iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12197:1998

(Main)

Gymnastic equipment - Horizontal bars - Safety requirements and test methods

Gymnastic equipment - Horizontal bars - Safety requirements and test methods

This European Standard specifies specific safety requirements (see clause 4) for horizontal bars in addition to the general safety requirements in EN 913. This European Standard is applicable to three types of horizontal bars (see table 1).

Turngeräte - Reck - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Norm legt besondere sicherheitstechnische Anforderungen (siehe Abschnitt 4) zu den allgemeinen sicherheitstechnischen Anforderungen in EN 913 fest. Diese Europäische Norm gilt für drei Typen von Recks (siehe Tabelle 1).

Matériel de gymnastique - Barres fixes - Exigences de sécurité et méthodes d'essai

La présente norme européenne prescrit des exigences de sécurité spécifiques (voir articles 4) relatives aux barres fixes, en complément des exigences générales de sécurité de l'EN 913. La présente norme européenne s'applique a trois types de barres fixes (voir tableau 1).

Gimnastična oprema - Drogovi - Varnostne zahteve in preskusne metode

General Information

Status
Published
Publication Date
31-Aug-1998
ICS
97.220.30 - Indoor sports equipment
Technical Committee
SPO - Sports
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-1998
Due Date
01-Sep-1998
Completion Date
01-Sep-1998
Directive
2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
Ref Project
EN 12197:1997 - Gymnastic equipment - Horizontal bars - Safety requirements and test methods

Buy Standard

EN 12197:1998EN 12197:1998
PreviousNext
Standard
EN 12197:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12197:1998
01-september-1998
*LPQDVWLþQDRSUHPD'URJRYL9DUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH
Gymnastic equipment - Horizontal bars - Safety requirements and test methods
Turngeräte - Reck - Sicherheitstechnische Anforderungen und Prüfverfahren
Matériel de gymnastique - Barr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 913:2019+A1:2021(Main)
Gymnastic equipment - General safety requirements and test methods
EN 913:2018+A1:2021

This document specifies general safety requirements and test methods for all pieces of gymnastic and sports equipment and for all pieces of equipment for the use of physical education, training and competition, intended for use supervised by a competent person and not specified in other, individual standards and/or federation rules.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-7:2021(Main)
Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020)
EN ISO 20957-7:2021

This part of ISO 20957 specifies safety requirements for rowing equipment in addition to the general safety requirements of ISO 20957-1 and should be read in conjunction with it.
This part of ISO 20957 is applicable to rowing type stationary training equipment, hereinafter referred to as rowing equipment, within the classes H, S and I as well as classes A, B and C regarding accuracy.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-2:2021(Main)
Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods (ISO 20957-2:2020)
EN ISO 20957-2:2021

This part of ISO 20957 specifies additional safety requirements for stationary strength training equipment in addition to the general safety requirements of ISO 20957-1.
This part of ISO 20957 is applicable to stationary training equipment type strength training equipment with stack weight resistance or other means of resistance like elastic cords, hydraulic, pneumatic, electrical, magnetic, springs and externally loaded weights (type 2) (hereinafter referred to as training equipment) with the classes H, S and I according to ISO 20957-1.
NOTE Free-weight barbell racks are subject to the requirements of ISO 20957-4 and ISO 20957-1.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 914:2020(Main)
Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety
EN 914:2020

This document specifies functional requirements (see Clause 3) and specific safety requirements in addition to the general safety requirements in EN 913 (see Clause 4), which is read in conjunction with this standard.
This document is applicable to two types of parallel bars (see Table 1) intended for use under supervision of a competent person.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-9:2017/A1:2019(Amendment)
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
EN ISO 20957-9:2016/A1:2019
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 748:2013+A1:2018(Main)
Playing field equipment - Football goals - Functional and safety requirements, test methods
EN 748:2013+A1:2018

This document specifies the functional requirements for 4 types and 2 sizes (see Clause 3) and the safety requirements (see Clause 4) for football goals.
It is applicable to football goals for training and competition in outdoor sports facilities and indoor arenas.
The following football goals are excluded:
a)   EN 16579: goals with a size of 5,00 m × 2,00 m and 7,32 m × 2,44 m and with a total weight of ≥ 10 kg and ≤ 42 kg (total weight includes net, net fixing and any permanently attached anchoring or stabilizing system);
b)   EN 16664: (lightweight goals).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-8:2018(Main)
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
EN ISO 20957-8:2017

This document specifies safety requirements for stepper, stairclimber and climber machines (hereafter
called training equipment) performed from either a standing or sitting position. The requirements are
in addition to the general safety requirements of ISO 20957-1, with which this document is intended to
be read in conjunction.
This document is applicable to stationary training equipment type stepper, stairclimber and climber
training equipment, within classes S and H. Additional requirements are provided for accuracy class A.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-10:2018(Main)
Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)
EN ISO 20957-10:2017

This part of EN 957 specifies safety requirements for exercise bicycles with a fixed wheel or without freewheel that have an inertia of > 0,6 kg x m² in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This part of EN 957 is applicable to stationary training equipment type exercise bicycle with a fixed wheel or without freewheel (type 10) within the classes S and H. Any attachment provided with the exercise bicycle with a fixed wheel or without freewheel for the performance of additional exercises are subject to the requirements of EN 957-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-4:2017(Main)
Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)
EN ISO 20957-4:2016

This part of ISO 20957 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of ISO 20957 1 and should be read in conjunction with it. This part of ISO 20957 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S, H and I.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-9:2017(Main)
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
EN ISO 20957-9:2016

This Part of prEN 957 specifies safety requirements for elliptical trainers also described as cross training machines in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day