SIST EN 62300:2006

SLOVENSKI STANDARD
SIST EN 62300:2006
01-januar-2006
'LJLWDOQLYPHVQLN]DSRUDEQLãNRDYGLRYLGHRRSUHPRL]SODVWLþQLKRSWLþQLKYODNHQ
,(&
Consumer audio/video equipment digital interface with plastic optical fibre
Audio-/Video-Geräte für den Allgemeingebrauch - Digitale Schnittstelle mit Kunststoff-
Lichtleitfaser
Interface numérique avec une fibre optique plastique pour équipements audio/vidéo
grand public
Ta slovenski standard je istoveten z: EN 62300:2005
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62300:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62300:2006

---------------------- Page: 2 ----------------------

SIST EN 62300:2006
EUROPEAN STANDARD EN 62300
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2005

ICS 33.160.99; 33.180.20


English version


Consumer audio/video equipment digital interface
with plastic optical fibre
(IEC 62300:2004)


Interface numérique avec une fibre Audio-/Video-Geräte
optique plastique pour équipements für den Allgemeingebrauch –
audio/vidéo grand public Digitale Schnittstelle mit Kunststoff-
(CEI 62300:2004) Lichtleitfaser
(IEC 62300:2004)



This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62300:2005 E

---------------------- Page: 3 ----------------------

SIST EN 62300:2006
EN 62300:2005 - 2 -
Foreword
The text of document 100/840/FDIS, future edition 1 of IEC 62300, prepared by IEC TC 100, Audio,
video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 62300 on 2004-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62300:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62300:2006
- 3 - EN 62300:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV)
Chapter 731: Optical fibre communication

1)
2)
IEC 60793-2-40 - Optical fibres EN 60793-2-40 2002
Part 2-40: Product specifications -
Sectional specification for category A4
multimode fibres

- 1) 2)
IEC 60825-1 Safety of laser products EN 60825-1 1994
Part 1: Equipment classification,
requirements and user's guide

- 1) 2)
IEC 60825-2 Part 2: Safety of optical fibre EN 60825-2 2004
communication systems (OFCS)

3)
IEC 61754-21 - Fibre optic connector interfaces - -
Part 21: Type SMI connector family for
plastic optical fibre




1)
Undated reference.
2)
Valid edition at date of issue.
3)
To be published.

---------------------- Page: 5 ----------------------

SIST EN 62300:2006

---------------------- Page: 6 ----------------------

SIST EN 62300:2006


INTERNATIONAL IEC


STANDARD 62300





First edition
2004-11


Consumer audio/video equipment digital interface
with plastic optical fibre

 IEC 2004  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale M
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 62300:2006
– 2 – 62300 © IEC:2004(E)
CONTENTS

FOREWORD.3

1 Scope.5
2 Normative references .5
3 Terms, definitions and abbreviations .5
3.1 Terms and definitions .5
3.2 Abbreviations .5
4 System consideration .6
4.1 Area of application .6
4.2 Operating environment .6
5 Configuration of digital interface and characteristics to be specified .6
5.1 Configuration of digital interface .6
5.2 Characteristics of electrical interface.6
5.3 Characteristics of optical interface.7
6 Safety aspects.7

Annex A (normative) Wide-band POF .8
A.1 Introduction .8
A.2 Physical dimension.8
A.3 Characteristics .8
Annex B (normative) Optical connector .9
B.1 Introduction .9
B.2 Physical dimension.9
B.3 Characteristics .10
Annex C (informative) Interface applications .11
C.1 Principal features .11
C.2 Connection between D-VCR and TV.11
C.3 Connection between a CD player and an audio amplifier .12

Bibliography.13

---------------------- Page: 8 ----------------------

SIST EN 62300:2006
62300 © IEC:2004(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE
WITH PLASTIC OPTICAL FIBRE


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
...