Insulating, sheathing and covering materials for low voltage energy cables -- Part 7: Halogen-free, thermoplastic insulating compounds

This part of EN 50363 specifies the requirements for the physical properties of the harmonised halogen-free thermoplastic insulating compounds given in Table 1. The relevant test methods are given in EN 60811 series, EN 50267-2 (series), EN 60684-2 and EN 50396.

Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen -- Teil 7: Halogenfreie, thermoplastische Isoliermischungen

Dieser Teil der EN 50363 legt die Anforderungen an halogenfreie, thermoplastische Isoliermischungen fest, die in Tabelle 1 aufgeführt sind. Die entsprechenden Prüfverfahren sind in den Normen der  Reihe EN 60811, der  Reihe EN 50267-2, EN 60684-2 und EN 50396  beschrieben.

Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension -- Partie 7: Mélanges thermoplastiques sans halogène pour enveloppe isolante

La présente partie de la EN 50363 mentionne les prescriptions d’essais pour les propriétés physiques de mélange(s) thermoplastique(s) sans halogène pour enveloppe isolante, donnés dans le Tableau 1. Les méthodes d’essais appropriées sont données dans la série EN 60811, la série EN 50267 2, la EN 60684-2 et la EN 50396.

Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov - 7. del: Plastomerne mase za izoliranje brez halogenov

General Information

Status
Published
Publication Date
30-Sep-2006
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Oct-2006
Due Date
01-Oct-2006
Completion Date
01-Oct-2006

Buy Standard

Standard
EN 50363-7:2006
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST EN 50363-7:2006SLOVENSKIoktober 2006
STANDARDMateriali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov - 7. del: Plastomerne mase za izoliranje brez halogenovInsulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 50363-7:2006(en)ICS29.035.20; 29.060.20







EUROPEAN STANDARD
EN 50363-7 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50363-7:2005 E ICS 29.035.20
English version
Insulating, sheathing and covering materials
for low voltage energy cables Part 7: Halogen-free, thermoplastic insulating compounds
Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension Partie 7: Mélanges thermoplastiques sans halogène pour enveloppe isolante
Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen Teil 7: Halogenfreie, thermoplastische Isoliermischungen
This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 50363-7:2005 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric cables.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50363-7 on 2005-11-01. EN 50363 (in all its parts) supersedes the equivalent information at present in HD 21.1 S4, HD 21.14 S1, HD 22.1 S4, HD 22.10 S1, HD 22.14 S2 and prHD 21.15 S1. The existing information in these HDs will be deleted at the next maintenance review. EN 50363-7 should be read in conjunction with EN 50363-0. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2006-11-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2007-11-01



– 3 – EN 50363-7:2005
Contents
1 Scope.4 2 Normative references.4 3 Definitions.4 4 Properties.4 Table 1 – Types of halogen-free thermoplastic insulating compounds.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.