SIST HD 134.6 S1:2004

SLOVENSKI STANDARD
SIST HD 134.6 S1:2004
01-januar-2004
[Not translated]
Radio-frequency connectors - Part 6: R.F. coaxial connectors for cables 96 IEC 60075-
17 and larger (IEC 60169-6:1971)
Hochfrequenz-Steckverbindungen - Teil 6: Koaxiale HD Steckverbinder für Kable vom
Typ 96 IEC 60075-17 und größer (IEC 60169-6:1971)
Connecteurs pour fréquences radioélectriques - Partie 6: Connecteurs coaxiaux pour
fréquences radioélectriques pour câbles 96 IEC 60075-17 et plus gros (CEI 60169-
6:1971)
Ta slovenski standard je istoveten z: HD 134.6 S1:1977
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST HD 134.6 S1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 134.6 S1:2004

---------------------- Page: 2 ----------------------

SIST HD 134.6 S1:2004

---------------------- Page: 3 ----------------------

SIST HD 134.6 S1:2004

---------------------- Page: 4 ----------------------

SIST HD 134.6 S1:2004
NORME CEI
INTERNATIONALE IEC
60169-6
INTERNATIONAL
Première édition
STANDARD
First edition
1971-01
Connecteurs pour fréquences radioélectriques
Sixième partie:
Connecteurs coaxiaux pour fréquences
radioélectriques pour câbles 96 IEC 75-17 et
plus gros
Radio-frequency connectors
Part 6:
R.F. coaxial connectors for cables 96 IEC 75-17
and larger
© IEC 1971 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
IEC Men nyHapogHae 3nenrporexHH4ecnaA HOMHCCHA
voir vigueur
Pour prix, catalogue en
• • For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST HD 134.6 S1:2004
CONTENTS
Page
FOREWORD 5
PREFACE 5
Clause
1. Scope 7
IEC type designation 7
2.
3. Ratings 7
7
4. Climatic category
Dimensions 8
5.
10
6. Gauges
11
Survey of patterns 7.
13
8. Schedule for type tests

---------------------- Page: 6 ----------------------

SIST HD 134.6 S1:2004
— 5 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
RADIO-FREQUENCY CONNECTORS
Part 6 : R.F. coaxial connectors for cables 96 IEC 75-17 and larger
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the
1)
National Committees having -a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in that
2)
sense.
3) In order to promote this international unification, the IEC expresses the wish that all National Committees having as
yet no national rules, when preparing such rules, should use the IEC recommendations as the fundamental basis for these
rules in so far as national conditions will permit.
4) The desirability is recognized of extending international agreement on these matters through an endeavour to harmonize
national standardization rules with these recommendations in so far as national conditions will permit. The National
Committees pledge their influence towards that end.
5) The IEC has not laid down any procedure concerning marking as an indication of approval and has no responsibility
when an item of equipment is declared to comply with one of its recommendations.
PREFACE
This Recommendation has been prepared by Sub-Committee 46A, R.F. Cables and their Accessories,
of IEC Technical Committee No. 46, Cables, Wires and Waveguides for Telecommunication Equipment.
It forms Part 6 of the complete Recommendation for radio-frequency connectors.
Part 1 : General Requirements and Measuring Methods, with which this Publication must be used, is
issued as IEC Publication 169-1. The specific Recommendation on Coaxial Unmatched Television
Aerial Feeder Connector is issued as IEC Publication 169-2. The Recommendation on Two-pin Connector
for Twin Balanced Aerial Feeders is issued as IEC Publication 169-3. The Recommendation on R.F.
Coaxial Connectors for Cables 96 IEC 50-12 is issued as IEC Publication 169-4. The Recommendation
on R.F. Coaxial Connectors for Cables 96 IEC 50-17 and larger is issued as IEC Publication 169-5.
Subsequent relevant specifications for other types of connectors will be issued from time to time as they
become ready.
A first draft of Part 6 was discussed at the meeting held in Aix-les-Bains in 1964. After the meeting held
in Tel-Aviv in 1966, a revised draft was submitted to the National Committee for approval under the Six
Months' Rule in July 1967.
The following countries voted explicitly in favour of publication of Part 6 :
Australia Japan
Belgium Netherlands
Canada Sweden
Denmark Switzerland
Finland Turkey
Germany United Kingdom
Israel United States of America
Italy

---------------------- Page: 7 ----------------------

SIST HD 134.6 S1:2004
— 7 —
RADIO-FREQUENCY CONNECTORS
Part 6: R.F. coaxial connectors for cables 96 IEC 75 -17 and larger
1. Scope
This Recommendation covers a range of patterns of r.f. coaxial connectors for use with r.f. cables
96 IEC 75-17 and larger, conforming to IEC Publication 96-2, Radio-frequency Cables, Part 2:
Relevant Cable Specifications.
2. I E C type designation
Connectors conforming to this Recommendation shall be designated by :
a) the reference to this Recommendation : 169-6 IEC ;
b) a serial number (see Clause 7).
Example:
169-6 IEC 75-17-1 denotes a free pin connector to be used with an r.f. coaxial cable 96 IEC 75-17-1/2.
3. Ratings
Under consideration.
4. Climatic category
Category Temperature range Damp heat, steady state
40/85/21 —40 °C to 85 °C 21 days

---------------------- Page: 8 ----------------------

SIST HD 134.6 S1:2004
8
5. Dimensions 5. Dimensions
Les dimensions en millimètres sont les Millimetre dimensions are original dimen-
dimensions originales. sions.
5.1 Connecteur à broche 5.1 Pin connector
FIG. 1. - Détail du filetage.
Detail of screw thread. FIGURE 2

TABLEAU I TABLE I
Référence
mm in Figure Note
Reference
a Tr 50 x 3 Tr 50 x 3 1-3
b 38.00
1.496 ±
± o.to
0.004 1
c 28.00 f 0.11 1.102 s 0.0043 1
d 6.50 _'._ 0.05 0.256 _ 0.002 ^ 1-2
e
8.00 -_ 0.10 0.315:_0.004 l
+ 0.10 1
0.004
f 31.00 s0 1.22 -
g 13.50 ± 0.50 0.531 = 0.02
h 7.00 0.10
± 0.276 - 0.004
k 2.00 0.079 -
± ô.20
o.00s
1 2.50 ± 0.30 0.098 := 0.012
m 5.00 max. 0.197 max.
p 3.00 0.118
r 1.50 0.059 1
s 47.50 1.870 1
u
50.50 1.992 1
Notes I.- La concentricité de chaque diamètre avec 1 axe Notes 1. - Each diameter shall be concentric with a
commun doit être supérieure à t/2, « t » étant common axis within t/2, where " t" is the
la tolérance totale sur le diamètre considéré.
total tolerance of that diameter.
2.- La dimension « d» doit être mesurée avant 2. - Dimension " d" shall be measured before
exécution des fentes. slotting.
3. - Tr 50 X 3 indique un filetage trapézoïdal
3. - Tr 50 X 3 indicates Acme screw thread with
ayant un diamètre nominal de 50 mm et un nominal diameter 50 mm (1.97 in) and pitch
pas de 3 mm. 3 mm (0.118 in).

---------------------- Page: 9 ----------------------

SIST HD 134.6 S1:2004
9
5.2 Connecteur à douille
5.2 Socket connector
0 a
^
IL11.,^!NIE11.1
k
;\^I I II !!;111^111^^,
•
^ :W^.^,
FIG. 3. - Détail du filetage.
Detail of screw thread.

TABLEAU II
TABLE II
Référence
mm in Figure Note
Reference
a Tr50X3 Tr50x3 1-3
38.00 + I.496 +
0 °8 0.00071 1
c ±
28.00 * 0.11 1.102 0.0043 1-2
d
8.00 ± 0.10 0.315 ± 0.004 1
e 6.50 0.05 1
± 0.256 ± 0.002 4
_+_
1-2
f 31.00 i 1 . 22 0.10 0.004
0.20 ± 0.008
g 2.00 + 0.079
h
6.00 ± 0.30 0.236 _ 0.012
k
18.00 min. 0.709 min.
1 20.00 min.
0.787 min.
m 6.00 min.
0.236 min.
n 5.00 -_ 0.10 0.197 , 0.004
p 3.00 0.118
1.75 0.069 3
s
46.50 1.831 1
u
50.00 1.969 1
Notes 1. - La concentricité de chaque diamètre avec
Notes 1.- Each diameter shall be concentric with a
l'axe commun doit être supérieure à t/2,
common axis within t/2, where " t" is the
«
t» étant la tolérance totale sur le diamètre total tolerance of that diameter.
considéré.
2. - Les dimensions «c» et «f»
doivent être 2. - Dimensions " c" and "f " shall be measured
mesurées avant exécution des fentes.
before slotting.
3. - Tr 50 x 3 indique un filetage trapézoïdal 3.
- Tr 50 x 3 indicates Acme screw thread with
ayant un diamètre nominal de 50 mm et un nominal diameter 50 mm (1.97 in) and pitch
pas de 3 mm.
3 mm (0.118 in).

---------------------- Page: 10 ----------------------

SIST HD 134.6 S1:2004
— 10 —
6. Calibres 6. Gauges
6.1 Calibres pour la mesure de la «résistance de 6.1 Gauges for measuring " contact resistance"
contact» et de la «force de rétention» and " gauge retention force"

FIGURE 5 FIGURE 6 FIGURE 7 FIGURE 8

Dimensions Dimensions
Référence
mm Figure
in
Reference
o
6.45 _ 0.254 _
a
0.009 0.0004 5
0 .0004 6
b 6.55 + '009 + 0
0.258
c 7.00 ± 0.100 0.276
± 0.004 7 et/and 8
d 38.00 1.496
— 0 .007 _ 0
.0003
7
e 31.00 1.220
_ _
0.007
0.0003
0.007 0003
f 37.90 + 1.492 + 0
8
+ O.00ï + 0.0003
g 31.062 1.222 0
0
Calibre pour Matériau
Figure
Gauge for Material
Vérification des dimensions Acier poli, rugosité de surface
5 et/and 7
Sizing purposes Steel, polished, surface roughness
Ra = 0.1 pm (4 pin) max.
Mesure de la résistance de contact Cuivre au béryllium recouvert d'argent rhodié
6 et/and 8
Measurement of contact resistance Beryllium copper, silver- and rhodium plated
Mesure de la force de rétention du Acier poli, rugosité de surface
Steel, polished, surface roughness
conducteur intérieur
6
Measurement of gauge retention Ra = 0.1 pm (4 pin) max.
force of inner conductor Masse : 1 kg Weight : 1 kg
Mesure de la force de rétention du Acier poli, rugosité de surface
Steel, polished, surface roughness
conducteur extérieur
8
Measurement of gauge retention Ra = 0.1 pm (4 pin) max.
force of outer conductor Masse : 3 kg Weight : 3 kg
6.2 Dimensions du connecteur de référence po
...