SIST EN 60749-42:2014

SLOVENSKI STANDARD
SIST EN 60749-42:2014
01-december-2014
3ROSUHYRGQLãNLHOHPHQWL0HWRGH]DPHKDQVNRLQNOLPDWVNRSUHVNXãDQMHGHO
6KUDQMHYDQMHSULGRORþHQLWHPSHUDWXULLQYODåQRVWL,(&
Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature
humidity storage
/
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie
42: Stockage - Température et humidité
Ta slovenski standard je istoveten z: EN 60749-42:2014
ICS:
19.060 Mehansko preskušanje Mechanical testing
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN 60749-42:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60749-42:2014

---------------------- Page: 2 ----------------------

SIST EN 60749-42:2014


EUROPEAN STANDARD EN 60749-42

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 31.080.01

English Version
Semiconductor devices - Mechanical and climatic test methods -
Part 42: Temperature and humidity storage
(IEC 60749-42:2014)
Dispositifs à semiconducteurs - Méthodes d'essais Halbleiterbauelemente - Mechanische und klimatische
mécaniques et climatiques - Partie 42: Stockage de Prüfverfahren - Teil 42: Lagerung bei Wärme und Feuchte
température et d'humidité (IEC 60749-42:2014)
(CEI 60749-42:2014)
This European Standard was approved by CENELEC on 2014-09-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60749-42:2014 E

---------------------- Page: 3 ----------------------

SIST EN 60749-42:2014
EN 60749-42:2014 - 2 -


Foreword
The text of document 47/2200/FDIS, future edition 1 of IEC 60749-42, prepared by IEC/TC 47
"Semiconductor devices." was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60749-42:2014.


The following dates are fixed:
(dop) 2015-06-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-09-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.


Endorsement notice
The text of the International Standard IEC 60749-42:2014 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60749-42:2014
- 3 - EN 62056-9-7:2014

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.


Publication Year Title EN/HD Year

IEC 60749-20 -  Semiconductor devices - Mechanical and EN 60749-20 -
climatic test methods -- Part 20: Resistance
of plastic encapsulated SMDs to the
combined effect of moisture and soldering
heat

---------------------- Page: 5 ----------------------

SIST EN 60749-42:2014

---------------------- Page: 6 ----------------------

SIST EN 60749-42:2014




IEC 60749-42

®


Edition 1.0 2014-08




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Semiconductor devices – Mechanical and climatic test methods –

Part 42: Temperature and humidity storage




Dispositifs à semiconducteurs – Méthodes d’essais mécaniques et climatiques –

Partie 42: Stockage de température et d'humidité
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX H


ICS 31.080.01 ISBN 978-2-8322-1785-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60749-42:2014
– 2 – IEC 60749-42:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test equipment . 5
3.1 Capacity of the equipment . 5
3.2 Materials and construction of the thermostatic/humidistatic chamber . 5
3.3 Water to be used in the test . 5
4 Procedure . 5
4.1 Preconditioning . 5
4.2 Initial measurements . 6
4.3 Tests . 6
4.3.1 Inserting and removing specimens . 6
4.3.2 Test conditions . 6
4.3.3 Test duration . 6
4.3.4 Post treatment . 7
4.3.5 End-point measurement . 7
5 Failure criteria . 7
6 Information to be given in applicable procurement document . 8

Figure 1 – Unsaturated pressurized vapour test conditions profile. 7

Table 1 – Temperature and humidity storage test conditions . 6

---------------------- Page: 8 ----------------------

SIST EN 60749-42:2014
IEC 60749-42:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –

Part 42: Temperature and humidity storage

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate,
...