SIST HD 134.2 S2:2002

SLOVENSKI SIST HD 134.2 S2:2002
prva izdaja
STANDARD
september 2002
Radio-frequency connectors - Part 2: Coaxial unmatched connector
ICS 33.120.30 Referenčna številka
SIST HD 134.2 S2:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

CEI
NORME
INTERNATIONALE IEC
169-2
INTERNATIONAL
Première édition
STANDARD
First edition
1965
Connecteurs pour fréquences radioélectriques
Deuxième partie:
Connecteur coaxial non adapté
Radio-frequency connectors
Part 2:
Coaxial unmatched connector
réservés — Copyright — all rights reserved
© CEI 1965 Droits de reproduction
No part of this publication may be reproduced or utilized in
Aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Genève, Suisse
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
PRICE CODE H
Mem,ayHapomiaa 3neKrporexHH gecnan HoMKCCHe
IEC
• Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

---------------------- Page: 2 ----------------------

C Publication 169-2 (1965)
Publication 169-2 (1965) de la CE! I E
CORRIGENDUM
of the title:
du titre : Replace the second line
Remplacer la seconde ligne
Part 2: Coaxial unmatched television aerial feeder
Connecteur coaxial non adapté de Deuxième partie :
connector
descentes d'antennes de télévision
as follows:
par la suivante:
Coaxial unmatched connector.
coaxial non adapté. Part 2:
Deuxième partie: Connecteur
October 1975
Octobre 1975

---------------------- Page: 3 ----------------------

3
INTERNATIONAL ELECTROTECHNICAL COMMISSION
RADIO-FREQUENCY CONNECTORS
Coaxial unmatched connector
Part 2:
FOREWORD
I) The formal decisions or agreements of the I E C on technical matters, prepared by Technical Committees on which
all the National Committees having a special interest therein are represented, express, as nearly as possible, an inter-
national consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National Committees in
that sense.
3) In order to promote this international unification, the I EC expresses the wish that all National Committees having
as yet no national rules, when preparing such rules, should use the I EC recommendations as
the fundamental basis
for these rules in so far as national conditions will permit.
4) The desirability is recognized of extending international agreement on these matters through an endeavour to harmonize
national standardization rules with these recommendations in so far as national conditions will permit. The National
Committees pledge their influence towards that end.
5) The I EC has not laid down any procedure concerning marking as an indication of approval and has no responsibility
when an item of equipment is declared to comply with one of its recommendations.
PREFACE
This Recommendation was prepared by Sub-Committee 40-2, R.F. Transmission Lines and their
Accessories (now Sub-Committee 46A, R.F. Cables and their Accessories). It forms Part 2 of the
complete Recommendation for r.f. connectors.
Part 1, General Requirements and Measuring Methods, with which this publication must be used,
is issued as I E C Publication 169-1. The complete Recommendation will include other parts laying down
detailed specifications for other types of connectors. These additional parts will be issued from time-to-time
as they become ready.
The first draft of Part 2 was discussed at the meeting held in Ulm in 1959, and as a result a proposal
was submitted to the National Committees for approval under the Six Months' Rule in August 1960.
Although one unfavourable vote has been received, it was decided during the meeting in Interlaken
(1961) to publish this document as a specification sheet of I E C Publication 169.
The following countries voted explicitly in favour of publication of Part 2 :
Belgium Portugal
Czechoslovakia Romania
Denmark Sweden
Finland Switzerland
Germany Turkey
Hungary United Kingdom
Japan United States of America
Norway Yugoslavia

---------------------- Page: 4 ----------------------

5
RADIO-FREQUENCY CONNECTORS
unmatched connector
Part 2 : Coaxial
Dimensions
1.
1.1 Connector
d
Optional
insulation

FIGURE 2
FIGURE 1
The millimetre dimensions are derived from the original inch dimensions.
f g h
a b c d e
8.05 9.525 0.8 7.11 9.1 7.54
mm 1.3 2.36
min min min
min min
±0.4
=0.076 ±0.05
0.280 23/64 19/64
0.051 0.093 0.317 0.375 1/32
in
min min min
min min
_0.003 ±0.002 ±1/64

---------------------- Page: 5 ----------------------

7
1.2 Gauges
ea
FIGURE 5 FIGURE 6
FIGURE 3 FIGURE 4
0.5
denotes a maximum surface roughness of Ra = 0.5 E m (20 µ in).
Note. — J
The millimetre dimensions are derived from the original inch dimensions.
a b c d
2.286 9.575 9.474
2.438
mm 0 +0.01 0 +0.01
— 0.01 0 — 0.01 0
0.0960 0.0900 — 0.3770 0.3730
in 0 + 0.0004 0 + 0.0004
— 0.0004 0 — 0.0004 0
Gauge for Figure Material
Sizing purposes 3 and 5 Steel (hardened)
Measurement of contact resistance 4 and 6 Under consideration
Measurement of gauge retention 4 and 6 Steel (hardened)
force Weight : gauge Fig. 4 :
Under consideration
gauge Fig. 6:
Under consideration

---------------------- Page: 6 ----------------------

-9-
1.3 Mating component for socket connectors for endurance test
Material: steel (hardened).
ea
FIG
...