SIST EN ISO 8106:2005
(Main)Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)
Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)
This European standard specifies a gravimetric method for determining the brimful and filling level capacities of glass containers and for determining their compliance with specification limits.
Behältnisse aus Glas - Bestimmung des Volumens nach dem Wägeverfahren - Prüfverfahren (ISO 8106:2004)
Diese Europäische Norm legt ein Wägeverfahren zur Bestimmung des Randvoll- und Füllvollinhalts von Behältnissen aus Glas zur Ermittlung ihrer Übereinstimmung mit festgelegten Grenzen fest.
Récipients en verre - Détermination de la capacité par la méthode gravimétrique - Méthode d'essai (ISO 8106:2004)
La présente Norme Européenne spécifie une méthode gravimétrique permettant de déterminer les capacités a ras bord et au niveau de remplissage des récipients en verre ainsi que leur conformité aux limites spécifiées.
Steklena embalaža – Ugotavljanje prostornine z gravimetrijsko metodo - Preskusna metoda (ISO 8106:2004)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklena embalaža – Ugotavljanje prostornine z gravimetrijsko metodo - Preskusna metoda (ISO 8106:2004)Behältnisse aus Glas - Bestimmung des Volumens nach dem Wägeverfahren - Prüfverfahren (ISO 8106:2004)Récipients en verre - Détermination de la capacité par la méthode gravimétrique - Méthode d'essai (ISO 8106:2004)Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN ISO 8106:2004SIST EN ISO 8106:2005en,fr,de01-marec-2005SIST EN ISO 8106:2005SLOVENSKI
STANDARD
SIST EN ISO 8106:2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8106November 2004ICS 55.100 English versionGlass containers - Determination of capacity by gravimetricmethod - Test method (ISO 8106:2004)Récipients en verre - Détermination de la capacité par laméthode gravimétrique - Méthode d'essai (ISO 8106:2004)Behältnisse aus Glas - Bestimmung des Volumens nachdem Wägeverfahren - Prüfverfahren (ISO 8106:2004)This European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8106:2004: ESIST EN ISO 8106:2005
EN ISO 8106:2004 (E) 2 Contents
page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Sampling.4 6 Apparatus.4 7 Procedure.5 8 Expression of results.5 9 Test report.6 Bibliography.8
SIST EN ISO 8106:2005
EN ISO 8106:2004 (E) 3 Foreword This document (EN ISO 8106:2004) has been prepared by Technical Committee CEN /TC 261, "Packaging", the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 "Glass containers". This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document includes a Bibliography. Efficient packaging is of great importance for the distribution and the protection of goods and the environment. Insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack. This standard is part of a series of standards for "Glass containers - Test methods": EN ISO 7458, Glass containers — Internal pressure resistance — Test methods (ISO 7458:2004) EN ISO 7459, Glass containers — Thermal shock resistance and thermal shock endurance — Test methods (ISO 7459:2004) EN ISO 8106, Glass containers — Determination of capacity by gravimetric method — Test method (ISO 8106:2004) EN ISO 8113, Glass containers — Resistance to vertical load — Test method (ISO 8113:2003) EN 29008, Glass bottles — Verticality — Test method (ISO 9008:1991) EN 29009, Glass containers — Height and non-parallelism of finish with reference to container base — Test methods (ISO 9009:1991) EN 29885, Wide-mouth glass containers — Deviation from flatness of top sealing surface — Test methods (ISO 9885:1991) According to the CE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.