SIST EN 2883:2009
(Main)Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
This standard specifies the characteristics of self-locking hexagonal nuts, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1 100 MPa 1) / 315 °C.
Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C
Diese Norm legt die Eigenschaften von selbstsichernden Sechskantmuttern mit zylindrischer Aussenkung und
Bördelscheibe, aus hochwarmfestem Stahl, MoS2-geschmiert, fest.
Klasse: 1 100 MPa1)/315 °C2)
Série aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier résistant à chaud, lubrifiés MoS2 - Classification: 1 100 MPa (à température ambiante) / 315 °C
Aeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko, iz toplotnoodpornega jekla, namazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko, iz toplotnoodpornega jekla, namazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °CLuft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °CSérie aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier résistant à chaud, lubrifiés MoS2 - Classification: 1 100 MPa (à température ambiante) / 315 °CAerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 2883:2009SIST EN 2883:2009en,de01-oktober-2009SIST EN 2883:2009SLOVENSKI
STANDARD
SIST EN 2883:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2883
July 2009 ICS 49.030.20 English Version
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Série aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier résistant à chaud, lubrifiés MoS2 - Classification: 1 100 MPa (à température ambiante) / 315 °C
Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C This European Standard was approved by CEN on 6 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2883:2009: ESIST EN 2883:2009
EN 2883:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Required characteristics .4 4 Designation .6 5 Marking .6 6 Technical specification .6
SIST EN 2883:2009
EN 2883:2009 (E) 3 Foreword This document (EN 2883:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.