SIST EN ISO 1179-3:2008

Oznaka standarda: SIST EN ISO 1179-3:2008
Koda projekta: EC029118
Organizacija: SIST
Naslov (angleški): Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
Naslov (slovenski): Priključki za splošno uporabo in za fluidno tehniko - Odprtine in priključki z navoji po ISO 228-1 in z elastomernim ali kovinskim tesnjenjem - 3. del: Ravni zaključki s tesnilkami O in podpornim obročkom (tipa G in H) za majhne obremenitve (serija L) (ISO 1179-3:2007)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN ISO 1179-3:2008 angleški jezik Active SIST-F: 65.34 EUR
PDF
Papir
Tehnični odbor: IFEK - Železne kovine
ICS: 23.100.40
Status: Objavljen
Objavljen: 01-jul-2008
Refer. št. objave: Sporočila 2008-07
Referenčna oznaka: EN ISO 1179-3:2008
Področje projekta (angleško): This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustable and adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring (types G and H, respectively). Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable stud ends (type H). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 to assure that components made to this part of ISO 1179 comply with the performance ratings.

Najbolje prodajani standardi