Slotted cheese head screws - Product grade A (ISO 1207:2011)

This International Standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1, ISO 4759-1.

Zylinderschrauben mit Schlitz - Produktklasse A (ISO 1207:2011)

Die vorliegende Internationale Norm legt die Eigenschaften von Zylinderschrauben mit Schlitz, Produktklasse
A und mit Gewindegrößen von M1,6 bis einschließlich M10 fest.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm
aufgeführten benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z. B. ISO 261,
ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 und ISO 4759-1.

Vis à métaux à tête cylindrique fendue - Grade A (ISO 1207:2011)

ISO 1207:2011 spécifie les caractéristiques des vis à métaux à tête cylindrique fendue et de grade A, de diamètre de filetage M1,6 à M10 inclus.

Vijaki z zarezano valjasto glavo - Razred izdelave A (ISO 1207:2011)

Ta mednarodni standard določa značilnosti vijakov z zarezano valjasto glavo razreda izdelave A in z navoji od M1,6 do vključno M10. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 in ISO 4759-1.

General Information

Status
Published
Public Enquiry End Date
24-Mar-2010
Publication Date
13-Sep-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-Aug-2011
Due Date
05-Nov-2011
Completion Date
14-Sep-2011

Relations

Buy Standard

Standard
EN ISO 1207:2011
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 1207:2010
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1207:2011
01-oktober-2011
1DGRPHãþD
SIST EN ISO 1207:1996
Vijaki z zarezano valjasto glavo - Razred izdelave A (ISO 1207:2011)
Slotted cheese head screws - Product grade A (ISO 1207:2011)
Zylinderschrauben mit Schlitz - Produktklasse A (ISO 1207:2011)
Vis à métaux à tête cylindrique fendue - Grade A (ISO 1207:2011)
Ta slovenski standard je istoveten z: EN ISO 1207:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 1207:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1207:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 1207:2011


EUROPEAN STANDARD
EN ISO 1207

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2011
ICS 21.060.10 Supersedes EN ISO 1207:1994
English Version
Slotted cheese head screws - Product grade A (ISO 1207:2011)
Vis à métaux à tête cylindrique fendue - Grade A (ISO Zylinderschrauben mit Schlitz - Produktklasse A (ISO
1207:2011) 1207:2011)
This European Standard was approved by CEN on 1 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1207:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1207:2011
EN ISO 1207:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1207:2011
EN ISO 1207:2011 (E)
Foreword
This document (EN ISO 1207:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1207:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1207:2011 has been approved by CEN as a EN ISO 1207:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1207:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 1207:2011

INTERNATIONAL ISO
STANDARD 1207
Third edition
2011-08-01


Slotted cheese head screws — Product
grade A
Vis à métaux à tête cylindrique fendue — Grade A




Reference number
ISO 1207:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 1207:2011
ISO 1207:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 1207:2011
ISO 1207:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1207 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with
metric external thread.
This third edition cancels and replaces the second edition (ISO 1207:1992), which has been technically
revised.

© ISO 2011 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 1207:2011

---------------------- Page: 10 -----
...

SLOVENSKI STANDARD
oSIST prEN ISO 1207:2010
01-marec-2010
Vijaki z zarezano valjasto glavo - Razred izdelave A (ISO/DIS 1207:2009)
Slotted cheese head screws - Product grade A (ISO/DIS 1207:2009)
Zylinderschrauben mit Schlitz - Produktklasse A (ISO/DIS 1207:2009)
Vis à métaux à tête cylindrique fendue - Grade A (ISO/DIS 1207:2009)
Ta slovenski standard je istoveten z: prEN ISO 1207
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN ISO 1207:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1207:2010

---------------------- Page: 2 ----------------------
oSIST prEN ISO 1207:2010


EUROPEAN STANDARD
DRAFT
prEN ISO 1207
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2009
ICS 21.060.10 Will supersede EN ISO 1207:1994
English Version
Slotted cheese head screws - Product grade A (ISO/DIS
1207:2009)
Vis à métaux à tête cylindrique fendue - Grade A (ISO/DIS Zylinderschrauben mit Schlitz - Produktklasse A (ISO/DIS
1207:2009) 1207:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 185.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 1207:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 1207:2010
prEN ISO 1207:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 1207:2010
prEN ISO 1207:2009 (E)
Foreword
This document (prEN ISO 1207:2009) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 1207:1994.
Endorsement notice
The text of ISO/DIS 1207:2009 has been approved by CEN as a prEN ISO 1207:2009 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 1207:2010

---------------------- Page: 6 ----------------------
oSIST prEN ISO 1207:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 1207
ISO/TC 2/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2009-11-19 2010-04-19
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Slotted cheese head screws — Product grade A
Vis à métaux à tête cylindrique fendue — Grade A
[Revision of third edition (ISO 1207:1992)]
ICS 21.060.10

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2009

---------------------- Page: 7 ----------------------
oSIST prEN ISO 1207:2010
ISO/DIS 1207
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 1207:2010
ISO/DIS 1207
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.