SIST EN 14039:2005

Oznaka standarda: SIST EN 14039:2005
Koda projekta: 00444002
Organizacija: SIST
Naslov (angleški): Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
Naslov (slovenski): Karakterizacija odpadkov - Določevanje ogljikovodikov v območju od C10 do C40 s plinsko kromatografijo
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 14039:2005 angleški jezik Active SIST-F: 65.34 EUR
PDF
Papir
Tehnični odbor: KAT - Karakterizacija tal, odpadkov in blata
ICS: 13.030.01 71.040.50
Status: Objavljen
Objavljen: 01-Mar-2005
Refer. št. objave: Sporocila 2005-03-01
Referenčna oznaka: EN 14039:2004
Področje projekta (angleško): This document specifies a method for the quantitative determination of the hydrocarbon content (C10 to C40) in solid waste by gas chromatography. It is applicable to hydrocarbon content between 100 mg/kg and 10 000 mg/kg expressed as dry matter basis. Using this standard all hydrocarbons with a boiling range of approximately 175 °C to 525 °C, e.g. n-alkanes from C10H22 to C40H82, isoalkanes, cycloalkanes, alkyl benzenes, alkyl naphthalenes and polycyclic aromatic compounds are determined as hydrocarbons, provided they do not adsorb on the Florisil column during clean-up. Volatile hydrocarbons cannot be quantitatively determined using this standard. This will affect the determination of some common hydrocarbon fuels, e.g. petrol. NOTE 1 On the basis of the peak pattern of the gas chromatogram (see Annex A) and of the boiling points of the individual n alkanes listed in Annex B the approximate boiling range of the hydrocarbons and some qualitative information on the nature of the hydrocarbons can be obtained. NOTE 2 At the moment there is no sufficient information on how to handle organic liquid wastes for the analysis of hydrocarbons. NOTE 3 Aqueous liquid waste samples can be analysed in accordance with EN ISO 9377-2 or the procedure specified in Annex E. NOTE 3 Aqueous liquid waste samples can be analysed according to EN ISO 9377-2 or the procedure specified in annex E.

Najbolje prodajani standardi