Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment

Revision of EN 301 489-10 to include the U.K. and Irish national variants of CT1 cordless telephones.  This standard has one common requirements part plus specific parts for each of the radio equipment and services.  This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive.  This does not include EMC requirements for equipment covered by the Marine Equipment Directive.

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 10. del: Posebni pogoji za prvo (CT1 in CT1+) in drugo generacijo brezvrvične telefonske opreme (CT2)

General Information

Status
Published
Publication Date
28-Feb-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2003
Due Date
01-Mar-2003
Completion Date
01-Mar-2003
Mandate

Relations

Buy Standard

Standard
EN 301 489-10 V1.3.1:2003
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]YUYLþQHElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in general33.050.10Telefonska opremaTelephone equipmentICS:Ta slovenski standard je istoveten z:EN 301 489-10 Version 1.3.1SIST EN 301 489-10 V1.3.1:2003en01-marec-2003SIST EN 301 489-10 V1.3.1:2003SLOVENSKI
STANDARD



SIST EN 301 489-10 V1.3.1:2003



ETSI EN 301 489-10 V1.3.1 (2002-08)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC)standard for radio equipment and services;Part 10: Specific conditions for First (CT1 and CT1+) andSecond Generation Cordless Telephone (CT2) equipment
SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 2
Reference REN/ERM-EMC-230-10 Keywords CT, CT2, EMC, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 3
Contents Intellectual Property Rights.5 Foreword.5 1 Scope.6 2 References.6 3 Definitions and abbreviations.7 3.1 Definitions.7 3.2 Abbreviations.7 4 Test conditions.8 4.1 General.8 4.2 Arrangements for test signals.8 4.2.1 Arrangements for test signals at the input of transmitters.8 4.2.1.1 Speech equipment.8 4.2.1.2 Non-speech equipment.8 4.2.2 Arrangements for test signals at the output of transmitters.8 4.2.3 Arrangements for test signals at the input of receivers.8 4.2.4 Arrangements for test signals at the output of receivers.8 4.2.5 Arrangements for testing transmitter and receiver together (as a system).8 4.3 Exclusion bands.9 4.3.1 CT2 equipment.9 4.3.2 CT1 and CT1+ equipment.9 4.4 Narrow band responses on receivers or receivers which are part of transceivers.9 4.4.1 Identification criteria for speech equipment.9 4.4.2 Identification criteria for non-speech equipment.9 4.4.3 Nominal frequency offset used for the identification of narrow band responses.9 4.5 Normal test modulation.9 5 Performance assessment.10 5.1 General.10 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.10 5.2.1 Alternative A: composite equipment.10 5.2.2 Alternative B: use of a test jig and three hosts.10 5.3 Assessment procedures.11 5.3.1 Loss of user control functions or stored user defined data.11 5.3.2 Audio breakthrough.11 5.4 Ancillary equipment.12 5.5 Equipment classification.12 6 Performance criteria.12 6.1 Performance criteria for Continuous phenomena applied to Transmitters (CT).13 6.1.1 Speech equipment.13 6.1.2 Non-speech equipment.13 6.2 Performance criteria for Transient phenomena applied to Transmitters (TT).13 6.3 Performance criteria for Continuous phenomena applied to Receivers (CR).14 6.4 Performance criteria for Transient phenomena applied to Receivers (TR).14 6.5 Performance criteria for ancillary equipment tested on a stand alone basis.14 7 Applicability overview.14 7.1 Emission.14 7.1.1 General.14 7.1.2 Special conditions.14 7.2 Immunity.14 7.2.1 General.14 7.2.2 Special conditions.15 SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 4
Annex A (informative): Definitions of types of Cordless Telephone equipment in the scope of the present document.16 A.1 Second generation Cordless Telephone apparatus (CT2) for operation in the frequency band 864,1 MHz to 868,1 MHz.16 A.2 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 914 MHz to 915 MHz and 959 MHz to 960 MHz.16 A.3 First generation Cordless Telephone apparatus (CT1+) for operation in the frequency band 885 MHz to 887 MHz and 930 MHz to 932 MHz.16 A.4 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 1,6 MHz to 1,7 MHz for base stations (CFP) and 47 MHz for handsets (CPP).17 A.5 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 47 MHz for base stations (CFP) and 77 MHz for handsets (CPP).17 A.6 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 31 MHz for base stations (CFP) and 39 MHz to 40 MHz for handsets (CPP).17 Annex B (informative): Bibliography.18 History.19
SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 5
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [5] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [2]). The present document is part 10 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 9 August 2002 Date of latest announcement of this EN (doa): 30 November 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 May 2003 Date of withdrawal of any conflicting National Standard (dow): 31 May 2004
SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 6
1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of First Generation (CT1 and CT1+) and Second Generation (CT2) Cordless Telephone equipment, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for First Generation (CT1 and CT1+) and Second Generation (CT2) Cordless Telephone equipment, and associated ancillary equipment.
Definitions of types of Cordless Telephone equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. [1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements". [2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [3] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive). [4] ETSI EN 300 176 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Approval test specification". [5] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 7
3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the following apply: CT1 equipment: first generation Cordless Telephone apparatus which includes one or more transceivers and/or receivers and/or parts thereof which operate in the frequency bands detailed in clauses A.2, A.4, A.5, and A.6 of EN 301 489-10 CT1+ equipment: first generation Cordless Telephone apparatus which includes one or more transceivers and/or receivers and/or parts thereof which operate in the frequency bands 885 MHz to 887 MHz and 930 MHz to 932 MHz CT2 equipment: second generation Cordless Telephone apparatus which includes one or more transceivers and/or receivers and/or parts thereof which operate in the frequency band 864,1 MHz to 868,1 MHz host equipment: any equipment which has a complete user functionality when not connected to the cordless telephone or similar radio communications equipment, and to which this radio equipment provides additional functionality, and to which connection is necessary for this radio equipment to offer additional functionality, and in which the transceiver part of the radio equipment is physically installed non-speech equipment: cordless telephone or similar communications equipment intended for the provision and reception of digital data either originating from or destined to external digital speech processing circuitry or other external equipment speech equipment: cordless telephone or similar communications equipment containing transducers such as microphones and/or loudspeakers intended for the provision and reception of acoustic audio signals 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: BER Bit Error Ratio BPF Band Pass Filter BW BandWidth CF Carrier Frequency CFP Cordless Fixed Part
CPP Cordless Portable Part CR Continuous phenomena applied to Receivers
CT Continuous phenomena applied to Transmitters
CT1 Cordless Telephone, first generation CT1+ Cordless Telephone, first generation. Different frequency range from CT1 CT2 Cordless Telephone, second generation ERP Ear Reference Point EUT Equipment Under Test MRP Mouth Reference Point SPL Sound Pressure Level TR Transient phenomena applied to Receivers
TT Transient phenomena applied to Transmitters
SIST EN 301 489-10 V1.3.1:2003



ETSI ETSI EN 301 489-10 V1.3.1 (2002-08) 8
4 Test conditions 4.1 General For the purposes of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate. Further product-related test conditions for cordless telephone or communications equipment are specified in the present document, clauses 4.2 to 4.5. 4.2 Arrangements for test signals The provisions of EN 301 489-1 [1], clause 4.2 shall apply. 4.2.1 Arrangements for test signals at the input of transmitters The provisions of EN 301 489-1 [1], clause 4.2.1 shall apply with the following modification. The transmitter part of the particular type of cordless telephone or communications equipment shall be modulated with normal test modulation as specified for that type of equipment (see clause 4.5). 4.2.1.1 Speech equipment Audio input signals may be provided to the EUT either by a non-metallic acoustic tube or, if provided, electrical connections. The equipment shall not be modified to provide any electrical connection ports for the purposes of EMC tests only. Suitable test arrangements for the acoustic tube are described e.g. in EN 300 176 [4]. 4.2.1.2 Non-speech equipment Digital (data) input signals shall be supplied to the EUT by electrical connection to the modulation input port via an appropriate connecting cable, test jig, or host equipment (see clauses 5.2.1 and 5.2.2). 4.2.2 Arrangements for test signals at the output of transmitters The provisions of EN 301 489-1 [1], clause 4.2.2 shall apply. 4.2.3 Arrangements for test signals at the input of receivers The provisions of EN 301 489-1 [1], clause 4.2.3 shall apply with the following modification. The receiver part or stand alone receiver of the particular type of cordless telephone or communications equipment shall be provided with the appropriate wanted RF signal modulated as specified for that type of equipment
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.