Threaded pipe fitting in malleable cast iron

This standard specifies the requirements for the design and performance of threaded pipe fittings in malleable cast iron. These fittings are for general purposes for the transmission of fluids and gases up to the limits of pressure and temperature specified in this standard. They are intended for the connection  of elements threaded in accordance with ISO 7-1, sizes 1/8 to 6. For use in conditions outside the pressure and temperature limits specified, reference shall be made to the manufacturer.

Gewindefittings aus Temperguß

Diese Norm legt Anforderungen an die Konstruktion und Anwendungsmerkmale von Temperguss-Gewindefittings fest. Diese Fittings dienen allgemein der Fortleitung  von Flüssigkeiten und Gasen bis zu den in dieser Norm festgelegten Druck- und Temperaturgrenzen. Sie sind bestimmt für die Verbindung von Teilen mit Gewinden nach ISO 7-1, Grössen 1/8 bis 6. Bei Verwendung unter Bedingungen, die ausserhalb der festgelegten Druck- und Temperaturgrenzen liegen, ist mit dem Hersteller Rücksprache zu halten.

Raccords de tuyauterie filetés en fonte malléable

La présente norme spécifie les caractériques de conception et d'utilisation des raccords de tuyauterie filetés en fonte malléable. Ces raccords, d'usage général, servent au transport de fluides et de gaz dans les limites de pression et de température spécifiées dans la présente Norme Internationale. Ils sont prévus pour le raccordement d'éléments filetés conformément a l'ISO 7-1, diametres 1/8 a 6. En cas d'utilisation en dehors de la plage spécifiée de pression ou de température, il y a lieu de se référer aux indications du fabricant.

Fitingi z navojem iz temprane litine

General Information

Status
Published
Publication Date
30-Apr-1997
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-1997
Due Date
01-May-1997
Completion Date
01-May-1997

Relations

Buy Standard

Standard
EN 10242:1997
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fitingi z navojem iz temprane litineGewindefittings aus TempergußRaccords de tuyauterie filetés en fonte malléableThreaded pipe fitting in malleable cast iron23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 10242:1994SIST EN 10242:1997en01-maj-1997SIST EN 10242:1997SLOVENSKI
STANDARD



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.