iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60601-2-52:2010/A1:2015

(Amendment)

Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds

Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds

IEC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

Medizinische elektrische Geräte - Teil 2-52: Besondere Festlegungen für die Sicherheit einschließlich der wesentlichen Leistungsmerkmale von medizinischen Betten

Appareils électromédicaux - Partie 2-52: Exigences particulières pour la sécurité de base et les performances essentielles des lits médicaux

La CEI 60601-2-52:2009 s'applique à la sécurité de base et aux performances essentielles des lits medicaux destinés aux adultes. Cette première édition annule et remplace la première édition de la CEI 60601-2-38, parue en 1996, et son Amendement (1999). Elle constitue une révision technique. La CEI 60601-2-52:2009 est la réalisation d'un travail important d'alignement et d'ajustement de domaines d'application entre la CEI 60601-2-38, la EN 1970, et la troisième édition de la CEI 60601-1.

Medicinska električna oprema - 2-52. del: Posebne zahteve za osnovno varnost in bistvene lastnosti medicinskih postelj - Dopolnilo A1

General Information

Status
Published
Publication Date
13-Aug-2015
ICS
11.140 - Hospital equipment
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Jun-2015
Due Date
20-Aug-2015
Completion Date
14-Aug-2015
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/467 - Standardisation mandate addressed to CEN and CENELEC: modification and completion of EN 60601-2-52 to prevent entrapment of children and of adults with an atypical anatomy in medical beds and entrapment of children in medical cots
Ref Project
EN 60601-2-52:2010/A1:2015 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

Relations

Amends
SIST EN 60601-2-52:2010 - Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
Effective Date
01-Sep-2015
Amends
SIST EN 60601-2-52:2010 - Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
Effective Date
28-Jan-2023

Buy Standard

EN 60601-2-52:2010/A1:2015EN 60601-2-52:2010/A1:2015
PreviousNext
Amendment
EN 60601-2-52:2010/A1:2015
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60601-2-52:2010/A1:2015
01-september-2015
0HGLFLQVNDHOHNWULþQDRSUHPDGHO3RVHEQH]DKWHYH]DRVQRYQRYDUQRVWLQ
ELVWYHQHODVWQRVWLPHGLFLQVNLKSRVWHOM'RSROQLOR$
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and
essential performance of medical beds
Medizinische elektrische Geräte - Teil 2-52: Besondere Festlegungen für die Sicherheit
einschließlich der wesentlichen Leistungsmerkmale von medizinischen Betten
Appareils électromédicaux - Partie 2-52: Exigences particulières pour la sécurité de base
et les performances essentielles des lits médicaux
Ta slovenski standard je istoveten z: EN 60601-2-52:2010/A1:2015
ICS:
11.140 Oprema bolnišnic Hospital equipment
SIST EN 60601-2-52:2010/A1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60601-2-52:2010/A1:2015

---------------------- Page: 2 ----------------------

SIST EN 60601-2-52:2010/A1:2015


EUROPEAN STANDARD EN 60601-2-52:2010/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 11.140

English Version
Medical electrical equipment -
Part 2-52: Particular requirements for the basic safety and
essential performance of medical beds
(IEC 60601-2-52:2009/A1:2015)
Appareils électromédicaux -  Medizinische elektrische Geräte -
Partie 2-52: Exigences particulières de sécurité de base et Teil 2-52: Besondere Festlegungen für die Sicherheit
de performances essentielles des lits médicaux einschließlich der wesentlichen Leistungsmerkmale von
(IEC 60601-2-52:2009/A1:2015) medizinischen Betten
(IEC 60601-2-52:2009/A1:2015)
This amendment A1 modifies the European Standard EN 60601-2-52:2010; it was approved by CENELEC on 2015-04-22. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60601-2-52:2010/A1:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60601-2-52:2010/A1:2015
EN 60601-2-52:2010/A1:2015 - 2 -
Foreword
The text of document 62D/1186/FDIS, future IEC 60601-2-52:2009/A1, prepared by
SC 62D "Electromedical equipment" of IEC/TC 62 "Electrical equipment in medical practice" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60601-2-52:2010/A1:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-01-22
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-04-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive.

For the relationship with EU Directive see informative Annex ZZ, included in EN 60601-2-52:2010.

Endorsement notice
The text of the International Standard IEC 60601-2-52:2009/A1:2015 was approved by CENELEC as
a European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60601-2-52:2010/A1:2015



IEC 60601-2-52


Edition 1.0 2015-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




A MENDMENT 1

AM ENDEMENT 1





Medical electrical equipment –

Part 2-52: Particular requirements for the basic safety and essential performance

of medical beds




Appareils électromédicaux –

Partie 2-52: Exigences particulières de sécurité de base et de performances


essentielles des lits médicaux













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 11.140 ISBN 978-2-8322-2390-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

---------------------- Page: 5 ----------------------

SIST EN 60601-2-52:2010/A1:2015
– 2 – IEC 60601-2-52:2009/AMD1:2015
© IEC 2015
FOREWORD
This amendment has been prepared by subcommittee 62D: Electromedical equipment, of IEC
technical committee 62: Electrical equipment in medical practice.
The text of this amendment is based on the following documents:
FDIS Report on voting
62D/1186/FDIS 62D/1232/RVD

Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________

201.1.1 * Scope
Replace the existing te
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60601-2-35:2021(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 60601-2-35:2020)
EN IEC 60601-2-35:2021

EN-IEC 60601-2-35 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to pre warm a bed are included in the scope of this document. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to be applicable to a specifically defined typeof ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document,except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-46:2020(Main)
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables (IEC 60601-2-46:2016)
EN IEC 60601-2-46:2019

IEC 60601-2-46:2010 specifies safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the transportation of the table top to or from the base or pedestal of an operating table with detachable table top. This second edition cancels and replaces the first edition published in 1998 and constitutes a technical revision. This edition of IEC 60601-2-46 was revised to align structurally with the 2005 edition of IEC 60601-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50637:2018(Main)
Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
EN 50637:2017

This Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL BEDS, hereafter referred to as MEDICAL BEDS as defined in 201.3.218, intended for CHILDREN as defined in 201.3.207, and ADULTS with atypical anatomy (ADULTS ranging outside the definition for ADULTS in 201.3.201).
This standard applies to medical beds with nonadjustable and electrical / mechanical adjustable functions.
This Standard applies to MEDICAL BEDS with an internal length of up to 180 cm suitable to a body length of 155 cm.
NOTE 1   The limitation of 180 cm is in order to minimize the foreseeable misuse, of a parent sharing the bed with the child or that the bed will be used by an ADULT.
If a manufacturer wishes to make a bed that can be used by both a child and an ADULT, e.g. length of 180 cm or more, then it will fulfil both EN 60601-2-52 and this particular standard.
This Standard does not apply to MEDICAL BEDS intended for ADULTS as defined in 201.3.201 (covered by EN 60601-2-52).
This Standard does not apply to :
-   incubators covered by EN 60601-2-19 ;
-   beds for children, covered by EN 716-1 and EN 716-2 ;
-   cribs and cradles covered by EN 1130 (all parts) ;
-   bunk beds and high beds, covered by EN 747-1 and 747-2.
If a clause or subclause is specifically intended to be applicable to a MEDICAL BED only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to MEDICAL BEDS and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of MEDICAL BED or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of EN 60601-1:2006.
NOTE 2   See also 4.2 of EN 60601-1:2006.
NOTE 3   Body length is measured from crown to sole.
1.2 Object
The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements and test methods for MEDICAL BEDS as defined in 201.3.218 intended for CHILDREN as defined in 201.3.207.
(...)

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/A1:2017(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 80601-2-35:2009/A1:2016)
EN 80601-2-35:2009/A1:2016
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/AC:2015(Corrigendum)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
EN 80601-2-35:2009/AC:2015
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/A11:2012(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
EN 80601-2-35:2009/A11:2011

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-52:2010/AC:2011(Main)
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds
EN 60601-2-52:2010/AC:2011

EC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010(Main)
Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of blankets, pads and mattresses, intended for heating in medical use (IEC 80601-2-35:2009)
EN 80601-2-35:2009

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50447:2005(Main)
Active implantable medical devices - Particular requirements for Heart-Lung Machines (HLM)
prEN 50447

D127/107: Project under Benchemark 6 * Extension of target date approved until 2007-09-12 (no more extension allowed) * TC 62 decision on 2006-10-24: prEN 50447 deleted from work programme due to lack of sustained interest from stakeholders

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-35:2021/oprA1:2023(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use - Amendment 1
EN IEC 60601-2-35:2021/prA1:2022
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day