Alpine skis - Determination of deformation load and breaking load

This International Standard specifies a method for determining the resistance of alpine skis to permanent
deformation and breaking. In this International Standard no attempt is made to relate the measurement
data to the quality of the ski.
lt is applicable to all alpine skis for adults, juveniles and children.

Skis alpins -- Détermination de la charge de déformation et de la charge de rupture

L'ISO 6265:2013 sp�cifie une m�thode de d�termination de la r�sistance des skis alpins � la d�formation permanente et � la rupture. La pr�sente Norme internationale n'a pas pour but d'estimer l'influence des valeurs obtenues sur la qualit� du ski. Elle est applicable � tous les skis alpins, pour adultes, adolescents et enfants.

Alpske smuči - Določevanje deformacijske in zlomne sile

Ta mednarodni standard določa metodo za določevanje odpornosti alpskih smuči na trajne deformacije in zlomno silo. Ta mednarodni standard na noben način ne opredeljuje povezovanja merilnih podatkov s kakovostjo smuči.
Uporablja se za vse alpske smuči za odrasle, mladostnike in otroke.

General Information

Status
Published
Public Enquiry End Date
14-Sep-2017
Publication Date
14-Sep-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Sep-2017
Due Date
20-Nov-2017
Completion Date
15-Sep-2017

Relations

Buy Standard

Standard
ISO 6265:2013 - Alpine skis -- Determination of deformation load and breaking load
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6265:2017
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 6265:2017
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 6265:2013 - Skis alpins -- Détermination de la charge de déformation et de la charge de rupture
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6265
Third edition
2013-03-01
Alpine skis — Determination of
deformation load and breaking load
Skis alpins — Détermination de la charge de déformation et de la
charge de rupture
Reference number
ISO 6265:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 6265:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6265:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Testing machine . 1
5 Determination of the load application point . 3
6 Conditioning . 4
7 Test procedure . 4
8 Evaluation . 4
8.1 Deformation load . 4
8.2 Breaking load . 4
9 Test report . 4
© ISO 2013 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 6265:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6265 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 4, Snowsports equipment.
This third edition cancels and replaces the second edition (ISO 6265:1992), which has been
technically revised.
iv © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 6265:2013(E)
Alpine skis — Determination of deformation load
...

SLOVENSKI STANDARD
oSIST ISO 6265:2017
01-september-2017
$OSVNHVPXþL'RORþHYDQMHGHIRUPDFLMVNHLQ]ORPQHVLOH
Alpine skis - Determination of deformation load and breaking load
Skis alpins -- Détermination de la charge de déformation et de la charge de rupture
Ta slovenski standard je istoveten z: ISO 6265:2013
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
oSIST ISO 6265:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

oSIST ISO 6265:2017

---------------------- Page: 2 ----------------------

oSIST ISO 6265:2017
INTERNATIONAL ISO
STANDARD 6265
Third edition
2013-03-01
Alpine skis — Determination of
deformation load and breaking load
Skis alpins — Détermination de la charge de déformation et de la
charge de rupture
Reference number
ISO 6265:2013(E)
©
ISO 2013

---------------------- Page: 3 ----------------------

oSIST ISO 6265:2017
ISO 6265:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------

oSIST ISO 6265:2017
ISO 6265:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Testing machine . 1
5 Determination of the load application point . 3
6 Conditioning . 4
7 Test procedure . 4
8 Evaluation . 4
8.1 Deformation load . 4
8.2 Breaking load . 4
9 Test report . 4
© ISO 2013 – All rights reserved iii

---------------------- Page: 5 ----------------------

oSIST ISO 6265:2017
ISO 6265:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6265 was prepared by Technical Committee ISO/TC 83, Spo
...

SLOVENSKI STANDARD
SIST ISO 6265:2017
01-oktober-2017
1DGRPHãþD
SIST ISO 6265:1995
$OSVNHVPXþL'RORþHYDQMHGHIRUPDFLMVNHLQ]ORPQHVLOH
Alpine skis - Determination of deformation load and breaking load
Skis alpins -- Détermination de la charge de déformation et de la charge de rupture
Ta slovenski standard je istoveten z: ISO 6265:2013
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
SIST ISO 6265:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 6265:2017

---------------------- Page: 2 ----------------------

SIST ISO 6265:2017
INTERNATIONAL ISO
STANDARD 6265
Third edition
2013-03-01
Alpine skis — Determination of
deformation load and breaking load
Skis alpins — Détermination de la charge de déformation et de la
charge de rupture
Reference number
ISO 6265:2013(E)
©
ISO 2013

---------------------- Page: 3 ----------------------

SIST ISO 6265:2017
ISO 6265:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 6265:2017
ISO 6265:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Testing machine . 1
5 Determination of the load application point . 3
6 Conditioning . 4
7 Test procedure . 4
8 Evaluation . 4
8.1 Deformation load . 4
8.2 Breaking load . 4
9 Test report . 4
© ISO 2013 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 6265:2017
ISO 6265:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6265 was prepared by Technic
...

NORME ISO
INTERNATIONALE 6265
Troisième édition
2013-03-01
Skis alpins — Détermination de
la charge de déformation et de la
charge de rupture
Alpine skis — Determination of deformation load and breaking load
Numéro de référence
ISO 6265:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 6265:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6265:2013(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Machine d’essai . 1
5 Détermination du point d’application de la charge . 3
6 Conditionnement . 4
7 Mode opératoire. 4
8 Évaluation . 4
8.1 Charge de déformation . 4
8.2 Charge de rupture . 4
9 Rapport d’essai . 4
© ISO 2013 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 6265:2013(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives
ISO/CEI, Partie 2.
La tâche principale des comités techniques est d’élaborer les Normes internationales. Les projets de
Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour vote.
Leur publication comme Normes internationales requiert l’approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L’ISO 6265 a été élaborée par le comité technique ISO/TC 83, Matériel de sports et d’activités de plein air,
sous-comité SC 4, Équipements de sport de neige.
Cette troisième édition annule et remplace la deuxième édition (ISO 6265:1992), qui a fait l’objet d’une
révision technique.
iv © ISO 2013 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 6265:2013(F)
Skis alpins — Détermination de la charge de déformation
et de la charge de rupture
1 Domaine d’application
La présente Norme internationale spécifie une méthode de détermination de la résistance des skis
alpins à la déformation permanente et à la rupture. La présente Norme internationale n’a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.