SIST EN 869:2007+A1:2009

Oznaka standarda: SIST EN 869:2007+A1:2009
Koda projekta: 00202016
Organizacija: SIST
Naslov (angleški): Safety of machinery - Safety requirements for pressure metal diecasting units
Naslov (slovenski): Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 869:2007+A1:2009 angleški jezik Active SIST-I: 85.91 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 25.120.30
Status: Objavljen
Objavljen: 01-jun-2009
Refer. št. objave: Sporočila 2009-06
Referenčna oznaka: EN 869:2006+A1:2009
Področje projekta (angleško): This European Standard specifies the safety requirements for pressure metal diecasting units. It applies to pressure diecasting machines and to the interfaces with the following ancillary equipment: - die, - melting, holding and dosing furnaces (see EN 746-1), - metal feeding equipment, - inserting and removal devices, - spraying appliances, - heat exchanger for the die. This ancillary equipment itself is not covered. Additional risks arising from the material being cast are not covered. This standard does not apply to low pressure diecasting machines and/or gravity diecasting machines. This standard deals with all significant hazards, hazardous situations and events relevant to pressure diecasting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment. This document is not applicable to pressure metal diecasting units/machinery which are manufactured before the date of its publication as EN.
Povezava na standarde
Povezava Ime Datum
Revidiran oSIST prEN ISO 23063:2020 - Livarski stroji - Varnostne zahteve za stroje za tlačno litje (ISO/DIS 23063:2020) 06-feb-2019
Konsolidira SIST EN 869:2007/kprA1:2008 - Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin 01-jun-2009
Konsolidira SIST EN 869:2007 - Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin 01-jun-2009


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi