SIST EN 1548:2008
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen
This European Standard specifies a method of exposing test specimens of plastic and rubber sheets for roofing free from all external restraint, to contact with bitumen at an elevated temperature and methods for determining the changes in properties resulting from such exposure.
The methods for determination of changes in properties are specified as follows:
a) changes in mass directly after contact with bitumen;
b) changes in physical properties after contact with bitumen.
Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Verhalten nach Lagerung auf Bitumen
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomeres - Méthode d'exposition au bitume
La présente Norme européenne spécifie une méthode d’exposition d’éprouvettes de feuilles d'étanchéité de toiture plastiques et élastomères en contact avec du bitume à une température élevée, libres de toute contrainte extérieure, et des méthodes pour déterminer les changements de propriétés résultant de cette exposition.
Les méthodes de détermination des changements de propriétés spécifiées portent sur les aspects suivants :
a) les changements de masse directement après contact avec le bitume ;
b) les changements de propriétés physiques après contact avec le bitume.
Hidroizolacijski trakovi - Polimerni in elastomerni trakovi za tesnjenje streh - Metoda izpostave bitumnu
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Polimerni in elastomerni trakovi za tesnjenje streh - Metoda izpostave bitumnuAbdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Verhalten nach Lagerung auf BitumenFeuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomeres - Méthode d'exposition au bitumeFlexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 1548:2007SIST EN 1548:2008en,fr,de01-februar-2008SIST EN 1548:2008SLOVENSKI
STANDARD
SIST EN 1548:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1548September 2007ICS 91.100.50 English VersionFlexible sheets for waterproofing - Plastic and rubber sheets forroof waterproofing - Method for exposure to bitumenFeuilles souples d'étanchéité - Feuilles d'étanchéité detoiture plastiques et élastomères - Méthode d'exposition aubitumeAbdichtungsbahnen - Kunststoff- und Elastomerbahnen fürDachabdichtungen - Verhalten nach Lagerung auf BitumenThis European Standard was approved by CEN on 27 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1548:2007: ESIST EN 1548:2008
EN 1548:2007 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 General.6 5 Principle.7 6 Apparatus.7 6.1 Metal plate.7 6.2 Metal mask.7 6.3 Glass plate.7 6.4 Separation means.7 6.5 Thermometer.7 6.6 Balance.7 6.7 Dial micrometer.7 6.8 Calliper gauge.8 6.9 Ventilated oven.8 6.10 Bitumen.8 7 Sampling.8 8 Preparation of test specimens.8 9 Procedure.8 9.1 Test bitumen.8 9.2 Temperature.8 9.3 Exposure duration.8 9.4 Exposure to contact with bitumen.9 9.4.1 Test specimens.9 9.4.2 Reference specimens.9 9.5 Determination of changes in mass.9 9.5.1 Test specimen.9 9.5.2 Initial value.9 9.5.3 Exposure.9 9.5.4 Measurement of mass.9 9.6 Determination of changes in Young's Modulus.9 9.6.1 Test specimen.9 9.6.2 Exposure.10 9.6.3 Determination of Young's Modulus.10 10 Expression of results.10 10.1 Changes in mass.10 10.1.1 Change in mass.10 10.1.2 Change in mass per unit area.10 10.1.3 Percentage change in mass.10 10.2 Young's Modulus.11 11 Test report.11 Annex A (informative)
Additional information.12 Annex B (informative)
Calibration of apparatus.13 SIST EN 1548:2008
EN 1548:2007 (E) 3 B.1 Temperature calibration.13 B.2 Ventilation calibration.13
SIST EN 1548:2008
EN 1548:2007 (E) 4 Foreword This document (EN 1548:2007) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1548:2008
EN 1548:2007 (E) 5 Introduction This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or supplied before use. This test method relates exclusively to products or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. SIST EN 1548:2008
EN 1548:2007 (E) 6
1 Scope This European Standard specifies a method of exposing test specimens of plastic and rubber sheets for roofing free from all external restraint, to contact with bitumen at an elevated temperature and methods for determining the changes in properties resulting from such exposure. The methods for determination of changes in properties are specified as follows: a) changes in mass directly after contact with bitumen; b) changes in physical properties after contact with bitumen. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1849-2, Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 2: Plastic and rubber sheets for roof waterproofing EN 12311-2, Flexible sheets for waterproofing – Determination of tensile properties – Part 2: Plastic and rubber sheets for roof waterproofing EN 13416, Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Rules
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.