SIST EN ISO 3164:2014

SLOVENSKI STANDARD
SIST EN ISO 3164:2014
01-januar-2014
1DGRPHãþD
SIST EN ISO 3164:2008
6WURML]D]HPHOMVNDGHOD/DERUDWRULMVNRRYUHGQRWHQMH]DãþLWH0HMQRSRGURþMH
GHIRUPDFLMH,62
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications
for deflection-limiting volume (ISO 3164:2013)
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich (ISO
3164:2013)
Engins de terrassement - Étude en laboratoire des structures de protection -
Spécifications pour le volume limite de déformation (ISO 3164:2013)
Ta slovenski standard je istoveten z: EN ISO 3164:2013
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3164:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3164:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 3164:2014


EUROPEAN STANDARD
EN ISO 3164

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2013
ICS 53.100 Supersedes EN ISO 3164:2008
English Version
Earth-moving machinery - Laboratory evaluations of protective
structures - Specifications for deflection-limiting volume (ISO
3164:2013)
Engins de terrassement - Étude en laboratoire des Erdbaumaschinen - Prüfung von Schutzaufbauten -
structures de protection - Spécifications pour le volume Verformungsgrenzbereich (ISO 3164:2013)
limite de déformation (ISO 3164:2013)
This European Standard was approved by CEN on 14 March 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3164:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3164:2014
EN ISO 3164:2013 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3164:2014
EN ISO 3164:2013 (E)
Foreword
This document (EN ISO 3164:2013) has been prepared by Technical Committee ISO/TC 127 "Earth-moving
machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment and building
material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn
at the latest by November 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3164:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3164:2013 has been approved by CEN as EN ISO 3164:2013 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 3164:2014
EN ISO 3164:2013 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements 3.4.3 and 3.4.4 of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this standard.
4

---------------------- Page: 6 ----------------------

SIST EN ISO 3164:2014
INTERNATIONAL ISO
STANDARD 3164
Sixth edition
2013-05-01
Earth-moving machinery —
Laboratory evaluations of protective
structures — Specifications for
deflection-limiting volume
Engins de terrassement — Étude en laboratoire des structures de
protection — Spécifications pour le volume limite de déformation
Reference number
ISO 3164:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 3164:2014
ISO 3164:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3164:2014
ISO 3164:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 1
4 DLV dimensions, use and accuracy . 2
5 Location of DLV .
...