iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12756:2001

(Main)

Mechanical seals - Principal dimensions, designation and material codes

Mechanical seals - Principal dimensions, designation and material codes

This European Standard defines the principal dimensions for the internal installation of single and multiple mechanical seals with (rotating) spring units into the pump sealing cavity according to ISO 3069 as minimum cavity dimensions as typical for centrifugal pumps in accordance with EN 22858 and EN 733. It also gives the seal designations and material codes to be used.

Gleitringdichtungen - Hauptmaße, Bezeichnung und Werkstoffschlüssel

Diese Europäische Norm enthält die Hauptmaße für den Einbau von innenliegenden Einzel und Mehrfach-Gleitringdichtungen mit umlaufendem Federteilin den Wellendichtungsraum nach ISO 3069 als Mindest-Einbauraumabmessungen, wie diese typisch für Kreiselpumpen nach EN 22858 und EN 733 sind, und legt deren Bezeichnung und Werkstoffschlüssel fest.

Garnitures mécaniques d'étanchéité - Dimensions principales, désignation et codes matériaux

Cette norme européenne définit les dimensions principales de montage des garnitures mécaniques simples et doubles a bague élastique tournante dans des logements de pompes conformes a l'ISO 3069, de dimensions minimales caractéristiques pour pompes centrifuges du type indiqué dans les EN    22858 et EN 733. Elle donne également les désignations des garnitures d'étanchéité et les codes matériaux a utiliser.

Mechanical seals - Principal dimensions, designation and material codes

General Information

Status
Published
Publication Date
31-May-2001
ICS
21.140 - Seals, glands
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-2001
Due Date
01-Jun-2001
Completion Date
01-Jun-2001
Ref Project
EN 12756:2000 - Mechanical seals - Principal dimensions, designation and material codes

Buy Standard

EN 12756:2001EN 12756:2001
PreviousNext
Standard
EN 12756:2001
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mechanical seals - Principal dimensions, designation and material codesGleitringdichtungen - Hauptmaße, Bezeichnung und WerkstoffschlüsselGarnitures mécaniques d'étanchéité - Dimensions principales, désignation et codes matériauxMechanical seals - Principal dimensions, designation and material codes21.140T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 21049:2005(Main)
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN ISO 21049:2004

ISO 21049:2004 specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas and chemical industries. It is applicable mainly for hazardous, flammable and/or toxic services where a greater degree of reliability is required for the improvement of equipment availability and the reduction of both emissions to the atmosphere and life-cycle sealing costs. It covers seals for pump shaft diameters from 20 mm (0,75 in) to 110 mm (4,3 in).
ISO 21049:2004 is also applicable to seal spare parts and can be referred to for the upgrading of existing equipment. A classification system for the seal configurations covered by ISO 21049:2004 into categories, types, arrangements and orientations is provided.

  • Standard
    197 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16752:2015(Main)
Centrifugal pumps - Test procedure for seal packings
EN 16752:2015

This document gives details of a test procedure for packings to be used to seal the stuffing boxes of centrifugal pumps. It gives provisions on the design of test equipment, standard test parameters and reporting criteria. It does not specify performance criteria which should be agreed between supplier and customer, but does define 3 tightness classes.
When necessary, this document is also applicable to packings used on other rotary equipment such as mixers and agitators.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21049:2005(Main)
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN ISO 21049:2004

ISO 21049:2004 specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas and chemical industries. It is applicable mainly for hazardous, flammable and/or toxic services where a greater degree of reliability is required for the improvement of equipment availability and the reduction of both emissions to the atmosphere and life-cycle sealing costs. It covers seals for pump shaft diameters from 20 mm (0,75 in) to 110 mm (4,3 in).
ISO 21049:2004 is also applicable to seal spare parts and can be referred to for the upgrading of existing equipment. A classification system for the seal configurations covered by ISO 21049:2004 into categories, types, arrangements and orientations is provided.

  • Standard
    197 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12690:1999(Main)
Biotechnology - Performance criteria for shaft seals
EN 12690:1999

This European Standard specifies performance criteria for shaft seals in equipment used in biotechnological processes with respect to the potential risks of microorganisms in use for the worker or the environment.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9222-2:1998(Main)
Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989)
EN ISO 9222-2:1994

In contrast to the general simplified representation of part 1, this method shows more details of a seal, for example the configuration of lips. It should also be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. Elements and examples of this representation mode are given in tables and figures.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9222-1:1998(Main)
Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
EN ISO 9222-1:1995

This method indicates only essential features ans should be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. The degree of simplification depends on the kind of object represented, the scale of the drawing and the purpose of documentation. ISO 9222-2 deals with the detailed simplified representation.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 21049:2010(Main)
Pumps - Shaft-sealing systems for centrifugal and rotary pumps (ISO/DIS 21049:2010)
prEN ISO 21049

2018-06-15 Project abandoned as ISO abandoned the project.

  • Draft
    293 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day