Small craft - Graphical symbols (ISO 11192:2005)

This International Standard specifies graphical symbols for operator controls, gauges, tell-tales, indicators,
instructions and warnings against risks in small craft and for engines and other equipment intended to be used
for small craft of up to 24 m length of hull.

Kleine Wasserfahrzeuge - Graphische Symbole (ISO 11192:2005)

Petits navires - Symboles graphiques (ISO 11192:2005)

L'ISO 11192:2005 spécifie les symboles graphiques relatifs aux commandes pour l'opérateur, aux jauges, aux voyants, aux indicateurs, aux instructions et aux avertissements contre les risques dans les petits navires et relatifs aux moteurs et autres équipements destinés à être utilisés sur des petits navires dont la longueur de coque est inférieure ou égale à 24 m.

Mala plovila - Grafični simboli (ISO 11192:2005)

Ta mednarodni standard določa grafične simbole za krmilnike, merilnike, kontrolne naprave, kazalnike, navodila in opozorila pred nevarnostmi pri malih plovilih ter za motorje in drugo opremo, namenjeno za uporabo pri malih plovilih z dolžino trupa do 24 m.

General Information

Status
Published
Public Enquiry End Date
14-Mar-2018
Publication Date
14-Oct-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Oct-2018
Due Date
16-Dec-2018
Completion Date
15-Oct-2018

Relations

Buy Standard

Standard
EN ISO 11192:2018 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11192:2018 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11192:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 11192:2006
0DODSORYLOD*UDILþQLVLPEROL ,62
Small craft - Graphical symbols (ISO 11192:2005)
Kleine Wasserfahrzeuge - Graphische Symbole (ISO 11192:2005)
Petits navires - Symboles graphiques (ISO 11192:2005)
Ta slovenski standard je istoveten z: EN ISO 11192:2018
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
47.080 ýROQL Small craft
SIST EN ISO 11192:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11192:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 11192:2018


EN ISO 11192
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 47.080; 01.080.20 Supersedes EN ISO 11192:2005
English Version

Small craft - Graphical symbols (ISO 11192:2005)
Petits navires - Symboles graphiques (ISO Kleine Wasserfahrzeuge - Graphische Symbole (ISO
11192:2005) 11192:2005)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11192:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11192:2018
EN ISO 11192:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11192:2018
EN ISO 11192:2018 (E)
European foreword
The text of ISO 11192:2005 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 11192:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11192:2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 11192:2005 has been approved by CEN as EN ISO 11192:2018 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11192:2018
EN ISO 11192:2018 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2013/53/EU
Essential Clause(s)/sub-clause(s) Remarks/Notes
Requirements of of this EN
Directive
2013/53/EU
All clauses All Clauses This standard specifies graphical symbols that
shall be used, as appropriate, in the harmonised
Annex 1 - essential
standards which provide a presumption of
requirements
conformity with the essential requirements of
Directive 2013/53/EU.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
4

---------------------- Page: 6 ----------------------

SIST EN ISO 11192:2018


INTERNATIONAL ISO
STANDARD 11192
First edition
2005-11-01

Small craft — Graphical symbols
Petits navires — Symboles graphiques




Reference number
ISO 11192:2005(E)
©
ISO 2005

---------------------- Page: 7 ----------------------

SIST EN ISO 11192:2018
ISO 11192:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11192:2018
ISO 11192:2005(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Use of graphical symbols . 2
5 Contents . 2
6 Symbol colours . 2
7 Media. 3
8 Conditions . 4
9 Boat components. 6
10 Marine engine components . 7
11 Boat operation. 9
12 Engine operation. 10
13 Engine operation (fuel). 10
14 Engine operation (charge air). 11
15 Engine operation (exhaust gas) . 12
16 Engine operation (liquid coolant). 13
17 Engine operation (engine lubricating oil). 13
18 Engine operation (transmission lubricating oil). 14
19 Warning, caution, malfunction . 15
20 Miscellaneous . 16
Bibliography . 17

© ISO 2005 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11192:2018
ISO 11192:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11192 was prepared by Technical Committee ISO/TC 188, Small craft.

iv © ISO 2005 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 11192:2018
INTERNATIONAL STANDARD ISO 11192:2005(E)

Small craft — Graphical symbols
1 Scope
This International Standard specifies graphical symbols for operator controls, gauges, tell-tales, indicators,
instructions and warnings against risks in small craft and for engines and other equipment intended to be used
for small craft of up to 24 m length of hull.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3864-1:2002, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety
signs in workplaces and public areas
ISO 7000:2004, Graphical symbols for use on equipment — Index and synopsis
ISO 7010:2003, Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and
public areas
ISO 17724:2003, Graphical symbols — Vocabulary
IEC 60417-DB-12M:2002, Graphical symbols for use on equipment
IEC 80416-1:2001, Basic principles for graphical symbols for use on equipment — Part 1: Creation of symbol
originals
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
graphical symbol
visually perceptible figure with a particular meaning used to transmit information independently of language
[ISO 17724:2003, definition 31]
3.2
graphical symbol element
part of a graphical symbol with a particular meaning
[ISO 17724:2003, definition 32]
NOTE 1 Letters, numerals, punctuation marks and mathematical symbols may be used as graphical symbol elements.
NOTE 2 To represent certain concepts, graphical symbols or graphical symbol elements may be combined to form a
new graphical symbol. The meaning assigned to the new graphical symbol is consistent with the meanings of the
individual graphical symbols or graphical symbol elements used.
© ISO 2005 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 11192:2018
ISO 11192:2005(E)
3.3
graphical symbol original
graphical symbol with which a referent, a graphical representation and a description of the application are
associated
[ISO 17724:2003, definition 33]
4 Use of graphical symbols
Instructions for use of graphical symbols, including symbol originals and restyled symbols, and for positioning
and size
...

SLOVENSKI STANDARD
oSIST prEN ISO 11192:2018
01-marec-2018
0DODSORYLOD*UDILþQLVLPEROL ,62
Small craft - Graphical symbols (ISO 11192:2005)
Kleine Wasserfahrzeuge - Graphische Symbole (ISO 11192:2005)
Petits navires - Symboles graphiques (ISO 11192:2005)
Ta slovenski standard je istoveten z: prEN ISO 11192
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
47.080 ýROQL Small craft
oSIST prEN ISO 11192:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11192:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11192:2018


DRAFT
EUROPEAN STANDARD
prEN ISO 11192
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2017
ICS 47.080; 01.080.20 Will supersede EN ISO 11192:2005
English Version

Small craft - Graphical symbols (ISO 11192:2005)
Petits navires - Symboles graphiques (ISO Kleine Wasserfahrzeuge - Graphische Symbole (ISO
11192:2005) 11192:2005)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/SS T01.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 11192:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11192:2018
prEN ISO 11192:2017 (E)
Contents
Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11192:2018
prEN ISO 11192:2017 (E)
European foreword
The text of ISO 11192:2005 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as prEN ISO 11192:2017.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN ISO 11192:2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
Endorsement notice
The text of ISO 11192:2005 has been approved by CEN as prEN ISO 11192:2017 without any
modification.
3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11192:2018
prEN ISO 11192:2017 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1: Correspondence between this European Standard and Annex I of Directive
2013/53/EU
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2013/53/EU this EN
All clauses All Clauses This standard specifies graphical
Annex 1 - essential requirements symbols that shall be used, as
appropriate, in the harmonised
standards which provide a
presumption of conformity with the
essential requirements of Directive
2013/53/EU.

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of this
standard.
4

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11192:2018


INTERNATIONAL ISO
STANDARD 11192
First edition
2005-11-01

Small craft — Graphical symbols
Petits navires — Symboles graphiques




Reference number
ISO 11192:2005(E)
©
ISO 2005

---------------------- Page: 7 ----------------------
oSIST prEN ISO 11192:2018
ISO 11192:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 11192:2018
ISO 11192:2005(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Use of graphical symbols . 2
5 Contents . 2
6 Symbol colours . 2
7 Media. 3
8 Conditions . 4
9 Boat components. 6
10 Marine engine components . 7
11 Boat operation. 9
12 Engine operation. 10
13 Engine operation (fuel). 10
14 Engine operation (charge air). 11
15 Engine operation (exhaust gas) . 12
16 Engine operation (liquid coolant). 13
17 Engine operation (engine lubricating oil). 13
18 Engine operation (transmission lubricating oil). 14
19 Warning, caution, malfunction . 15
20 Miscellaneous . 16
Bibliography . 17

© ISO 2005 – All rights reserved iii

---------------------- Page: 9 ----------------------
oSIST prEN ISO 11192:2018
ISO 11192:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11192 was prepared by Technical Committee ISO/TC 188, Small craft.

iv © ISO 2005 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 11192:2018
INTERNATIONAL STANDARD ISO 11192:2005(E)

Small craft — Graphical symbols
1 Scope
This International Standard specifies graphical symbols for operator controls, gauges, tell-tales, indicators,
instructions and warnings against risks in small craft and for engines and other equipment intended to be used
for small craft of up to 24 m length of hull.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3864-1:2002, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety
signs in workplaces and public areas
ISO 7000:2004, Graphical symbols for use on equipment — Index and synopsis
ISO 7010:2003, Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and
public areas
ISO 17724:2003, Graphical symbols — Vocabulary
IEC 60417-DB-12M:2002, Graphical symbols for use on equipment
IEC 80416-1:2001, Basic principles for graphical symbols for use on equipment — Part 1: Creation of symbol
originals
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
graphical symbol
visually perceptible figure with a particular meaning used to transmit information independently of language
[ISO 17724:2003, definition 31]
3.2
graphical symbol element
part of a graphical symbol with a particular meaning
[ISO 17724:2003, definition 32]
NOTE 1 Letters, numerals, punctuation marks and mathematical symbols may be used as graphical symbol elements.
NOTE 2 To represent certain concepts, graphical symbols or graphical symbol elements may be combined to form a
new graphical symbol. The meaning assigned to the new graphical symbol is consistent with the meanings of the
individual graphical symbols or graphical symbol elements used.
© ISO 2005 – All rights reserved 1

---------------------- Page: 11 ----------------------
oSIST prEN ISO 11192:2018
ISO 11192:2005(E)
3.3
graphical symbol original
graphical symbol with which a referent, a graphical representation and a description of the application are
associated
[ISO 17724:2003, definition 33]
4 Use of graphical symbols
Instructions for use of graphical symbols, including symbol originals and restyled symbols, and for positioning
and size of graphical symbols are given in ISO 7000, ISO 7010, IEC 60417-DB-12M and IEC 80416-1.
5 Contents
This International Standard contains symbols for
⎯ media;
⎯ conditions;
⎯ boat components;
⎯ marine engine components;
⎯ boat operation;
⎯ engine operation;
⎯ warning, caution, malfunction;

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.