Hardmetals - Sampling and testing (ISO 4489:2019)

This document specifies procedures for sampling and testing of hardmetals for the determination of their physical and mechanical characteristics.

Sinterhartmetalle - Probenahme und Prüfung (ISO 4489:2019)

Dieses Dokument legt Verfahren für die Probenahme und Prüfung von Hartmetallen zur Bestimmung ihrer physikalischen und mechanischen Eigenschaften fest.

Métaux-durs - Échantillonnage et essais (ISO 4489:2019)

Le présent document spécifie des procédures d'échantillonnage et d'essai des métaux-durs pour la détermination de leurs propriétés physiques et mécaniques.

Trdine - Vzorčenje in preskušanje (ISO 4489:2019)

Ta dokument določa postopke za vzorčenje in preskušanje trdih kovin za določanje njihovih fizičnih in mehanskih lastnosti.

General Information

Status
Published
Public Enquiry End Date
30-Jun-2018
Publication Date
04-Nov-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Oct-2019
Due Date
29-Dec-2019
Completion Date
05-Nov-2019

Relations

Buy Standard

Standard
EN ISO 4489:2020
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4489:2020
01-januar-2020
Nadomešča:
SIST EN 24489:2000
Trdine - Vzorčenje in preskušanje (ISO 4489:2019)
Hardmetals - Sampling and testing (ISO 4489:2019)
Sinterhartmetalle - Probenahme und Prüfung (ISO 4489:2019)
Métaux-durs - Échantillonnage et essais (ISO 4489:2019)
Ta slovenski standard je istoveten z: EN ISO 4489:2019
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 4489:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4489:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 4489:2020


EN ISO 4489
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 77.160 Supersedes EN 24489:1993
English Version

Hardmetals - Sampling and testing (ISO 4489:2019)
Métaux-durs - Échantillonnage et essais (ISO Hartmetalle - Probenahme und Prüfung (ISO
4489:2019) 4489:2019)
This European Standard was approved by CEN on 4 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4489:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 4489:2020
EN ISO 4489:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 4489:2020
EN ISO 4489:2019 (E)
European foreword
This document (EN ISO 4489:2019) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 24489:1993.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 4489:2019 has been approved by CEN as EN ISO 4489:2019 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 4489:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 4489:2020
INTERNATIONAL ISO
STANDARD 4489
Second edition
2019-09
Hardmetals — Sampling and testing
Métaux-durs — Échantillonnage et essais
Reference number
ISO 4489:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 4489:2020
ISO 4489:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 4489:2020
ISO 4489:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 1
5 Testing . 2
6 Test report . 2
Bibliography . 3
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 4489:2020
ISO 4489:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.