SIST EN 474-9:2022
(Main)Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
This part of prEN 474 deals with all significant hazards, hazardous situations and events relevant to pipelayers as defined in EN ISO 6165:2006 when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1:2017.
This part does not repeat the requirements from prEN 474-1:2017 but adds or replaces the requirements for application for pipelayers.
This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of pipelayers.
This part specifies additional requirements for rear mounted winches.
Pipelayers with rotating upper structure are excluded from the scope of this document. This European Standard is not applicable to pipelayers manufactured before the date of publication of this European Standard by CEN.
Erdbaumaschinen - Sicherheit - Teil 9: Anforderungen für Rohrverleger
Dieses Dokument behandelt zusammen mit EN 474 1:2022 alle signifikanten Gefährdungen, Gefährdungssituationen und ‑ereignisse von Rohrverleger, wie sie in 3.1 definiert sind, wenn diese Maschinen bestimmungsgemäß verwendet werden sowie unter den vernünftigerweise vom Hersteller vorhersehbaren Fehlanwendungen (siehe Anhang A) für die gesamte Lebensdauer der Maschine wie in EN ISO 12100:2010, 5.4, beschrieben betrieben werden.
Die Anforderungen dieses Dokuments gelten ergänzend zu den allgemeinen Anforderungen in EN 474 1:2022. Dieses Dokument wiederholt nicht die Anforderungen aus EN 474 1:2022, sondern ergänzt oder ändert diese für den Einsatz von Rohrverlegern.
Dieses Dokument gibt zudem zusätzliche Anforderungen für heckseitig montierte Winden.
Dieses Dokument enthält keine Leistungsanforderungen an Sicherheitsfunktionen von Steuerungssystemen.
Die folgenden signifikanten und relevanten Gefährdungen werden in diesem Dokument nicht behandelt:
— Kraftübertragung zwischen einer selbstfahrenden Maschine (oder einer Zugmaschine) und einer angetriebenen Maschine;
— Laserstrahlung;
— Blitzschlag.
Rohrverleger mit drehbarem Aufbau sind vom Anwendungsbereich dieses Dokuments ausgenommen.
Dieses Dokument ist nicht anwendbar für Rohrverleger, die vor der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.
Engins de terrassement - Sécurité - Partie 9 : Prescriptions applicables aux poseurs de canalisations
La présente partie du prEN 474 traite de tous les phénomènes, situations et événements dangereux significatifs relatifs aux poseurs de canalisations tels que définis dans l’EN ISO 6165: 2012, lorsqu’ils sont utilisés comme prévu ou dans des conditions de mauvais usage que le fabricant peut raisonnablement prévoir (voir Article 4).
Les prescriptions figurant dans la présente partie viennent en complément des prescriptions communes présentées dans le prEN 474-1:2017.
La présente partie ne répète pas les prescriptions du prEN 474-1:2017 mais en ajoute ou en remplace certaines applicables aux poseurs de canalisations.
La présente partie prescrit les mesures techniques appropriées pour éliminer ou réduire les risques dus aux phénomènes, situations et événements dangereux significatifs survenant lors de la mise en service, du fonctionnement et de la maintenance des poseurs de canalisations.
La présente partie spécifie des prescriptions supplémentaires pour les treuils montés à l’arrière.
Les poseurs de canalisations comportant une superstructure pivotante sont exclus du présent document.
La présente Norme européenne n’est pas applicable aux poseurs de canalisations fabriqués avant la publication de la présente Norme européenne par le CEN.
Stroji za zemeljska dela - Varnost - 9. del: Zahteve za stroje za polaganje cevi
Ta del standarda prEN 474 obravnava vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi s stroji za polaganje cevi iz standarda EN ISO 6165:2006, kadar se uporabljajo v skladu s predvidenim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec (glej točko 4).
Zahteve iz tega dela dopolnjujejo splošne zahteve iz standarda prEN 474-1:2017.
Ta del ne navaja ponovno zahtev iz standarda prEN 474-1:2017, temveč dodaja ali nadomešča zahteve za uporabo strojev za polaganje cevi.
Ta del določa ustrezne tehnične ukrepe za odpravo ali zmanjšanje večjih tveganj, nevarnih situacij in nevarnih dogodkov med usposabljanjem za zagon, obratovanjem in vzdrževanjem strojev za polaganje cevi.
Ta del določa dodatne zahteve za zadaj nameščene vitle.
Stroji za polaganje cevi z vrtljivo zgornjo strukturo ne spadajo na področje uporabe tega dokumenta. Ta evropski standard se ne uporablja za stroje za polaganje cevi, izdelane pred datumom izdaje tega evropskega standarda s strani Evropskega odbora za standardizacijo (CEN).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 474-9:2022
01-maj-2022
Nadomešča:
SIST EN 474-9:2007+A1:2009
Stroji za zemeljska dela - Varnost - 9. del: Zahteve za stroje za polaganje cevi
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
Erdbaumaschinen - Sicherheit - Teil 9: Anforderungen für Rohrverleger
Engins de terrassement - Sécurité - Partie 9 : Prescriptions applicables aux poseurs de
canalisations
Ta slovenski standard je istoveten z: EN 474-9:2022
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-9:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 474-9:2022
---------------------- Page: 2 ----------------------
SIST EN 474-9:2022
EN 474-9
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 53.100 Supersedes EN 474-9:2006+A1:2009
English Version
Earth-moving machinery - Safety - Part 9: Requirements
for pipelayers
Engins de terrassement - Sécurité - Partie 9 : Erdbaumaschinen - Sicherheit - Teil 9: Anforderungen
Prescriptions applicables aux poseurs de canalisations für Rohrverleger
This European Standard was approved by CEN on 14 February 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 474-9:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Safety requirements and/or protective/risk reduction measures . 8
4.1 General . 8
4.2 Operator’s station . 8
4.3 Seat . 8
4.4 Operator's controls and indicators . 8
4.5 Visibility. 9
4.6 Lifting operation . 9
4.7 Rear mounted winch . 10
4.8 Noise emission measurement . 10
5 Verification of the safety requirements and/or protective/risk reduction measures . 11
6 Information for use . 12
6.1 General . 12
6.2 Machine safety label . 12
6.3 Operator’s manual . 13
6.4 Machine marking . 13
Annex A (informative) List of significant hazards . 14
Annex B (informative) Illustrations . 18
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery, and amending
Directive 95/16/EC (recast) [2006 L157] aimed to be covered. 20
Bibliography . 25
2
---------------------- Page: 4 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
European foreword
This document (EN 474-9:2022) has been prepared by Technical Committee CEN/TC 151 “Construction
equipment and building material machines - Safety”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards shall
be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 474-9:2006+A1:2009.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
For bibliographic references, see EN 474-1:2022.
EN 474 “Earth-moving machinery — Safety” comprises the following parts:
— Part 1: General requirements
— Part 2: Requirements for tractor-dozers
— Part 3: Requirements for loaders
— Part 4: Requirements for backhoe-loaders
— Part 5: Requirements for hydraulic excavators
— Part 6: Requirements for dumpers
— Part 7: Requirements for scrapers
— Part 8: Requirements for graders
— Part 9: Requirements for pipelayers
— Part 10: Requirements for trenchers
— Part 11: Requirements for earth and landfill compactors
— Part 12: Requirements for cable excavators
— Part 13: Requirements for rollers
This document is intended for use in combination with part 1 of the series.
3
---------------------- Page: 5 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
The main differences between this document and EN 474-9:2006+A1:2009 are as follows:
a) the normative references (Clause 2) (updated);
b) safety related functions of control systems (excluded);
c) pipelayers shall be equipped with cab, and ROPS, TOPS (4.2) (added);
d) windows shall be provided with motorised wiper(s) and washer in the travelling and lifting (e.g. side
boom application) directions (4.2.2) (added);
e) means shall be provided to ensure operator visibility to the pipe area from the operator station
during the lifting, translation operations and combination of both (4.5) (added);
f) pipelayers are equipped with Load capacity indicator and warning device, Rated capacity limiting,
Hoisting limiter device and Lowering limiter (4.6) (added);
g) the load capacity indicator shall take in account the ground slope condition and provide information
about weight of load and weight rated capacity (4.6.7) (added);
h) pipelayers with a lifting hoist shall be fitted with a lowering limiter. As a minimum, the lowering
limiter shall ensure three turns of rope on the drum. (4.6.10) (added);
i) if a pipelayer is equipped with a rear mounted winch, ISO 19472:2006 shall be used as guidance for
design. (4.7.1) (added);
j) verification methods table (Clause 5) (added);
k) list of significant hazards (Annex A) (updated);
l) Annex ZA (updated).
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
4
---------------------- Page: 6 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
Introduction
This document is a type-C standard as stated in EN ISO 12100.
This document is of relevance, in particular, for the following stakeholder groups representing the market
players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);
— health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.).
Others can be affected by the level of machinery safety achieved with the means of the document by the
above-mentioned stakeholder groups:
— machine users/employers (small, medium and large enterprises);
— machine users/employees (e.g. trade unions, organizations for people with special needs);
— service providers, e.g. for maintenance (small, medium and large enterprises);
— consumers (in case of machinery intended for use by consumers).
The above-mentioned stakeholder groups have been given the possibility to participate at the drafting
process of this document.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are
covered are indicated in the Scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or type-B
standards, the requirements of this type-C standard take precedence over the requirements of the other
standards for machines that have been designed and built according to the requirements of this type-C
standard.
5
---------------------- Page: 7 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
1 Scope
This document, together with EN 474-1:2022, deals with all significant hazards, hazardous situations and
events relevant to pipelayers as defined in 3.1, when used as intended and under the conditions of misuse
which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime
of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in
EN 474-1:2022. This document does not repeat the requirements of EN 474-1:2022 but supplements or
modifies the requirements for pipelayers.
This document also specifies additional requirements for rear mounted winches.
This document does not provide performance requirements for safety related functions of control
system(s).
The following significant and relevant hazards are not covered in this document:
— Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
— Laser;
— Lightning.
Pipelayers with rotating upper structure are excluded from the scope of this document.
This document is not applicable to pipelayers manufactured before the date of publication of this
document by CEN.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 474-1:2022, Earth-moving machinery — Safety — Part 1: General requirements
EN 1032:2003+A1:2008, Mechanical vibration — Testing of mobile machinery in order to determine the
vibration emission value
EN 1677-1:2000+A1:2008, Components for slings — Safety — Part 1: Forged steel components, Grade 8
EN 1677-2:2000+A1:2008, Components for slings — Safety — Part 2: Forged steel lifting hooks with
latch, Grade 8
EN 13000:2010+A1:2014, Cranes — Mobile cranes
EN ISO 3411:2007, Earth-moving machinery — Physical dimensions of operators and minimum operator
space envelope (ISO 3411:2007)
EN ISO 6682:2008, Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986,
including Amd 1:1989)
EN ISO 7096:2020, Earth-moving machinery — Laboratory evaluation of operator seat vibration
(ISO 7096:2020)
EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk
reduction (ISO 12100:2010)
6
---------------------- Page: 8 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
ISO 6393:2008, Earth-moving machinery — Determination of sound power level — Stationary test
conditions
ISO 6394:2008, Earth-moving machinery — Determination of emission sound pressure level at operator’s
position — Stationary test conditions
ISO 6394:2008/Cor 1:2009, Earth-moving machinery — Determination of emission sound pressure level
at operator’s position — Stationary test conditions — Technical Corrigendum 1
ISO 6405-2:2017, Earth-moving machinery — Symbols for operator controls and other displays — Part 2:
Symbols for specific machines, equipment and accessories
ISO 8813:1992, Earth-moving machinery — Lift capacity of pipelayers and wheeled tractors or loaders
equipped with side boom
ISO 10968:2020, Earth-moving machinery — Operator’s controls
ISO 16625:2013, Cranes and hoists — Selection of wire ropes, drums and sheaves
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 474-1:2022, EN ISO 12100:2010
and the following apply.
NOTE Terminology for pipelayers is specified in ISO 7136:2006 and illustrated in Annex B of this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
pipelayer
self-propelled crawler or wheeled machine, having pipe-laying equipment with main frame, a load-hoist
mechanism, vertically pivotable side boom, and counterweight, primarily designed to handle and lay
pipes
[Source: EN ISO 6165:2012]
3.2
hoisting limiter
hoist mechanism
positive locking device to prevent inadvertent lowering of the boom and an automatic means to stop the
boom motion when the maximum permissible height is reached shall both be provided, as defined in
ISO 8813:1992
7
---------------------- Page: 9 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
4 Safety requirements and/or protective/risk reduction measures
4.1 General
4.1.1 Context
Pipelayers shall comply with the safety requirements and/or protective/risk reduction measures of this
clause. In addition, the machines shall be designed according to the principles of EN ISO 12100:2010 for
relevant but not significant hazards which are not dealt with by this document.
4.1.2 Specific relation to EN 474-1
Pipelayers shall comply with the requirements of EN 474-1:2022, as far as not modified or replaced by
the requirements of this part.
There are general requirements specified in EN 474-1:2022 that are not applicable because the risk
assessment has shown that for pipelayers the corresponding hazard does not exist. For pipelayers 4.2.2,
4.4.2, 4.5.10, 4.7.3, 4.10, 4.14.2.3, 4.22.5, 4.23, 4.24, Annex B and Annex D in EN 474-1:2022, are not
applicable.
4.2 Operator’s station
4.2.1 General
EN 474-1:2022, 4.3 shall apply with the addition stated in 4.2.2 below.
4.2.2 Window(s)
EN 474-1:2022, 4.3.2.5 shall apply with the addition that pipelayers shall be provided with motorised
wiper(s) and washer in the travelling and lifting (e.g. side boom application) directions.
4.3 Seat
4.3.1 General
EN 474-1:2022, 4.4.1.4 shall apply with the addition stated in 4.3.2 below.
4.3.2 Vibration
Pipelayers with measured RMS-values on Z-axis, in accordance with EN 1032:2003+A1:2008, higher than
2
0,5 m/s shall be equipped with a suspended seat complying with EN ISO 7096:2020 class EM6. As an
alternative without testing the machine, the pipelayers shall be equipped with a suspended seat
complying with EN ISO 7096:2020 class EM6.
NOTE RMS means root mean square.
4.4 Operator's controls and indicators
4.4.1 General
EN 474-1:2022, 4.5 applies with the following modifications in 4.4.2 below.
4.4.2 Emergency attachment lowering (Free fall function)
The emergency device to release the load shall be reachable by the operator within the cabin, according
to EN ISO 6682:2008.
The free fall function should be used only for emergency purposes and not for normal working purposes
(e.g. fast lowering).
8
---------------------- Page: 10 ----------------------
SIST EN 474-9:2022
EN 474-9:2022 (E)
4.5 Visibility
EN 474-1:2022, 4.8 applies with the following additions:
Means shall be provided to ensure operator visibility to the pipe area from the operator station during
the lifting, translation operations and combination of both.
This requirement may be fulfilled either e.g.:
— by providing a seat turned to the direction of the boom, or
— by providing a slewable and lockable seat to the direction of the boom.
4.6 Lifting operation
4.6.1 General
EN 474-1:2022, 4.12 shall apply with the additions stated in 4.6 of this document.
4.6.2 Lifting capacity
Lifting equipment shall meet all the requirements in ISO 8813:1992.
4.6.3 Load lowering speed
A device to control the lowering speed of the boom and the hook shall be fitted so that the operator can
control movement of the load with modulation and is able to stop the load at all load conditions up to and
including rated lift capacity during normal operating conditions.
NOTE Emergency attachment lowering is covered in 4.4.2 of this document.
4.6.4 Pipe laying brakes
The pipe laying system shall be fitted with brakes which can be released by controls and automatically
applied when the operator stops actuating or when the power source fails. The brakes shall be designed
to withstand 1,5 times the rated lift capacity under conditions
...
SLOVENSKI STANDARD
oSIST prEN 474-9:2017
01-junij-2017
Stroji za zemeljska dela - Varnost - 9. del: Zahteve za stroje za polaganje cevi
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
Engins de terrassement - Sécurité - Partie 9 : Prescriptions applicables aux poseurs de
canalisations
Ta slovenski standard je istoveten z: prEN 474-9
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
oSIST prEN 474-9:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 474-9:2017
---------------------- Page: 2 ----------------------
oSIST prEN 474-9:2017
DRAFT
EUROPEAN STANDARD
prEN 474-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 53.100 Will supersede EN 474-9:2006+A1:2009
English Version
Earth-moving machinery - Safety - Part 9: Requirements
for pipelayers
Engins de terrassement - Sécurité - Partie 9 :
Prescriptions applicables aux poseurs de canalisations
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 151.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 474-9:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 474-9:2017
prEN 474-9:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 List of additional significant hazards . 5
5 Safety requirements and/or measures . 5
5.1 General . 5
5.2 Operator’s station . 6
5.2.1 Window(s) . 6
5.2.2 Operator’s seat . 6
5.3 Stability and lifting equipment . 6
5.3.1 General . 6
5.3.2 Lifting equipment . 6
5.4 Rear mounted winch . 6
5.4.1 General . 6
5.4.2 Mounting . 7
5.4.3 Controls . 7
5.4.4 Protection against back-lash of the rope . 7
5.5 Noise . 7
5.5.1 Sound power level . 7
5.5.2 Emission sound pressure level at operator’s station . 7
6 Information for use . 7
6.1 Warning signs . 7
6.2 Operation manual . 7
6.3 Machine marking . 7
Annex A (normative) List of additional significant hazards – Pipelayers . 8
Annex B (informative) Illustrations . 9
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery, and amending
Directive 95/16/EC (recast) [2006 L157] aimed to be covered. 11
Bibliography . 12
2
---------------------- Page: 4 ----------------------
oSIST prEN 474-9:2017
prEN 474-9:2017 (E)
European foreword
This document (prEN 474-9:2017) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by
DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 474-9:2006+A1:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
For bibliographic references, see prEN 474-1:2017.
prEN 474 ”Earth-moving machinery — Safety” comprises the following parts:
— Part 1: General requirements
— Part 2: Requirements for tractor-dozers
— Part 3: Requirements for loaders
— Part 4: Requirements for backhoe-loaders
— Part 5: Requirements for hydraulic excavators
— Part 6: Requirements for dumpers
— Part 7: Requirements for scrapers
— Part 8: Requirements for graders
— Part 9: Requirements for pipelayers
— Part 10: Requirements for trenchers
— Part 11: Requirements for earth and landfill compactors
— Part 12: Requirements for cable excavators
— Part 13: Requirements for rollers
This European Standard is intended for use in combination with part 1 of the series.
3
---------------------- Page: 5 ----------------------
oSIST prEN 474-9:2017
prEN 474-9:2017 (E)
Introduction
This part of prEN 474 is a type C standard as stated in EN ISO 12100:2010.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered
are indicated in the scope of this European Standard.
When provisions of this type C standard are different from those which are stated in type A or B
standards, the provisions of this type C standard take precedence over the provisions of the other
standards, for machines that have been designed and built according to the provisions of this type C
standard.
1 Scope
This part of prEN 474 deals with all significant hazards, hazardous situations and events relevant to
pipelayers as defined in EN ISO 6165:2012 when they are used as intended and under conditions of
misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1:2017.
This part does not repeat the requirements from prEN 474-1:2017 but adds or replaces the requirements
for application for pipelayers.
This part specifies the appropriate technical measures to eliminate or reduce risks arising from the
significant hazards, hazardous situations and events during commissioning, operation and maintenance
of pipelayers.
This part specifies additional requirements for rear mounted winches.
Pipelayers with rotating upper structure are excluded from the scope of this document. This European
Standard is not applicable to pipelayers manufactured before the date of publication of this European
Standard by CEN.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.