.3.3Declaration of the strength value(s) of the component . 37ZA.3.4Declaration of compliance with a given component specification . 39ZA.3.5Declaration of the strength value(s) of the component from purchaser`s order . 41Bibliography . 43 SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011 (E) 4 Foreword This document (EN 1090-1:2009+A1:2011) has been prepared by Technical Committee CEN/TC 135 “Execution of steel and aluminium structures”, the secretariat of which is held by SN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. This document includes Corrigendum 11 issued by CEN on 2010-11-17 and Amendment 1, approved by CEN on 2011-10-03. This document supersedes EN 1090-1:2009. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 This corrigendum has been superseded by the changes of EN 1090-1:2009/FprA1:2011. SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011(E) 5 Introduction This harmonised European Standard is a part of a group of European standards dealing with design and manufacturing of load bearing components and structures made of steel or aluminium. This harmonised European Standard deals with provisions for conformity assessment of components which imply conformity to performance characteristics declared by the manufacturer of the components. The components have structural characteristics which make them fit for their particular use and function. The structural characteristics are governed by the design and the manufacture of the components. This harmonised European Standard does not contain rules for structural design and manufacture. Such rules are called up from the relevant parts of Eurocode for design requirements and from EN 1090-2 (steel) and EN 1090-3 (aluminium) for execution requirements. To use this harmonised European Standard for assessment and declaration of conformity of structural steel or aluminium components all relevant design and execution standards within the group need to be available. This harmonised European Standard has been prepared to satisfy Mandate M 120 – Structural metallic products and ancillaries (2/4) – issued by the European Commission. SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011 (E) 6
1 Scope This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics. This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures. The components can be used directly or in construction works or as structural components in the form of kits. This European Standard applies to series and non-series structural components including kits. The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e.g. anodising of aluminium. This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4. This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems. NOTE For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1090-2
Execution of steel structures and aluminium structures — Part 2: Technical requirements for steel structures
EN 1090-3
Execution of steel structures and aluminium structures — Part 3: Technical requirements for aluminium structures EN 1990:2002
Eurocode: Basis of structural design EN 1991 (all parts) Eurocode 1: Actions on structures
EN 1993 (all parts) Eurocode 3: Design of steel structures EN 1994 (all parts) Eurocode 4: Design of composite steel and concrete structures EN 1998 (all parts) Eurocode 8: Design of structures for earthquake resistance EN 1999 (all parts) Eurocode 9: Design of aluminium structures EN 10045-1
Metallic materials — Charpy impact test — Part 1: Test method SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011(E) 7 EN 10164 Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions EN 13501-1 Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests EN 13501-2
Fire classification of construction products and building elements — Part 2: Classification using data from fire resistance tests, excluding ventilation services EN ISO 9001 Quality management systems — Requirements (ISO 9001:2000) EN ISO 14731 Welding coordination — Tasks and responsibilities (ISO 14731:2006) ISO 7976-1
Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments ISO 7976-2
Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points ISO 17123-1 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 component specification document or documents giving all necessary information and technical requirements for manufacturing the structural component 3.1.2 constituent products materials or products used in manufacturing with properties which enter into structural calculations or otherwise relate to the mechanical resistance and stability of works and parts thereof, and/or their fire resistance, including aspects of durability and serviceability 3.1.3 design brief documents containing all information necessary to perform a structural design of the component, considering its intended use 3.1.4 European technical specifications European Standards and European Technical Approvals for construction products 3.1.5 evaluation method means to check that the performance characteristics of the component comply with the values to be declared and any other required values which are used for evaluation of conformity for characteristics such as material properties, geometry and structural characteristics NOTE 1 Where physical tests are carried out as the basis for the evaluation, the term test method is used. NOTE 2 Where structural calculations are used to evaluate the load bearing capacity and/or the fatigue strength, the term initial type calculation (ITC) is used. SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011 (E) 8 3.1.6 load bearing capacity value or set of values for the loads that can be carried by the component referring respectively to either a single type and direction of loading or to a set of loads in various directions and referring to a defined level of resistance in accordance with EN 1990 and the relevant parts of EN 1993, EN 1994 or EN 1999. For kits the load bearing capacity refers to loads and load combinations the kit can carry that are relevant to the structure for its intended purpose. NOTE The term load bearing capacity in this European Standard refers to situations for which the loads are predominantly static such that the influence of repetitive loads with a potential for fatigue need not be considered. The criteria for where fatigue needs to be considered are given in EN 1993 for steel components and in EN 1999 for aluminium components. 3.1.7 manufacturing those work operations required to produce the component, which may encompass fabrication, welding, mechanical fastenings, assembly, testing and documentation of the performance characteristics declared 3.1.8 structural characteristics properties of the component connected with its ability to function satisfactorily under the influence of the actions it is subject to
NOTE In this European Standard the performance characteristics, load bearing capacity, fatigue strength and resistance to fire are defined as structural characteristics together with the manufacturing characteristics that influence the structural behaviour of the component. Manufacturing characteristics are e.g. the execution classes, the welding quality, the geometrical accuracy (tolerances) or the surface properties, i.e. all properties that have influence on the structural behaviour. 3.1.9 structural components components to be used as load-bearing parts of works designed to provide mechanical resistance and stability to the works and/or fire resistance, including aspects of durability and serviceability which can be used directly as delivered or can be incorporated into a construction work 3.1.10 structural kit set of structural components to be assembled and installed on site
NOTE The assembled system of the structural components is a “structure”. 3.1.11 weldability quality of a steel or aluminium material for which a qualified welding procedure can be developed NOTE See EN ISO 15607. 3.2 Abbreviations The following abbreviations are used in this European Standard: FPC factory production control ITC initial type calculation ITT initial type testing MPCS manufacturer provided component specification NDP nationally determined parameter, a term used in the Eurocodes where a national provision is allowed SIST EN 1090-1:2009+A1:2012



EN 1090-1:2009+A1:2011(E) 9 NPD no performance determined, a term used if the actual characteristic has not been tested NOTE This can be the case if e.g. the actual characteristic is not regulated in the member state where the component is to be used. PPCS purchaser provided component specification R, E, I M performance characteristics related to testing of fire resistance in accordance with EN 13501-2 with the following meaning for the individual characteristics: R
fire resistance in minutes under a given set of actions on the component E
integrity (maintaining the integrity as a separating element) I
insulation (ability as a separating element to keep the temperature increase on the none fire exposed side below a set limit) M
mechanical action (resistance to withstand dynamic impact by testing – after completed fire heating) 4 Requirements 4.1 Constituent products 4.1.1 General Structural components of steel and aluminium shall be made of constituent products as given in 4.1.2 and 4.1.3, respectively. 4.1.2 Constituent products for steel components Constituent products for steel components shall be in accordance with the European Standards referred to in the relevant Clauses of EN 1090-2. NOTE The standards referred to in EN 1090-2 give information about the strength properties, weldability and fracture toughness of the steels. 4.1.3 Constituent products for aluminium components Constituent products for aluminium components shall be in accordance with the European Standards referred to in the relevant Clauses of EN 1090-3. NOTE The standards referred to in EN 1090-3 give information about the strength properties of the aluminium alloys. 4.2 Tolerances on dimensions and shape The geometrical tolerances specified in EN 1090-2 and EN 1090-3 for the essential tolerances shall apply to all components. If any special tolerances apply these shall be stated in the component specification. NOTE According to EN 1090-2 and EN 1090-3 the requirements for functional tolerances apply to all components. 4.3 Weldability If steel and aluminium structural components are to be declared as weldable they shall be made of weldable constituent products according to EN 1090-2 or EN 1999-1-1 as appropriate. If relevant to the performance of a steel product the through-thickness properties shall be declared. SIST EN 1090-1:2009+A1:2012



EN 1090
...

SLOVENSKI SIST EN 1090-1:2009+A1


STANDARD februar 2012















Izvedba jeklenih in aluminijastih konstrukcij –
1. del: Zahteve za ugotavljanje skladnosti sestavnih delov konstrukcij

Execution of steel structures and aluminium structures –
Part 1: Requirements for conformity assessment of structural components

Exécution des structures en acier et des structures en aluminium –
Partie 1: Exigences pour ľ évalution de la conformité des éléments structuraux

Ausführung von Stahltragwerken und Aluminiumtragwerken –
Teil 1: Konformitätsnachweisverfahren für tragende Bauteile














Referenčna oznaka
ICS 91.080.10 SIST EN 1090-1:2009+A1:2012 (sl)


Nadaljevanje na straneh II in III ter od 1 do 39




© 2012-06. Slovenski inštitut za standardizacijo Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1090-1:2009+A1 : 2012
NACIONALNI UVOD
Standard SIST EN 1090-1:2009+A1 (sl), Izvedba jeklenih in aluminijastih konstrukcij – 1. del: Zahteve
za ugotavljanje skladnosti sestavnih delov konstrukcij, 2012, ima status slovenskega standarda in je
enakovreden evropskemu standardu EN 1090-1:2009+A1 (en), Execution of steel structures and
aluminium structures – Part 1: Requirements for conformity assessment of structural components,
2011.
NACIONALNI PREDGOVOR
Evropski standard EN 1090-1:2009+A1:2011 je pripravil tehnični odbor Evropskega komiteja za
standardizacijo CEN/TC 135 Izvedba jeklenih konstrukcij, katerega tajništvo vodi SN.
Slovenski standard SIST EN 1090-1:2009+A1:2012 je prevod evropskega standarda EN 1090-
1:2009+A1:2011. V primeru spora glede besedila slovenskega prevoda v tem standardu je odločilen
izvirni evropski standard v angleškem jeziku. Slovensko izdajo standarda je pripravil tehnični odbor
SIST/TC KON Konstrukcije.
Odločitev za izdajo tega standarda je dne 15. decembra 2011 sprejel SIST/TC KON Konstrukcije.
ZVEZA S STANDARDI
S privzemom tega evropskega standarda veljajo za omenjeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku, razen tistih, ki so že sprejeti v nacionalno standardizacijo:
SIST EN 1090-2 Izvedba jeklenih in aluminijastih konstrukcij – 2. del: Tehnične zahteve za
izvedbo jeklenih konstrukcij
SIST EN 1090-3 Izvedba jeklenih in aluminijastih konstrukcij – 3. del: Tehnične zahteve za
aluminijaste konstrukcije.
SIST EN 1990:2004 Evrocode – Osnove projektiranja
SIST EN 1991 (vsi deli) Evrokod 1: Vplivi na konstrukcije
SIST EN 1993 (vsi deli) Evrokod 3: Projektiranje jeklenih konstrukcij
SIST EN 1994 (vsi deli) Evrokod 4: Projektiranje sovprežnih konstrukcij iz jekla in betona
SIST EN 1998 (vsi deli) Evrokod 8: Projektiranje potresnoodpornih konstrukcij
SIST EN 1999 (vsi deli) Evrokod 9: Projektiranje konstrukcij iz aluminijevih zlitin
SIST EN 10045-1 Kovinski materiali – Udarni preskus žilavosti po Charpyju – 1. del: Preskusna
metoda (Nadomeščen s SIST EN ISO 148-1:2010 (ISO 148-1:2009))
SIST EN 10164 Jekleni izdelki z izboljšanimi deformacijskimi lastnostmi, pravokotno na
površino izdelka – Tehnični dobavni pogoji
SIST EN 13501-1 Požarna klasifikacija gradbenih proizvodov in elementov stavb – 1. del:
Klasifikacija po podatkih iz preskusov odziva na ogenj
SIST EN 13501-2 Požarna klasifikacija gradbenih proizvodov in elementov stavb – 2. del:
Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti, razen za
prezračevalne naprave
SIST EN ISO 9001 Sistemi vodenja kakovosti – Zahteve (ISO 9001:2008)
SIST EN ISO 14731 Koordinacija varilnih del – Naloge in odgovornosti (ISO 14731:2006)
II

---------------------- Page: 2 ----------------------

SIST EN 1090-1:2009+A1 : 2012
OPOMBE
– Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v SIST EN 1090-
1:2009+A1:2012 to pomeni “slovenski standard”.
– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
– Ta nacionalni dokument je enakovreden EN 1090-1:2009+A1:2011 in je objavljen z dovoljenjem

CEN
Rue de Stassart 36
1050 Bruselj
Belgija
This national document is identical with EN 1090-1:2009+A1:2011 and is published with the
permission of

CEN
Rue de Stassart, 36
1050 Bruxelles
Belgium
III

---------------------- Page: 3 ----------------------

SIST EN 1090-1:2009+A1 : 2012

















〈prazna stran〉

IV

---------------------- Page: 4 ----------------------

EVROPSKI STANDARD EN 1090-1:2009+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM november 2011


ICS 91.080.10 Nadomešča EN 1090-1:2009



Slovenska izdaja

Izvedba jeklenih in aluminijastih konstrukcij – 1. del: Zahteve za ugotavljanje
skladnosti sestavnih delov konstrukcij

Execution of steel structures and Exécution des structures en acier Ausführung von Stahltragwerken und
aluminium structures – Part 1: et des structures en aluminium – Aluminiumtragwerken – Teil 1:
Requirements for conformity Partie 1: Exigences pour ľ Konformitätsnachweisverfahren für tragende
assessment of structural évalution de la conformité des Bauteile
components éléments structuraux




Ta evropski standard je CEN sprejel dne 15. junija 2008 in vključuje Popravek 1, ki ga je CEN sprejel
17. novembra 2010, in Dopolnilo 1, ki ga je CEN sprejel 3. oktobra 2011.
Člani CEN morajo izpolnjevati določila poslovnika CEN/CENELEC, s katerim je predpisano, da mora
biti ta standard brez kakršnih koli sprememb sprejet kot nacionalni standard. Najnovejši seznami teh
nacionalnih standardov z njihovimi bibliografskimi podatki se na zahtevo lahko dobijo pri Upravnem
centru CEN-CENELEC ali katerem koli članu CEN.
Ta evropski standard obstaja v treh izvirnih izdajah (angleški, francoski in nemški). Izdaje v drugih
jezikih, ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri Upravnem centru
CEN-CENELEC, veljajo kot uradne izdaje.
Člani CEN so nacionalni organ za standarde Avstrije, Belgije, Bolgarije, Cipra, Češke republike,
Danske, Estonije, Finske, Francije, Grčije, Hrvaške, Irske, Islandije, Italije, Latvije, Litve,
Luksemburga, Madžarske, Malte, Nemčije, Nizozemske, Norveške, Poljske, Portugalske, Romunije,
Slovaške, Slovenije, Španije, Švedske, Švice in Združenega kraljestva.





CEN
Evropski komite za standardizacijo
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung

Upravni center: Avenue Marnix 17, B-1000 Bruselj

© 2011 CEN. Lastnice avtorskih pravic so vse države članice CEN. Ref. oznaka EN 1090-1:2009+A1:2011 E

---------------------- Page: 5 ----------------------

SIST EN 1090-1:2009+A1 : 2012
VSEBINA Stran
Predgovor .5
Uvod .6
1 Področje uporabe .7
2 Zveze s standardi .7
3 Izrazi, definicije in kratice.8
3.1 Izrazi in definicije .8
3.2 Kratice .9
4 Zahteve.10
4.1 Sestavni proizvodi .10
4.1.1 Splošno.10
4.1.2 Sestavni proizvodi jeklenih sestavnih delov .10
4.1.3 Sestavni proizvodi aluminijastih sestavnih delov .10
4.2 Tolerance dimenzij in oblike .10
4.3 Varivost.10
4.4 Lomna žilavost.10
4.5 Konstrukcijske lastnosti .10
4.5.1 Splošno.10
4.5.2 Nosilnost.11
4.5.3 Odpornost proti utrujanju.11
4.5.4 Požarna odpornost .11
4.5.5 Deformacije pri mejnem stanju uporabnosti.11
4.6 Odziv na ogenj.11
4.7 Nevarne snovi.12
4.8 Udarna žilavost.12
4.9 Trajnost.12
5 Metode vrednotenja.12
5.1 Splošno.12
5.2 Sestavni proizvodi .12
5.3 Tolerance dimenzij in oblike .12
5.4 Varivost.12
5.5 Lomna žilavost.12
5.6 Konstrukcijske lastnosti .12
5.6.1 Splošno.12
5.6.2 Projektiranje.12
5.6.3 Proizvodne lastnosti .14
5.7 Požarna odpornost .14
5.8 Odziv na ogenj.14
5.9 Nevarne snovi.14
5.10 Udarna žilavost.14
2

---------------------- Page: 6 ----------------------

SIST EN 1090-1:2009+A1 : 2012
5.11 Trajnost.15
6 Vrednotenje skladnosti .15
6.1 Splošno.15
6.2 Začetno tipsko preskušanje.15
6.2.1 Splošno.15
6.2.2 Lastnosti .16
6.2.3 Uporaba predhodnih podatkov.16
6.2.4 Uporaba izračunov konstrukcij za ugotavljanje skladnosti.16
6.2.5 Začetni tipski izračun.16
6.2.6 Vzorčenje, vrednotenje in merila skladnosti.16
6.2.7 Izjava o tehničnih lastnostih .16
6.2.8 Dokumentiranje rezultatov vrednotenja.17
6.2.9 Korektivni ukrepi.17
6.3 Kontrola proizvodnje v obratu.18
6.3.1 Splošno.18
6.3.2 Osebje .18
6.3.3 Oprema.18
6.3.4 Postopek projektiranja konstrukcij.19
6.3.5 Sestavni proizvodi, uporabljeni pri izdelavi .19
6.3.6 Specifikacija sestavnega dela .19
6.3.7 Ocenjevanje proizvoda.19
6.3.8 Neskladni proizvodi .19
7 Klasifikacija in poimenovanje .20
8 Označevanje.20
Dodatek A (informativni): Smernice za pripravo specifikacij sestavnih delov .21
A.1 Splošno .21
A.2 Specifikacija sestavnega dela, ki jo določi kupec (PPCS).21
A.3 Specifikacija sestavnega dela, ki jo določi proizvajalec (MPCS).21
Dodatek B (normativni): Ocenjevanje kontrole proizvodnje v obratu .23
B.1 Splošno .23
B.2 Začetni pregled .23
B.3 Redni nadzor.24
B.4 Pogostost pregledov .24
B.4.1 Splošno .24
B.4.2 Intervali med nadzori.24
B.4.3 Izjava proizvajalca.24
B.4.4 Ukrepi v primeru neskladnosti.24
B.5 Poročila .25
Dodatek ZA (informativni) Točke tega evropskega standarda, ki se nanašajo na določila
Direktive EU o gradbenih proizvodih (CPD).26
ZA.1 Področje uporabe in ustrezne lastnosti.26
3

---------------------- Page: 7 ----------------------

SIST EN 1090-1:2009+A1 : 2012
ZA.2 Postopki potrjevanja skladnosti jeklenih in aluminijastih sestavnih delov konstrukcij .28
ZA.2.1 Sistemi potrjevanja skladnosti .28
ZA.2.2 Dodelitev nalog .28
ZA.2.3 Izjava o skladnosti.29
ZA.3 CE-označevanje in etiketiranje .30
ZA.3.1 Splošno .30
ZA.3.2 Izjava o lastnostih proizvoda na podlagi materialnih lastnosti in geometrijskih podatkov.30
ZA.3.3 Izjava o odpornosti/nosilnosti sestavnega dela .33
ZA.3.4 Izjava o skladnosti z dano specifikacijo sestavnega dela.34
ZA.3.5 Izjava o odpornosti/nosilnosti sestavnega dela na podlagi naročila kupca .37
Literatura.39
4

---------------------- Page: 8 ----------------------

SIST EN 1090-1:2009+A1 : 2012
Predgovor
Ta dokument (EN 1090-1:2009+A1:2011) je pripravil tehnični odbor CEN/TC 135 Izvedba jeklenih in
aluminijastih konstrukcij, katerega sekretariat vodi SN.
Ta evropski standard mora postati nacionalni standard z objavo istovetnega besedila ali z uradno
razglasitvijo najpozneje do maja 2012, nacionalni standardi, ki so z njim v nasprotju, pa morajo biti
umaknjeni najpozneje maja 2012.
1
Ta dokument vključuje Popravek 1 , ki ga je CEN izdal 17. novembra 2010, in Dopolnilo 1, ki ga je
CEN sprejel 3. oktobra 2011.
Ta dokument nadomešča EN 1090-1:2009.
Začetek in konec besedila, ki je dodano z dopolnilom ali je z njim spremenjeno, sta označena z 1 1 .

Opozoriti velja, da so nekateri elementi tega dokumenta lahko predmet patentnih pravic. CEN [in/ali
CENELEC] ni odgovoren za ugotavljanje katere koli ali vseh takšnih patentnih pravic.
Ta dokument je bil pripravljen v okviru mandata, ki sta ga Evropska komisija in Evropsko združenje za
prosto trgovino podelila CEN, in podpira bistvene zahteve direktiv(-e) EU.
Za povezavo z direktivo(-ami) EU glej informativni dodatek ZA, ki je sestavni del tega standarda.
Po določilih notranjih predpisov CEN/CENELEC so ta evropski standard dolžne uvesti nacionalne
organizacije za standardizacijo naslednjih držav: Avstrije, Belgije, Bolgarije, Cipra, Češke republike,
Danske, Estonije, Finske, Francije, Grčije, Hrvaške, Irske, Islandije, Italije, Latvije, Litve,
Luksemburga, Madžarske, Malte, Nemčije, Nizozemske, Norveške, Poljske, Portugalske, Romunije,
Slovaške, Slovenije, Španije, Švedske, Švice in Združenega kraljestva.



1
Ta popravek bo nadomeščen s spremembami EN 1090-1:2009/FprA1:2011.
5

---------------------- Page: 9 ----------------------

SIST EN 1090-1:2009+A1 : 2012
Uvod
Ta harmonizirani evropski standard je del skupine evropskih standardov, ki obravnavajo projektiranje
in proizvodnjo nosilnih sestavnih delov in konstrukcij, izdelanih iz jekla ali aluminija.
Ta harmonizirani evropski standard obravnava določila za ugotavljanje skladnosti sestavnih delov, ki
obsega skladnost s tehničnimi lastnostmi, kot jih navede proizvajalec sestavnih delov.
Sestavni deli imajo konstrukcijske lastnosti, zaradi katerih so primerni za določeno uporabo in namen.
Konstrukcijske lastnosti so odvisne od projektiranja in izdelave sestavnih delov.
Ta harmonizirani evropski standard ne vsebuje pravil za projektiranje in izdelavo konstrukcij. Ta
pravila so navedena v ustreznih delih evrokodov za projektiranje ter v EN 1090-2 (jeklo) in EN 1090-3
(aluminij) za izvedbo.
Za uporabo tega harmoniziranega evropskega standarda za ugotavljanje in izjavo o skladnosti jeklenih
ali aluminijastih sestavnih delov morajo biti na voljo vsi potrebni standardi, ki obravnavajo projektiranje
in izdelavo.
Ta harmonizirani evropski standard je bil pripravljen na podlagi mandata M120 – Konstrukcijski
kovinski proizvodi in pomožni proizvodi (2/4) – ki ga je podelila Evropska komisija.
6

---------------------- Page: 10 ----------------------

SIST EN 1090-1:2009+A1 : 2012
1 Področje uporabe
Ta evropski standard določa zahteve za ugotavljanje skladnosti tehničnih lastnosti jeklenih in
aluminijastih sestavnih delov ter sklopov, ki so dani na trg kot gradbeni proizvodi. Ugotavljanje
skladnosti se nanaša na lastnosti izdelave, in kjer je to primerno, na konstrukcijske lastnosti.
Ta evropski standard obravnava tudi ugotavljanje skladnosti jeklenih sestavnih delov za uporabo v
sovprežnih konstrukcijah iz jekla in betona.
Sestavni deli se lahko uporabijo samostojno ali v gradbenih objektih ali pa kot sestavni deli sklopa.
Ta evropski standard se nanaša na serijske in neserijske sestavne dele konstrukcij, vključno s sklopi.
Sestavni deli so lahko izdelani iz vroče valjanih ali hladno oblikovanih sestavnih proizvodov ali
sestavnih proizvodov, izdelanih z drugačno tehnologijo. Izdelani so lahko iz prečnih prerezov/profilov
različnih oblik, ploščatih proizvodov (pločevin, tankih pločevin, trakov), palic, ulitkov, odkovkov iz jekla
ali aluminija, lahko so protikorozijsko zaščiteni s premazi ali drugimi površinskimi zaščitnimi sredstvi,
npr. z eloksiranjem (anodiziranjem) aluminija, ali pa niso zaščiteni proti koroziji.
Ta evropski standard obravnava hladno oblikovane konstrukcijske elemente in pločevine, kot je
določeno v EN 1993-1-3 in EN 1999-1-4.
Ta evropski standard ne obravnava ugotavljanja skladnosti sestavnih delov spuščenih stropov, tirnic
ali pragov za uporabo v železniških sistemih.
OPOMBA: Za nekatere jeklene ali aluminijaste sestavne dele so bile pripravljene podrobne specifikacije za tehnične in
druge zahteve. Te specifikacije se lahko izdajo kot EN ali kot točke znotraj EN. Na primer, EN 13084-7
obravnava jeklene dimnike z enojnim zidom in jeklenimi oblogami. Take podrobne specifikacije bodo imele
prednost v primeru neskladnosti z zahtevami tega evropskega standarda.
2 Zveze s standardi
Za uporabo tega standarda so nujno potrebni spodaj navedeni dokumenti. Pri datiranih dokumentih
velja samo navedena izdaja. Pri nedatiranih dokumentih velja najnovejša izdaja dokumenta (vključno z
morebitnimi spremembami).
EN 1090-2 Izvedba jeklenih in aluminijastih konstrukcij – 2. del: Tehnične zahteve za
izvedbo jeklenih konstrukcij
EN 1090-3 Izvedba jeklenih in aluminijastih konstrukcij – 3. del: Tehnične zahteve za
aluminijaste konstrukcije.
EN 1990:2002 Evrocode – Osnove projektiranja
EN 1991 (vsi deli) Evrokod 1: Vplivi na konstrukcije
EN 1993 (vsi deli) Evrokod 3: Projektiranje jeklenih konstrukcij
EN 1994 (vsi deli) Evrokod 4: Projektiranje sovprežnih konstrukcij iz jekla in betona
EN 1998 (vsi deli) Evrokod 8: Projektiranje potresnoodpornih konstrukcij
EN 1999 (vsi deli) Evrokod 9: Projektiranje konstrukcij iz aluminijevih zlitin
EN 10045-1 Kovinski materiali – Udarni preskus žilavosti po Charpyju – 1. del: Preskusna
metoda
EN 10164 Jekleni izdelki z izboljšanimi deformacijskimi lastnostmi, pravokotno na
površino izdelka – Tehnični dobavni pogoji
EN 13501-1 Požarna klasifikacija gradbenih proizvodov in elementov stavb – 1. del:
Klasifikacija po podatkih iz preskusov odziva na ogenj
EN 13501-2 Požarna klasifikacija gradbenih proizvodov in elementov stavb – 2. del:
Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti, razen za
prezračevalne naprave
7

---------------------- Page: 11 ----------------------

SIST EN 1090-1:2009+A1 : 2012
EN ISO 9001 Sistemi vodenja kakovosti – Zahteve (ISO 9001:2008)
EN ISO 14731 Koordinacija varilnih del – Naloge in odgovornosti (ISO 14731:2006)
ISO 7976-1 Tolerance za stavbe: Merilne metode stavb in stavbnih izdelkov – 1. del:
Metode in naprave
ISO 7976-2 Tolerance za stavbe: Merilne metode stavb in stavbnih izdelkov – 2. del:
Pozicije merilnih točk
ISO 17123-1 Optika in optične naprave – Terenski postopki za preskušanje geodetskih
instrumentov – 1. del: Teorija
3 Izrazi, definicije in kratice
3.1 Izrazi in definicije
V tem evropskem standardu se uporabljajo naslednji izrazi in definicije.
3.1.1
specifikacija sestavnega dela
dokument ali dokumenti, ki podajajo vse potrebne podatke in tehnične zahteve za izdelavo
sestavnega dela konstrukcije
3.1.2
sestavni proizvodi
materiali ali proizvodi, uporabljeni pri izdelavi, katerih lastnosti se uporabljajo za izračun konstrukcij ali
so kakor koli drugače povezane z mehansko odpornostjo in stabilnostjo objektov ali delov objektov
in/ali z njihovo požarno odpornostjo, vključno z vidika trajnosti in uporabnosti
3.1.3
projektna dokumentacija
dokumenti, ki vsebujejo vse potrebne informacije za izvedbo projektiranja sestavnih delov konstrukcij
glede na njihovo predvideno uporabo

3.1.4
evropske tehnične specifikacije
evropski standardi in evropska tehnična soglasja za gradbene proizvode
3.1.5
metoda vrednotenja
načini, s katerimi se preveri skladnost tehničnih lastnosti sestavnega dela z navedenimi vrednostmi ali
kakršnimi koli drugimi zahtevanimi vrednostmi, ki se uporabljajo za vrednotenje skladnosti lastnosti,
kot so materialne, geometrijske in konstrukcijske lastnosti
OPOMBA 1: Kadar podlago za vrednotenje predstavljajo fizikalni preskusi, je uporabljen izraz preskusna metoda.
OPOMBA 2: Kadar se za vrednotenje nosilnosti in/ali odpornosti proti utrujanju uporabijo izračuni konstrukcij, je uporabljen
izraz začetni tipski izračun (ITC).
3.1.6
nosilnost
vrednost ali niz vrednosti za obtežbo, ki jo sestavni del lahko prenese ob upoštevanju ene vrste in
smeri obtežbe ali niza obtežb v različnih smereh glede na določeno stopnjo odpornosti v skladu z EN
1990 in ustreznimi deli EN 1993, EN 1994 ali EN 1999. Za sklope se nosilnost nanaša na obtežbe in
obtežne kombinacije, ki jih sklop lahko prenese in ki ustrezajo predvideni uporabi
OPOMBA Izraz nosilnost se v tem evropskem standardu nanaša na primere, kjer je obtežba pretežno statična, tako da
vpliva ponavljajoče se obtežbe z možnostjo utrujanja ni treba upoštevati. Merila za upoštevanje utrujanja so
navedena v EN 1993 za jeklene sestavne dele in v EN 1999 za aluminijaste sestavne dele.
8

---------------------- Page: 12 ----------------------

SIST EN 1090-1:2009+A1 : 2012
3.1.7
izdelava
delovni postopki, potrebni za izdelavo sestavnih delov, ki lahko obsegajo izdelavo, varjenje, vezna
sredstva, montažo, preskušanje in dokumentiranje navedenih tehničnih lastnosti
3.1.8
konstrukcijske lastnosti
lastnosti sestavnega dela, povezane z zmožnostjo ustreznega delovanja pod učinkom vplivov, katerim
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.