SIST EN ISO 12777-1:1998/A1:2009

SLOVENSKI STANDARD
SIST EN ISO 12777-1:1998/A1:2009
01-marec-2009
Preskusne metode tovora na paleti - 1. del: Ugotavljanje trdnosti povezovanja
paletnih žebljev in drugih povezovalcev ter trakov - Dopolnilo A1 (ISO 12777-
1:1994/Amd 1:2008)
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet
nails, other dowel-type fasteners and staples - Amendment 1 (ISO 12777-1:1994/Amd
1:2008)
Prüfungen von Verbindungen an Paletten - Teil 1: Bestimmung der Biegefestigkeit von
Palettennägeln, Klammern und anderen dübelartigen Verbindungselementen (ISO 12777
-1:1994/Amd 1:2008)
Méthodes d'essai des assemblages de palettes - Partie 1: Détermination de la résistance
à la flexion des clous et autres éléments de fixation de type cheville, et des clous
cavaliers - Amendement 1 (ISO 12777-1:1994/Amd 1:2008)
Ta slovenski standard je istoveten z: EN ISO 12777-1:1996/A1:2008
ICS:
21.060.50 =DWLþLåHEOML Pins, nails
55.180.20 9HþQDPHQVNHSDOHWH General purpose pallets
SIST EN ISO 12777-1:1998/A1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12777-1:1998/A1:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 12777-1:1998/A1:2009
EUROPEAN STANDARD
EN ISO 12777-1:1996/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 55.180.20

English Version
Methods of test for pallet joints - Part 1: Determination of
bending resistance of pallet nails, other dowel-type fasteners
and staples - Amendment 1 (ISO 12777-1:1994/Amd 1:2008)
Méthodes d'essai des assemblages de palettes - Partie 1: Prüfungen von Verbindungen an Paletten - Teil 1:
Détermination de la résistance à la flexion des clous et Bestimmung der Biegefestigkeit von Palettennägeln,
autres éléments de fixation de type cheville, et des clous Klammern und anderen dübelartigen
cavaliers - Amendement 1 (ISO 12777-1:1994/Amd 1:2008) Verbindungselementen - Änderung 1 (ISO 12777-
1:1994/Amd 1:2008)
This amendment A1 modifies the European Standard EN ISO 12777-1:1996; it was approved by CEN on 15 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12777-1:1996/A1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12777-1:1998/A1:2009
EN ISO 12777-1:1996/A1:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12777-1:1998/A1:2009
EN ISO 12777-1:1996/A1:2008 (E)
Foreword
This document (EN ISO 12777-1:1996/A1:2008) has been prepared by Technical Committee ISO/TC 51
“Pallets for unit load method of materials handling" in collaboration with Technical Committee CEN/TC 261
“Packaging", the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 12777:1996 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and
conflicting national standards shall be withdrawn at the latest by May 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
...