SIST EN IEC 55014-2:2021

SLOVENSKI STANDARD
SIST EN IEC 55014-2:2021
01-junij-2021
Nadomešča:
SIST EN 55014-2:2015
Elektromagnetna združljivost - Zahteve za (električne) gospodinjske aparate,
električna ročna orodja in podobne aparate - 2. del: Odpornost - Standard za
družino izdelkov
Electromagnetic compatibility - Requirements for household appliances, electric tools
and similar apparatus - Part 2: Immunity - Product family standard
Elektromagnetische Verträglichkeit - Anforderungen an Haushaltgeräte,
Elektrowerkzeuge und ähnliche Elektrogeräte - Teil 2: Störfestigkeit -
Produktfamiliennorm
Compatibilité électromagnétique - Exigences relatives aux appareils électrodomestiques,
outillages électriques et appareils analogues - Partie 2: Immunité - Norme de famille de
produits
Ta slovenski standard je istoveten z: EN IEC 55014-2:2021
ICS:
33.100.20 Imunost Immunity
SIST EN IEC 55014-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 55014-2:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 55014-2:2021


EUROPEAN STANDARD EN IEC 55014-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2021
ICS 33.100.20 Supersedes EN 55014-2:2015 and all of its amendments
and corrigenda (if any)
English Version
Electromagnetic compatibility - Requirements for household
appliances, electric tools and similar apparatus - Part 2:
Immunity - Product family standard
(CISPR 14-2:2020)
Compatibilité électromagnétique - Exigences relatives aux Elektromagnetische Verträglichkeit - Anforderungen an
appareils électrodomestiques, outillages électriques et Haushaltgeräte, Elektrowerkzeuge und ähnliche
appareils analogues - Partie 2: Immunité - Norme de famille Elektrogeräte - Teil 2: Störfestigkeit - Produktfamiliennorm
de produits (CISPR 14-2:2020)
(CISPR 14-2:2020)
This European Standard was approved by CENELEC on 2020-10-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 55014-2:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 55014-2:2021
EN IEC 55014-2:2021 (E)
European foreword
The text of document CIS/F/795/FDIS, future edition 3 of CISPR 14-2, prepared by CISPR SC F
"Interference relating to household appliances tools, lighting equipment and similar apparatus" of
CISPR "International special committee on radio interference" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 55014-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-05
document have to be withdrawn
This document supersedes EN 55014-2:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard CISPR 14-2:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60335-1:2010 NOTE Harmonized as EN 60335-1:2012 (modified)
IEC 60335-1:2010/A1:2013 NOTE Harmonized as EN 60335-1:2012/A1:2019 (modified)
IEC 60335-1:2010/A2:2016 NOTE Harmonized as EN 60335-1:2012/A2:2019 (modified)
IEC 61000-6-1:2016 NOTE Harmonized as EN IEC 61000-6-1:2019 (not modified)
IEC 61547 NOTE Harmonized as EN 61547
CISPR 16-2-3:2016 NOTE Harmonized as EN 55016-2-3:2017 (not modified)
CISPR 32:2015 NOTE Harmonized as EN 55032:2015 (not modified)
CISPR 35 NOTE Harmonized as EN 55035
2

---------------------- Page: 4 ----------------------
SIST EN IEC 55014-2:2021
EN IEC 55014-2:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-161 - International Electrotechnical Vocabulary. - -
Chapter 161: Electromagnetic compatibility
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - Part EN 61000-4-2 2009
4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - Part EN 61000-4-3 2006
4-3 : Testing and measurement techniques
- Radiated, radio-frequency,
electromagnetic field immunity test
+ A1 2007 + A1 2008
+ A2 2010 + A2 2010
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - Part EN 61000-4-4 2012
4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity
test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - Part EN 61000-4-5 2014
4-5: Testing and measurement techniques
- Surge immunity test
+ A1 2017 + A1 2017
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - Part EN 61000-4-6 2014
4-6: Testing and measurement techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
3

---------------------- Page: 5 ----------------------
SIST EN IEC 55014-2:2021
EN IEC 55014-2:2021 (E)
Publication Year Title EN/HD Year
IEC 61000-4-11 2020 Electromagnetic compatibility (EMC) - Part EN IEC 61000-4-11 2020
4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests for equipment with input
current up to 16 A per phase
IEC 61000-4-20 2010 Electromagnetic compatibility (EMC) - Part EN 61000-4-20 2010
4-20: Testing and measurement
techniques - Emission and immunity testing
in transverse electromagnetic (TEM)
waveguides
IEC 61000-4-22 2010 Electromagnetic compatibility (EMC) - Part EN 61000-4-22 2011
4-22: Testing and measurement
techniques - Radiated emissions and
immunity measurements in fully anechoic
rooms (FARs)
CISPR 14-1 2020 Electromagnetic compatibility - EN IEC 55014-1 2021
Requirements for household appliances,
electric tools and similar apparatus - Part 1:
Emission

4

---------------------- Page: 6 ----------------------
SIST EN IEC 55014-2:2021



CISPR 14-2

®


Edition 3.0 2020-08




INTERNATIONAL



STANDARD













INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE




PRODUCT FAMILY EMC STANDARD





Electromagnetic compatibility – Requirements for household appliances,

Electric tools and similar apparatus –

Part 2: Immunity – Product family standard






















INTERNATIONAL

ELECTROTECHNICAL


COMMISSION




ICS 33.100.20 ISBN 978-2-8322-8733-0




 Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------
SIST EN IEC 55014-2:2021
– 2 – CISPR 14-2:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 9
3.1 General . 9
3.2 General terms and definitions . 9
3.3 Abbreviated terms . 14
4 Classification of apparatus. 14
5 Tests . 15
5.1 Electrostatic discharge . 15
5.2 Fast transients . 15
5.3 Injected currents, 0,15 MHz to 230 MHz . 16
5.4 Injected currents, 0,15 MHz to 80 MHz . 18
5.5 Radio frequency electromagnetic fields, 80 MHz to 6 GHz . 19
5.6 Surges . 20
5.7 Voltage dips . 21
6 Performance criteria . 21
7 Applicability of immunity tests . 22
7.1 General . 22
7.2 Application of tests for the different categories of apparatus . 22
7.2.1 General . 22
7.2.2 Category I . 22
7.2.3 Category II . 23
7.2.4 Category III. 23
7.2.5 Category IV . 23
7.2.6 Category V . 24
7.2.7 Exceptions . 24
8 Test conditions . 24
8.1 General . 24
8.2 Mains operation . 25
8.2.1 Voltage at the AC mains port . 25
8.2.2 Frequency at the AC mains port . 25
8.3 DC operation . 25
8.3.1 Battery operation . 25
8.3.2 Operation from a DC supply other than a battery . 25
8.4 Specific test conditions . 26
8.4.1 Control settings . 26
8.4.2 Auxiliary equipment . 26
8.4.3 Specific equipment . 26
8.5 Test procedures . 28
8.6 Multifunction equipment . 29
8.7 Equipment with built-in lighting function . 29
8.8 Equipment incorporating radio functions . 29
9 Compliance with this publication . 29
10 Test uncertainty . 30

---------------------- Page: 8 ----------------------
SIST EN IEC 55014-2:2021
CISPR 14-2:2020 © IEC 2020 – 3 –
11 Test report . 30
Annex A (informative) Guidance for permissible degradation . 31
Bibliography . 32

Figure 1 – Examples of ports . 11
Figure 2 – Example for a test set-up for large EUTs (e.g. refrigerators) where the
cable leaves the EUT on a height of more than 1 m above the floor . 18

Table 1 – Enclosure port . 15
Table 2 – Signal ports, control ports and wired network ports . 15
Table 3 – Input and output DC power ports . 15
Table 4 – Input and output AC power ports . 16
Table 5 – Signal ports, control ports and wired network ports . 16
Table 6 – Input and output DC power ports . 17
Table 7 – Input and output AC power ports . 17
Table 8 – Signal ports, control ports and wired network ports . 18
Table 9 – Input and output DC power ports . 19
Table 10 – Input and output AC power ports . 19
Table 11 – Enclosure ports . 20
Table 12 – Input AC power ports . 20
Table 13 – Wired network ports . 21
Table 14 – Input AC power ports . 21
Table 15 – Immunity tests applicable to Category II . 23
Table 16 – Immunity tests applicable to Category III . 23
Table 17 – Immunity tests applicable to Category IV . 23
Table 18 – Immunity tests applicable to Category V . 24
Table A.1 – Examples of degradations . 31

---------------------- Page: 9 ----------------------
SIST EN IEC 55014-2:2021
– 4 – CISPR 14-2:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
____________

ELECTROMAGNETIC COMPATIBILITY –
REQUIREMENTS FOR HOUSEHOLD APPLIANCES,
ELECTRIC TOOLS AND SIMILAR APPARATUS –

Part 2: Immunity – Product family standard

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard CISPR 14-2 has been prepared by CISPR subcommittee F: Interference
relating to household appliances tools, lighting equipment and similar apparatus.
This third edition cancels and replaces the second edition published in 2015. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) extension of the frequency range for radiated immunity above 1 GHz;
b) an advanced categorisation of equipment;
c) revision of general test conditions and addition of new specific test conditions (e.g. for
robotic equipment);
d) clarification of requirements applicable to equipment incorporating radio functions;

---------------------- Page: 10 ----------------------
SIST EN IEC 55014-2:2021
CISPR 14-2:2020 © IEC 2020 – 5 –
e) addition of requirements for wired network ports;
f) revision of definitions and addition of new ones;
g) delete requirements referring to statistical evaluation;
h) alignment with CISPR 14-1, where applicable.
The text of this document is based on the following documents:
FDIS Report on voting
CIS/F/795/FDIS CIS/F/797/RVD

Full information on the voting for the approval of this document can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the CISPR 14 series, published under the general title Electromagnetic
compatibility – Requirements for household appliances, electric tools and similar apparatus,
can be found on the IEC website.
This document has the status of a product family standard.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 11 ----------------------
SIST EN IEC 55014-2:2021
– 6 – CISPR 14-2:2020 © IEC 2020
INTRODUCTION
The intention of this document is to establish uniform requirements for the electromagnetic
immunity of the equipment mentioned in the scope, to fix test specifications of immunity, to refer
to basic standards for methods of testing, and to standardize operating conditions, performance
criteria and interpretation of results.
Keywords: Immunity, household appliances, electric apparatus, electromagnetic compatibility.

---------------------- Page: 12 ----------------------
SIST EN IEC 55014-2:2021
CISPR 14-2:2020 © IEC 2020 – 7 –
ELECTROMAGNETIC COMPATIBILITY –
REQUIREMENTS FOR HOUSEHOLD APPLIANCES,
ELECTRIC TOOLS AND SIMILAR APPARATUS –

Part 2: Immunity – Product family standard



1 Scope
This part of CISPR 14 specifies the electromagnetic immunity requirements in the frequency
range 0 Hz to 400 GHz that apply to appliances, electric tools and similar apparatus as specified
below, whether powered by AC or DC (including a battery).
This document specifies immunity requirements for continuous and transient electromagnetic
disturbances, both conducted and radiated.
Unless otherwise specified, this document is applicable to all equipment in the scope of CISPR
14-1, namely:
• household appliances or similar apparatus;
NOTE 1 Examples are equipment used:
– for typical housekeeping functions in the household environment, which includes the dwelling and its
associated buildings, the garden, etc.;
– for typical housekeeping functions in shops, offices, commercial and other similar working environments;
– on farms;
– by clients in hotels and other residential type environments;
– for induction cooking or air conditioning, either in residential or commercial environments.
• electric tools;
NOTE 2 Examples of electric tools include electric motor-operated or electromagnetically driven hand-held
tools, transportable tools, lawn and garden machinery.
• similar apparatus;
NOTE 3 Examples are:
– external power controllers using semiconductor devices;
– motor-driven electro-medical equipment;
– electric/electronic toys;
– personal care and beauty care appliances;
– automatic goods-dispensing machines;
– entertainment machines;
– cine or slide projectors;
– battery chargers and external power supplies for use with products under the scope of this document;
– electric fence energisers.
Included in the scope of this document are also microwave ovens for domestic use or catering.
Equipment which incorporate radio transmit/receive functions are included in the scope of this
document.
NOTE 4 For handling cases where equipment under the scope of this document is combined with transmit and/or
receive radio functions, see Clause 8.

---------------------- Page: 13 ----------------------
SIST EN IEC 55014-2:2021
– 8 – CISPR 14-2:2020 © IEC 2020
Excluded from the scope of this document are:
– equipment for which all electromagnetic immunity requirements are explicitly formulated in
other CISPR or IEC standards;
NOTE 5 Examples are:
• luminaires, including portable luminaires for children, discharge lamps, LED lamps and other lighting devices
under the scope of IEC 61547 (but see 8.7);
• multimedia equipment under the scope of CISPR 35;
• mains communication devices, as well as baby surveillance systems;
• arc welding equipment.
– equipment intended to be part of the fixed electrical installation of buildings (e.g. fuses,
circuit breakers, cables and switches);
– medical electrical equipment, including those in the scope of CISPR 14-1;
– equipment used only in industrial environment;
– equipment intended to be used exclusively in locations where special electromagnetic
conditions exist (e.g. high electromagnetic fields nearby broadcast transmitting stations or
high energy pulses nearby power generation stations);
– equipment intended to be used exclusively on a vehicle, ship, boat or aircraft;
– the effects of electromagnetic phenomena relating to the safety of apparatus (see IEC 60335
series);
Also excluded from the scope of this document is AC single-phase equipment with a rated
voltage higher than 250 V between phase and neutral and AC multi-phase equipment with rated
voltage higher than 480 V.
Abnormal operation of the equipment, such as simulated faults in the electric circuitry for testing
purposes, is not taken into consideration.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60050-161, International Electrotechnical Vocabulary (IEV) – Part 161: Electromagnetic
compatibility
IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) – Part 4-2: Testing and
measurement techniques – Electrostatic discharge immunity test
IEC 61000-4-3:2006, Electromagnetic compatibility (EMC) – Part 4-3: Testing and
measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-3:2006/AMD1:2007
IEC 61000-4-3:2006/AMD2:2010
IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) – Part 4-4: Testing and
measurement techniques – Electrical fast transient/burst immunity test
IEC 61000-4-5:2014, Electromagnetic compatibility (EMC) – Part 4-5: Testing and
measurement techniques – Surge immunity test
IEC 61000-4-5:2014/AMD1:2017

---------------------- Page: 14 ----------------------
SIST EN IEC 55014-2:2021
CISPR 14-2:2020 © IEC 2020 – 9 –
IEC 61000-4-6:2013, Electromagnetic compatibility (EMC) – Part 4-6: Testing and
measurement techniques – Immunity to conducted disturbances, induced by radio-frequency
fields
IEC 61000-4-11:2020, Electromagnetic compatibility (EMC) – Part 4-11: Testing and
measurement techniques – Voltage dips, short interruptions and voltage variations immunity
tests for equipment with input current up to 16 A per phase
IEC 61000-4-20:2010, Electromagnetic compatibility (EMC) – Part 4-20: Testing and
measurement techniques – Emission and im
...