Cabinet roller towels - Performance requirements and processing

This Standard specifies requirements for the following:
a) Three categories of cabinet towel, the categories being defined in terms of mass per unit area and tensile strength of the fabric; certain constructional and performance requirements are also covered.
b) Process validation procedures to ensure that cabinet towels achieve the condition of hygienic  cleanliness in processing.
It also contains informative annexes containing the following:
- an example of suitable fabric structure,
- recommendations for the care, use and transportation of cabinet towels after processing,
- examples of key process variables for disinfection,
- the preparation and application of bioindicators for the validation of the process to achieve hygienic cleanliness.
The colour fastness to washing test and the requirement level are based on the assumption that chlorine bleaching treatments will not be used in laundering.

Rollenhandtücher für Handtuchspender - Anforderungen und Behandlung

Anwendungsbereich
Diese Norm legt Anforderungen hinsichtlich folgender Punkte fest:
a) Drei Kategorien von Handtüchern für Handtuchspender, die im Hinblick auf die Masse je Flächeneinheit und die Reißfestigkeit des textilen Flächengebildes definiert werden; es werden auch bestimmte Anforderungen an die Gewebestruktur und die Gewebetauglichkeit festgelegt.
b) Validierungsverfahren für die Behandlung zur Sicherstellung, dass die Handtücher durch die Behandlung eine den hygienischen Anforderungen entsprechende Sauberkeit erhalten.
Sie enthält außerdem informative Anhänge folgenden Inhalts:
3 ein Beispiel für eine geeignete Gewebestruktur;
3 Empfehlungen für Pflege, Gebrauch und Transport von Rollenhandtüchern nach der Behandlung;
3 Beispiele von Prozessvariablen für die Durchführung der Desinfektion;
3 Herstellung und Verwendung von Bioindikatoren für die Validierung des Behandlungsverfahrens zur Erzielung einer den hygienischen Anforderungen entsprechenden Sauberkeit.
Die Anforderungen an die Farbechtheit bei der Waschprüfung sind unter der Voraussetzung festgelegt, dass bei der Waschbehandlung keine chlorhaltigen Bleichmittel verwendet werden.

Serviettes textiles essuie-mains en bobine pour distributeur - Criteres de performance et traitement

Domaine d'application
La présente Norme Européenne spécifie des exigences concernant :
a) trois catégories d'essuie-mains pour distributeur, les catégories étant définies en termes de masse par unité de surface et de résistance a la rupture de l'étoffe ; certains criteres de construction et de performance sont également couverts ;
b) les procédures de validation pour s'assurer que les essuie-mains pour distributeur remplissent bien les conditions de propreté hygiénique au cours du traitement ;
Elle contient également un certain nombre d'annexes informatives regroupant :
3 un exemple d'armure adaptée ;
3 des recommandations relatives a l'entretien, l'utilisation et au transport des essuie-mains pour distributeur apres traitement ;
3 des exemples de variables de processus clés pour la désinfection ;
3 la préparation et l'application de bio-indicateurs pour la validation de la procédure en vue de l'obtention de la propreté hygiénique.
La solidité des teintures a l'essai de lavage et le niveau d'exigence reposent sur l'hypothese qu'aucun traitement de décoloration par le chlore ne sera utilisé lors du blanchissage.

Brisače na valju - Delovne zahteve in oplemenitenje

General Information

Status
Published
Publication Date
30-Nov-2001
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2001
Due Date
01-Dec-2001
Completion Date
01-Dec-2001

Buy Standard

Standard
EN 13569:2001
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rollenhandtücher für Handtuchspender - Anforderungen und BehandlungServiettes textiles essuie-mains en bobine pour distributeur - Criteres de performance et traitementCabinet roller towels - Performance requirements and processing97.160Tekstilije za dom. PeriloHome textiles. LinenICS:Ta slovenski standard je istoveten z:EN 13569:2001SIST EN 13569:2001en01-december-2001SIST EN 13569:2001SLOVENSKI
STANDARD



SIST EN 13569:2001



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13569July 2001ICS 59.080.30; 97.160English versionCabinet roller towels - Performance requirements andprocessingServiettes textiles essuie-mains en bobine pour distributeur- Critères de performance et traitementRollenhandtücher für Handtuchspender - Anforderungenund BehandlungThis European Standard was approved by CEN on 10 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13569:2001 ESIST EN 13569:2001



EN 13569:2001 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.44Characteristics of the towel.45Testing.76Towel processing.77Declaration of conformity.8Annex A (informative)
Example of suitable fabric structure.9Annex B (informative)
Recommendations for the care, use and transportation of towels.10Annex C (informative)
Key process variables.11Annex D (informative)
Preparation and application of bioindicators for validation of theprocess to achieve hygienic cleanliness.13Annex E (informative)
Types of cabinet roller towel dispenser.16SIST EN 13569:2001



EN 13569:2001(E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 248 "Textiles andtextile products", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by January 2002, and conflicting national standardsshall be withdrawn at the latest by January 2002.Anexes A, B, C, D and E are for information only.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.1 ScopeThis Standard specifies requirements for the following:a) Three categories of cabinet towel, the categories being defined in terms of mass per unit areaand tensile strength of the fabric; certain constructional and performance requirements are alsocovered.b) Process validation procedures to ensure that cabinet towels achieve the condition of hygieniccleanliness in processing.It also contains informative annexes containing the following:-an example of suitable fabric structure,-recommendations for the care, use and transportation of cabinet towels after processing,-examples of key process variables for disinfection,-the preparation and application of bioindicators for the validation of the process to achievehygienic cleanliness.The colour fastness to washing test and the requirement level are based on the assumption thatchlorine bleaching treatments will not be used in laundering.2 Normative referencesThis European Standard incorporates by dated or undated reference provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).EN 1413, Textiles — Determination of pH of aqueous extractSIST EN 13569:2001



EN 13569:2001 (E)4EN 1644-1 :1997, Test methods for nonwoven compresses for medical use — Part 1: Nonwovensused in the manufacture of compressesEN 1773, Textile - Fabrics — Determination of width and lengthEN 12127, Textiles — Fabrics — Determination of mass per unit area using small samplesEN ISO 105-X12, Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing(ISO 105-X12:1993)EN ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1 : Determination of maximum forceand elongation at maximum force
using the strip method (ISO 13934-1 :1999)EN 20105-CO4, Textiles — Tests for colour fastness — Part C04: Colour fastness to washing: Test 4(ISO 105-C04:1989)ISO 5351-1, Cellulose in dilute solutions — Determination of limiting viscosity number —Part 1: Method in cupri-ethylene-diamine (CED) solutionISO 7771, Textiles — Determination of dimensional changes of fabrics induced by cold-waterimmersion3 Terms and definitionsFor the purposes of this standard, the following terms and definitions apply.3.1cabinet roller towelreusable textile fabric rolls manufactured for use in particular types of towel dispenser unit so that aclean length of towelling is provided, either automatically or through manual action, for the purpose ofdrying the hands of the user4 Characteristics of the towel4.1 Functional characteristics4.1.1 GeneralThe functional characteristics are dictated by the requirements of rolling and unrolling the towel in thedispenser and of the wiping and drying of
the hands.4.1.2 Strength and selvedgesThe towel needs to have sufficient strength (see Table 1) to withstand the pulling action exerted whenthe towel is rolled and unrolled as well as when the hands are wiped and dried by the user. Selvedgesneed to be constructed so the towel rolls and unrolls correctly within the dispenser for which it isdesigned (See 4.2.2.2).4.1.3 Wiping functionIn order to wipe the hands effectively the towel needs to be readily moulded by the hands and fingers,exert sufficient friction to feel comfortable when in contact with the skin, and present an irregularsurface to improve the removal of residual substances from the hands. These attributes can only beassessed subjectively.SIST EN 13569:2001



EN 13569:2001(E)54.1.4 Drying functionThe fabric shall have a high capacity for the rapid absorption of water. The liquid absorbancy time istaken as measure for the drying properties (see 4.2.2.1).4.1.5 CleanlinessFor the purposes of this standard, a towel shall be considered to be hygienically clean when treated ina disinfecting process carried out according to a validated washing and finishing procedure (seeclause 6). As micro-organisms may start to multiply as soon as the disinfecting process is complete,its effectiveness is maintained by the removal of soil and stains (sources of nutrients) and adequatelydrying the towel.NOTEMoisture and a source of nutrients are required by the micro-organisms in order to multiply.4.2 Technical characteristics4.2.1 FibresCotton or man-made fibres or blends shall be used to produce plain or twisted yarns for weaving thefabric.NOTEThe introduction of polyester has the effect of augmenting the resistance to pilling and abrasion, butreducing the absorption capacity (e.g. The introduction of 50 % polyester reduces the absorption capacity byapproximately 25 %), conversaly the introduction of man-made fibres can augment the absorption; for example amixture composed of
62 % cotton, 25 % polyester and 13 % viscose has a similar rate of absorption capacity tothat of a 100 % cotton fabric.4.2.2 Fabric4.2.2.1 Properties and performancea) Fabrics shall conform to the requirements shown in Table 1. The requirements of Table 1 apply totowels, which have been bleached in manufacture, and prior to the first processing (see 4.1.5) inthe laundry.NOTEBleaching by the manufacturer before supply to the laundry is the more common practice. If theconditions of supply vary, then the point at which the performance requirements apply will vary also and someammendment of the values given in Table 1 may be needed.b) Dyed fabrics shall also comply with the requirements shown in Table 2.SIST EN 13569:2001



EN 13569:2001 (E)6Table 1 — Towel properties prior to first processing (4.1.5)TowelcategoryMass per unitareaMinimumtensilestrength offabricMaximumdimensionalchange, watersoakDegree ofpolymeri-sation incottonfibreLiquidabsorbancytimepHwarpweftwarpweftDpsg/m²NN%%lightless than 200630340medium210 ± 10650390- 5± 2 2000max.5heavygreater than 2206704404,6 to7,8TestmethodEN 12127EN ISO 13934-1ISO 7771ISO 5351-1EN 1644-1 :1997annex BEN 1413Table 2 — Colour fastnessColour fastness to:Minimum ratingTest methodColour changeStainingwashing44EN 20105-C04rubbing:EN ISO 105-X12dry-3washing and drying the sampleonce in accordance withwet-3EN 20105-C04, and place onthe rubbing finger, withreference fabric on the block.4.2.2.2 StructureSelvedges shall either be woven or tucked in. Selvedges shall be constructed so the towel rolls andunrolls correctly within the dispenser for which it is designed. Because of their importance to theperformance of the towel and the functioning of the cabinet, selvedges should be properlyconstructed.NOTE 1Some towels may include polyester yarns in the selvedge to provide extra strength. There is, atpresent, no agreed meaningful test for selvedge performance.NOTE 2Examples of suitable structures are given in annex A.4.3 Suitability for dispensers4.3.1 GeneralThe towel under normal tension shall fit easily into the compartments of the dispenser cabinet forwhich it is intended to be used and its width shall not exceed that of the entry and exit openings of thedispenser.SIST EN 13569:2001



EN 13569:2001(E)74.3.2 Length and widthIn order to fit the different
types of dispenser available, the stated length of a towel may vary from20 m to 45 m (measured according to EN 1773), and the stated width from 0,19 m to 0,30 m(measured according to EN 1773). However, particular types of dispenser may require towels ofdifferent dimensions.The towel shall be capable of being loaded in such a way that it will allow the dispenser, for which it isdesigned, to function properly without causing any blockage.4.4 Specifications4.4.1 Performance in serviceTable 3 denotes the fabric specification for all cabinet towels at the time of every supply to the end-user whilst compliance with this Standard is claimed.Table 3 — Fabric properties at the time of every supplyLiquidabsorbencetimepHHygieniccleanlinessPresentationsmax. 54,6 to 7,8See 4.1.5 and clause 6The towel shall be finished,dry, rolled and fit for purpose,which includes its use in thedispenserEN 1644-1 :1997annex BEN 1413The towel shall be free from unacceptable stains (as defined in the contract with the customer).5 TestingSampling frequency shall be as agreed in the contract between the parties.From each roll to be tested a laboratory sample shall be cut, from a position taken at random, but atleast 3 m from the end of the roll.The laboratory sample shall be large enough to provide test specimens for all the tests required bythis standard.6 Towel processing6.1 Hygienic processing of towelsThis Standard requires that hygienic cleanliness shall be achieved during the washing and finishingprocess. Instead of specifying processes there is a requirement to design, validate and monitor thechosen procedure, using the method described
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.