Engineering Data Exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 2: Role class libraries (IEC 62714-2:2015)

The IEC 62714 series specifies an engineering data exchange format for use in industrial
automation systems.
This part of IEC 62714 specifies normative as well as informative AML role class libraries for
the modelling of engineering information for the exchange between engineering tools in the
plant automation area by means of AML. Moreover, it presents additional user defined
libraries as an example. Its provisions apply to the export/import applications of related tools.
This part of IEC 62714 does not define details of the data exchange procedure or
implementation requirements for the import/export tools.

Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme - Automation markup language – Teil 2: Rollenbibliotheken (IEC 62714-2:2015)

Format d'échange de données techniques pour une utilisation dans l'ingénierie des systèmes d'automatisation industrielle - Automation markup language - Partie 2: Bibliothèques de classes de rôles (IEC 62714-2:2015)

L'IEC 62714-2:2015 spécifie les bibliothèques de classes de rôles AML normatives et informatives pour la modélisation des informations techniques en vue de l'échange de données entre les outils techniques dans le domaine de l'automatisation d'installations par le biais du langage AML. Elle présente en outre des bibliothèques définies par l'utilisateur supplémentaires à titre d'exemple. Ses dispositions s'appliquent aux fonctions exportation / importation des outils associés.

Oblika izmenjave tehničnih podatkov za uporabo v industrijskem inženiringu avtomatizacije sistemov - Označevalni jezik za avtomatizacijo - 2. del: Vloga razreda knjižnice (IEC 62714-2:2015)

Niz standardov IEC 62714 določa obliko izmenjave tehničnih podatkov za uporabo v industrijskem inženiringu avtomatizacije sistemov.
Ta del standarda IEC 62714 določa normative in informativne vloge razreda knjižnice AML za oblikovanje inženirskih podatkov za izmenjavo med inženirskimi orodji na območju avtomatiziranega obrata s pomočjo AML. Ob tem kot primer predstavlja dodatne uporabniško določene knjižnice. Določbe standarda se uporabljajo za izvozne/uvozne aplikacije povezanih orodij. Ta del standarda IEC 62714 ne določa podrobnosti postopka izmenjave podatkov ali implementacijskih zahtev za uvozna/izvozna orodja.

General Information

Status
Published
Publication Date
26-Jul-2015
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-May-2015
Due Date
27-Jul-2015
Completion Date
27-Jul-2015

Relations

Buy Standard

Standard
EN 62714-2:2015 - BARVE
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62714-2:2015
01-september-2015
2EOLNDL]PHQMDYHWHKQLþQLKSRGDWNRY]DXSRUDERYLQGXVWULMVNHPLQåHQLULQJX
DYWRPDWL]DFLMHVLVWHPRY2]QDþHYDOQLMH]LN]DDYWRPDWL]DFLMRGHO9ORJD
UD]UHGDNQMLåQLFH ,(&
Engineering Data Exchange format for use in industrial automation systems engineering
- Automation Markup Language - Part 2: Role class libraries (IEC 62714-2:2015)
Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme -
Automation markup language – Teil 2: Rollenbibliotheken (IEC 62714-2:2015)
Format d'échange de données techniques pour une utilisation dans l'ingénierie des
systèmes d'automatisation industrielle - Automation markup language - Partie 2:
Bibliothèques de classes de rôles (IEC 62714-2:2015)
Ta slovenski standard je istoveten z: EN 62714-2:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.060 Jeziki, ki se uporabljajo v Languages used in
informacijski tehniki in information technology
tehnologiji
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62714-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62714-2:2015

---------------------- Page: 2 ----------------------

SIST EN 62714-2:2015


EUROPEAN STANDARD EN 62714-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 25.040.40; 35.060; 35.240.50

English Version
Engineering data exchange format for use in industrial
automation systems engineering - Automation markup
language - Part 2: Role class libraries
(IEC 62714-2:2015)
Format d'échange de données techniques pour une Datenaustauschformat für Planungsdaten industrieller
utilisation dans l'ingénierie des systèmes d'automatisation Automatisierungssysteme - Automation markup language -
industrielle - Automation markup language - Partie 2: Teil 2: Rollenbibliotheken
Bibliothèques de classes de rôles (IEC 62714-2:2015)
(IEC 62714-2:2015)
This European Standard was approved by CENELEC on 2015-05-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62714-2:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62714-2:2015
EN 62714-2:2015 - 2 -
Foreword
The text of document 65E/300/CDV, future edition 1 of IEC 62714-2, prepared by SC 65E "Devices
and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62714-2:2015.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-02-04
national level by publication of an identical national
standard or by endorsement
(dow) 2018-05-04
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62714-2:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61512-1 NOTE Harmonized as EN 61512-1.
IEC 62264-1:2013 NOTE Harmonized as EN 62264-1:2013 (not modified).

---------------------- Page: 4 ----------------------

SIST EN 62714-2:2015
- 3 - EN 62714-2:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61360-4 -  Standard data element types with EN 61360-4 -
associated classification scheme for electric
components -
Part 4: IEC reference collection of standard
data element types and component classes
IEC 62424 2008 Representation of process control EN 62424 2009
engineering - Requests in P&I diagrams and
data exchange between P&ID tools and
PCE-CAE tools
IEC 62714-1 2014 Engineering data exchange format for use in EN 62714-1 2014
industrial automation systems engineering -
Automation markup language -
Part 1: Architecture and general
requirements

---------------------- Page: 5 ----------------------

SIST EN 62714-2:2015

---------------------- Page: 6 ----------------------

SIST EN 62714-2:2015




IEC 62714-2

®


Edition 1.0 2015-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Engineering data exchange format for use in industrial automation systems

engineering – Automation markup language –

Part 2: Role class libraries




Format d'échange de données techniques pour une utilisation dans l'ingénierie

des systèmes d'automatisation industrielle – Automation markup language –


Partie 2: Bibliothèques de classes de rôles













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 25.040.40; 35.06; 35.240.50 ISBN 978-2-8322-2407-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62714-2:2015
– 2 – IEC 62714-2:2015 © IEC 2015
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 11
2 Normative references . 11
3 Terms, definitions and abbreviations . 11
3.1 Terms and definitions . 11
3.2 Abbreviations . 12
4 Conformity . 12
5 AML role classes . 13
5.1 Structure and references . 13
5.2 AML role class library for discrete manufacturing industry –
AutomationMLDMIRoleClassLib . 14
5.2.1 General . 14
5.2.2 RoleClass DiscManufacturingEquipment . 15
5.2.3 RoleClass Transport . 16
5.2.4 RoleClass Storage . 16
5.2.5 RoleClass Fixture . 16
5.2.6 RoleClass Gate . 16
5.2.7 RoleClass Robot . 17
5.2.8 RoleClass Tool . 17
5.2.9 RoleClass Carrier . 17
5.2.10 RoleClass Machine . 17
5.2.11 RoleClass StaticObject . 18
5.3 AML role class library for continuous manufacturing industry –
AutomationMLCMIRoleClassLib . 18
5.3.1 General . 18
5.3.2 RoleClass ContManufacturingEquipment . 19
5.4 AML role class library for batch manufacturing industry –
AutomationMLBMIRoleClassLib . 19
5.4.1 General . 19
5.4.2 RoleClass BatchManufacturingEquipment . 20
5.5 AML role class library for control systems – AutomationMLCSRoleClassLib . 20
5.5.1 General . 20
5.5.2 RoleClass ControlEquipment . 21
5.5.3 RoleClass Communication . 22
5.5.4 RoleClass ControlHardware . 22
5.5.5 RoleClass PC . 22
5.5.6 RoleClass IPC . 22
5.5.7 RoleClass Handheld . 22
5.5.8 RoleClass EmbeddedDevice . 23
5.5.9 RoleClass Sensor . 23
5.5.10 RoleClass Actuator . 23
5.5.11 RoleClass Controller . 23
5.5.12 RoleClass PLC . 24
5.5.13 RoleClass NC . 24
5.5.14 RoleClass RC . 24

---------------------- Page: 8 ----------------------

SIST EN 62714-2:2015
IEC 62714-2:2015 © IEC 2015 – 3 –
5.5.15 RoleClass PAC . 24
Annex A (informative) AML extended role class library . 25
A.1 General . 25
A.2 RoleClass PLCFacet . 26
A.3 RoleClass HMIFacet . 27
A.4 RoleClass Enterprise . 27
A.5 RoleClass Site . 28
A.6 RoleClass Area . 28
A.7 RoleClass ProductionLine . 29
A.8 RoleClass WorkCell . 29
A.9 RoleClass ProcessCell . 29
A.10 RoleClass Unit . 30
A.11 RoleClass ProductionUnit . 30
A.12 RoleClass StorageZone . 30
A.13 RoleClass StorageUnit . 31
A.14 RoleClass Turntable . 31
A.15 RoleClass Conveyor . 31
A.16 RoleClass BeltConveyor . 32
A.17 RoleClass RollConveyor . 32
A.18 RoleClass ChainConveyor . 32
A.19 RoleClass PalletConveyor . 32
A.20 RoleClass OverheadConveyor . 33
A.21 RoleClass LiftingTable . 33
A.22 RoleClass AGV . 33
A.23 RoleClass Transposer . 33
A.24 RoleClass CarrierHandlingSystem . 34
A.25 RoleClass BodyStore . 34
A.26 RoleClass Lift . 34
A.27 RoleClass Rollerbed . 34
A.28 RoleClass StationaryTool . 35
A.29 RoleClass MovableTool . 35
A.30 RoleClass ControlCabinet . 35
A.31 RoleClass IODevice . 35
A.32 RoleClass HMI . 36
A.33 RoleClass WarningEquipment . 36
A.34 RoleClass ActuatingDrive . 36
A.35 RoleClass MotionController . 36
A.36 RoleClass Panel . 37
A.37 RoleClass MeasuringEquipment. 37
A.38 RoleClass Clamp . 37
A.39 RoleClass ProcessController . 37
A.40 RoleClass Loader . 38
A.41 RoleClass Unloader . 38
Annex B (informative) Examples of usage of RoleClasses . 39
B.1 General . 39
B.2 Example plant unit . 39
Annex C (informative) User-defined RoleClass libraries . 44
C.1 General . 44
C.2 External semantics of attributes . 45

---------------------- Page: 9 ----------------------

SIST EN 62714-2:2015
– 4 – IEC 62714-2:2015 © IEC 2015
Annex D (informative) XML representation of AML libraries . 46
D.1 AutomationMLDMIRoleClassLib . 46
D.2 AutomationMLCMIRoleClassLib . 46
D.3 AutomationMLBMIRoleClassLib . 47
D.4 AutomationMLCSRoleClassLib . 47
D.5 AutomationMLExtendedRoleClassLib . 48
Bibliography . 51

Figure 1 – Overview of the engineering data exchange format (AML) . 9
Figure 2 – AutomationMLBaseRoleClassLib defined in IEC 62714-1:2014 . 13
Figure 3 – AutomationMLDMIRoleClassLib . 15
Figure 4 – XML grid of the AutomationMLDMIRoleClassLib. 15
Figure 5 – XML text of the AutomationMLDMIRoleClassLib . 15
Figure 6 – AutomationMLCMIRoleClassLib . 18
Figure 7 – XML grid of the AutomationMLCMIRoleClassLib. 18
Figure 8 – XML text of the AutomationMLCMIRoleClassLib . 19
Figure 9 – AutomationMLBMIRoleClassLib . 19
Figure 10 – XML grid of the AutomationMLBMIRoleClassLib . 19
Figure 11 – XML text of the AutomationMLBMIRoleClassLib . 19
Figure 12 – AutomationMLCSRoleClassLib . 20
Figure 13 – XML grid of the AutomationMLCSRoleClassLib . 21
Figure 14 – XML text of the AutomationMLCSRoleClassLib . 21
Figure A.1 – AutomationMLExtendedRoleClassLib . 26
Figure A.2 – Resource structure [SOURCE: IEC 62264-1:2013] . 28
Figure B.1 – Usage of roles in the mapping process . 39
Figure B.2 – Example for usage of roles . 40
Figure B.3 – Example AML model . 40
Figure B.4 – Example InstanceHierarchy for usage of roles . 41
Figure B.5 – XML grid of the example InstanceHierarchy for usage of roles . 41
Figure B.6 – XML text of the example InstanceHierarchy for usage of roles . 41
Figure B.7 – External RoleClassLib reference . 42
Figure B.8 – Usage of external role class in example . 42
Figure B.9 – Example SystemUnitClass library for usage of roles . 43
Figure B.10 – XML grid of the example SystemUnitClass library for usage of roles . 43
Figure B.11 – XML text of the example SystemUnitClass library for usage of roles . 43
Figure C.1 – AML user-defined RoleClassLib FoodAndBeverage . 44
Figure C.2 – Example for external attribute semantics . 45

Table 1 – Abbreviations . 12
Table 2 – Structure of AML role class libraries . 13
Table 3 – RoleClass DiscManufacturingEquipment . 16
Table 4 – RoleClass Transport . 16
Table 5 – RoleClass Storage . 16
Table 6 – RoleClass Fixture . 16

---------------------- Page: 10 ----------------------

SIST EN 62714-2:2015
IEC 62714-2:2015 © IEC 2015 – 5 –
Table 7 – RoleClass Gate . 17
Table 8 – RoleClass Robot . 17
Table 9 – RoleClass Tool . 17
Table 10 – RoleClass Carrier . 17
Table 11 – RoleClass Machine . 18
Table 12 – RoleClass StaticObject . 18
Table 13 – RoleClass ContManufacturingEquipment . 19
Table 14 – RoleClass BatchManufacturingEquipment . 20
Table 15 – RoleClass ControlEquipment . 21
Table 16 – RoleClass Communication . 22
Table 17 – RoleClass ControlHardware . 22
Table 18 – RoleClass PC . 22
Table 19 – RoleClass IPC . 22
Table 20 – RoleClass Handheld . 23
Table 21 – RoleClass EmbeddedDevice . 23
Table 22 – RoleClass Sensor . 23
Table 23 – RoleClass Actuator . 23
Table 24 – RoleClass Controller . 23
Table 25 – RoleClass PLC . 24
Table 26 – RoleClass NC . 24
Table 27 – RoleClass RC . 24
Table 28 – RoleClass PAC . 24
Table A.1 – RoleClass PLCFacet . 27
Table A.2 – RoleClass HMIFacet . 27
Table A.3 – RoleClass Enterprise . 27
Table A.4 – RoleClass Site . 28
Table A.5 – RoleClass Area . 29
Table A.6 – RoleClass ProductionLine . 29
Table A.7 – RoleClass WorkCell . 29
Table A.8 – RoleClass ProcessCell . 30
Table A.9 – RoleClass Unit . 30
Table A.10 – RoleClass ProductionUnit. 30
Table A.11 – RoleClass StorageZone . 31
Table A.12 – RoleClass StorageUnit . 31
Table A.13 – RoleClass Turntable . 31
Table A.14 – RoleClass Conveyor . 32
Table A.15 – RoleClass BeltConveyor . 32
Table A.16 – RoleClass RollConveyor . 32
Table A.17 – RoleClass ChainConveyor . 32
Table A.18 – RoleClass PalletConveyor . 33
Table A.19 – RoleClass OverheadConveyor . 33
Table A.20 – RoleClass LiftingTable . 33
Table A.21 – RoleClass AGV . 33

---------------------- Page: 11 ----------------------

SIST EN 62714-2:2015
– 6 – IEC 62714-2:2015 © IEC 2015
Table A.22 – RoleClass Transposer . 34
Table A.23 – RoleClass CarrierHandlingSystem. 34
Table A.24 – RoleClass BodyS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.