Templates for lettering and symbols -- Part 3: Slot widths for technical pens with tubular tips in accordance with ISO 9175-1

Gabarits de dessin pour l'écriture et les symboles -- Partie 3: Largeurs de perforation pour plumes tubulaires à pointe tubulaire conforme à l'ISO 9175-1

La présente partie de l'ISO 9178 fixe pour les gabarits de dessin les largeurs de perforation assurant un guidage correct de la plume. Elle est applicable aux gabarits de dessin pour l'écriture et le dessin avec plume tubulaire à pointe tubulaire conforme à l'ISO 9175-1. La présente partie de l'ISO 9178 ne s'applique pas aux dessins techniques préparés à l'aide de traceurs.

Šablone za pisavo in simbole - 3. del: Širine rež za peresnike s cevasto konico v skladu z ISO 9175-1

General Information

Status
Withdrawn
Publication Date
31-May-1995
Withdrawal Date
30-Sep-2005
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2005
Due Date
01-Oct-2005
Completion Date
01-Oct-2005

Buy Standard

Standard
ISO 9178-3:1989 - Templates for lettering and symbols
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 9178-3:1995
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 9178-3:1989 - Gabarits de dessin pour l'écriture et les symboles
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 9178-3:1989 - Gabarits de dessin pour l'écriture et les symboles
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL IS0
9178-3
STANDARD
First edition
1989-02-15
Templates for lettering and symbols -
Part 3 :
Slot widths for technical pens with tubular tips
in accordance with IS0 9175-1
Gabarits de dessin pour l%criture et les symboles -
Partie 3 : Largeurs de perforation pour plumes tubulaires 2 pointe tubulaire
conforme 2 /‘/SO 9775- 7 .
Reference number
IS0 9178-3 : 1989 (E)

---------------------- Page: 1 ----------------------
IS0 9178-3 : 1989 (El
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
International organizations, govern-
the right to be represented on that committee.
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 9178-3 was prepared by Technical Committee ISO/TC 10,
Technical drawings.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organization for Standardization, 1989
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 9178-3 : 1989 (E)
Templates for lettering and symbols -
Part 3:
Slot widths for technical pens with tubular tips
in accordance with IS0 9175-1
IS0 3098, Technical drawings - Lettering -
0 Introduction
IS0 9178 has been drawn up to provide a universal means of
Part 7: Currently used characters.
communication between the various interests involved in
technical drawing.
Part 2: Greek characters.
Requirements in industry vary considerably; in recognition of
Fart 3: Diacritical and particular marks for the Latin
this fact, IS0 9178 comprises several parts:
alphabet.
Part 1 : General principles and identification markings.
Part 4: Cyrillic characters.
Part 2: Slot wid
...

SLOVENSKI STANDARD
SIST ISO 9178-3:1995
01-junij-1995
Šablone za pisavo in simbole - 3. del: Širine rež za peresnike s cevasto konico v
skladu z ISO 9175-1
Templates for lettering and symbols -- Part 3: Slot widths for technical pens with tubular
tips in accordance with ISO 9175-1
Gabarits de dessin pour l'écriture et les symboles -- Partie 3: Largeurs de perforation
pour plumes tubulaires à pointe tubulaire conforme à l'ISO 9175-1
Ta slovenski standard je istoveten z: ISO 9178-3:1989
ICS:
01.100.40 Risalna oprema Drawing equipment
SIST ISO 9178-3:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 9178-3:1995

---------------------- Page: 2 ----------------------

SIST ISO 9178-3:1995
INTERNATIONAL IS0
9178-3
STANDARD
First edition
1989-02-15
Templates for lettering and symbols -
Part 3 :
Slot widths for technical pens with tubular tips
in accordance with IS0 9175-1
Gabarits de dessin pour l%criture et les symboles -
Partie 3 : Largeurs de perforation pour plumes tubulaires 2 pointe tubulaire
conforme 2 /‘/SO 9775- 7 .
Reference number
IS0 9178-3 : 1989 (E)

---------------------- Page: 3 ----------------------

SIST ISO 9178-3:1995
IS0 9178-3 : 1989 (El
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
International organizations, govern-
the right to be represented on that committee.
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 9178-3 was prepared by Technical Committee ISO/TC 10,
Technical drawings.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organization for Standardization, 1989
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 9178-3:1995
INTERNATIONAL STANDARD IS0 9178-3 : 1989 (E)
Templates for lettering and symbols -
Part 3:
Slot widths for technical pens with tubular tips
in accordance with IS0 9175-1
IS0 3098, Technical drawings - Lettering -
0 Introduction
IS0 9178 has been drawn up to provide a universal me
...

NORME
ISO
INTERNATIONALE
9178-3
Première édition
1989-02-l 5
Gabarits de dessin pour l’écriture et les
symboles -
Partie 3 :
Largeurs de perforation pour plumes tubulaires
à pointe tubulaire conforme à I’ISO 9175-1
Templates for lettering and symbols -
Part 3 : Slot widths for technical pens with tubular tips
in accordance with /SO 9175- 1
Numéro de référence
ISO 9178-3 : 1989 (F)

---------------------- Page: 1 ----------------------
ISO 9178-3 : 1989 (FI
Avant-propos
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 9178-3 a été élaborée par le comité technique ISO/TC 10,
Dessins techniques.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
0
0 Organisation internationale de normalisation, 1989
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 9178-3 : 1989 (F)
Gabarits de dessin pour l’écriture et les symboles -
Partie 3:
Largeurs de perforation pour plumes tubulaires à pointe
tubulaire conforme à I’ISO 9175-I
0 Introduction ISO 3998, Dessins techniques - Écriture -
L’ISO 9178 a été élaborée pour servir de moyen universel de
Partie 7 : Caractères courants.
communication entre tous ceux qui s’intéressent de près ou de
loin au dessin technique.
Partie 2: Caractères grecs.
Les besoins de l’industrie variant considérablement d’une bran-
Partie 3: Signes diacritiques et signes particuliers à l’alpha-
che à l’autre, I’ISO 9178 a été présentée en plusieurs parties, à
bet latin.
savoir:
Partie 4: Caractères cyrilliques.
Partie 1 : Principes généraux et marquages d’identification.
Partie 2: Largeurs de perforation pour crayons à papier,
ISO 9175-1, Pointes tubulaires pour plumes tubulaires et instru-
porte-mine et crayons à mine fine.
ments de dessin à main à encre de Chine, utilisés sur papier cal-
- Partie 7: Définitions, dimensions, désignation et mar-
que
Partie 3: Largeurs de perforation pour plumes tubulaires à
quage.
pointe t
...

NORME
ISO
INTERNATIONALE
9178-3
Première édition
1989-02-l 5
Gabarits de dessin pour l’écriture et les
symboles -
Partie 3 :
Largeurs de perforation pour plumes tubulaires
à pointe tubulaire conforme à I’ISO 9175-1
Templates for lettering and symbols -
Part 3 : Slot widths for technical pens with tubular tips
in accordance with /SO 9175- 1
Numéro de référence
ISO 9178-3 : 1989 (F)

---------------------- Page: 1 ----------------------
ISO 9178-3 : 1989 (FI
Avant-propos
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 9178-3 a été élaborée par le comité technique ISO/TC 10,
Dessins techniques.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
0
0 Organisation internationale de normalisation, 1989
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 9178-3 : 1989 (F)
Gabarits de dessin pour l’écriture et les symboles -
Partie 3:
Largeurs de perforation pour plumes tubulaires à pointe
tubulaire conforme à I’ISO 9175-I
0 Introduction ISO 3998, Dessins techniques - Écriture -
L’ISO 9178 a été élaborée pour servir de moyen universel de
Partie 7 : Caractères courants.
communication entre tous ceux qui s’intéressent de près ou de
loin au dessin technique.
Partie 2: Caractères grecs.
Les besoins de l’industrie variant considérablement d’une bran-
Partie 3: Signes diacritiques et signes particuliers à l’alpha-
che à l’autre, I’ISO 9178 a été présentée en plusieurs parties, à
bet latin.
savoir:
Partie 4: Caractères cyrilliques.
Partie 1 : Principes généraux et marquages d’identification.
Partie 2: Largeurs de perforation pour crayons à papier,
ISO 9175-1, Pointes tubulaires pour plumes tubulaires et instru-
porte-mine et crayons à mine fine.
ments de dessin à main à encre de Chine, utilisés sur papier cal-
- Partie 7: Définitions, dimensions, désignation et mar-
que
Partie 3: Largeurs de perforation pour plumes tubulaires à
quage.
pointe t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.