SIST EN 2862:2010
(Main)Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C
Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C
This European Standard specifies the characteristics of 90° corner, counterbored, fixed, anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1 100 MPa 1/235 °C.
Luft- und Raumfahrt - Annietmuttern, selbstsichernd, 90° Eckflansch, mit zylindrischer Aussenkung, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 1100 MPa (bei Raumtemperatur/235 °C
Série aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90°, avec chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 1100 MPa (à température ambiante)/235 °C
Aeronavtika - Zakovne matice, samovarovalne, fiksne, rob 90°, z izvrtino za vijake, iz legiranega jekla, kadmirane, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/235 °C
Ta evropski standard določa značilnosti fiksnih zakovnih matic z robom 90° z izvrtino za vijake in samovarovalno funkcijo, ki je omogočena s tem, da je zgornji del oblikovan ovalno, iz legiranega jekla, kadmirane, mazane z MoS2. Razvrstitev: 1.100 MPa 1/235°C.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Zakovne matice, samovarovalne, fiksne, rob 90°, z izvrtino za vijake, iz legiranega jekla, kadmirane, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/235 °CLuft- und Raumfahrt - Annietmuttern, selbstsichernd, 90° Eckflansch, mit zylindrischer Aussenkung, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 1100 MPa (bei Raumtemperatur/235 °CSérie aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90°, avec chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 1100 MPa (à température ambiante)/235 °CAerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2862:2009SIST EN 2862:2010en,de01-februar-2010SIST EN 2862:2010SLOVENSKI
STANDARD
SIST EN 2862:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2862
December 2009 ICS 49.030.30 English Version
Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 °C
Série aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90°, avec chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °C
Luft- und Raumfahrt - Annietmuttern, selbstsichernd, 90° Eckflansch, mit zylindrischer Aussenkung, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse : 1 100 MPa (bei Raumtemperatur / 235 °C This European Standard was approved by CEN on 29 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2862:2009: ESIST EN 2862:2010
EN 2862:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Required characteristics .53.1Configuration — Dimensions — Masses .53.2Materials .53.3Surface treatment .54Designation .75Marking .76Technical specification .7 SIST EN 2862:2010
EN 2862:2009 (E) 3 Foreword This document (EN 2862:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.