Coating powders - Part 14: Vocabulary (ISO 8130-14:2019)

This document defines special terms used in the field of coating powders.
Other terms and definitions related to paints and varnishes are given in ISO 4618.

Pulverlacke - Teil 14: Terminologie (ISO 8130-14:2019)

In diesem Dokument sind spezielle Fachbegriffe definiert, die auf dem Gebiet der Pulverlacke angewendet werden.
Andere Begriffe für Beschichtungsstoffe sind in ISO 4618 enthalten.

Poudres pour revêtement - Partie 14: Vocabulaire (ISO 8130-14:2019)

Le présent document définit des termes particuliers utilisés dans le domaine des poudres pour revêtement.
D'autres termes et définitions relatifs aux peintures et vernis figurent dans l'ISO 4618.

Praškasti premazi - 14. del: Slovar (ISO 8130-14:2019)

Ta dokument določa posebne izraze, ki se uporabljajo na področju praškastih premazov.
Drugi izrazi in definicije v zvezi z barvami in laki so podani v standardu ISO 4618.

General Information

Status
Published
Public Enquiry End Date
19-Jun-2018
Publication Date
10-Jun-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-May-2019
Due Date
27-Jul-2019
Completion Date
11-Jun-2019

Relations

Buy Standard

Standard
EN ISO 8130-14:2019
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 8130-14:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8130-14:2019
01-julij-2019
Nadomešča:
SIST EN ISO 8130-14:2004
Praškasti premazi - 14. del: Slovar (ISO 8130-14:2019)
Coating powders - Part 14: Vocabulary (ISO 8130-14:2019)
Pulverlacke - Teil 14: Terminologie (ISO 8130-14:2019)
Poudres pour revêtement - Partie 14: Vocabulaire (ISO 8130-14:2019)
Ta slovenski standard je istoveten z: EN ISO 8130-14:2019
ICS:
01.040.87 Industrija barv (Slovarji) Paint and colour industries
(Vocabularies)
87.040 Barve in laki Paints and varnishes
SIST EN ISO 8130-14:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8130-14:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 8130-14:2019


EUROPEAN STANDARD
EN ISO 8130-14

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2019
ICS 01.040.87; 87.040
Supersedes EN ISO 8130-14:2004
English version

Coating powders - Part 14: Vocabulary (ISO 8130-
14:2019)
Poudres pour revêtement - Partie 14: Vocabulaire (ISO Pulverlacke - Teil 14: Terminologie (ISO 8130-
8130-14:2019) 14:2019)
This European Standard was approved by CEN on 8 March 2019.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.






















CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2019 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN ISO 8130-14:2019 E
reserved worldwide for CEN national Members and for
CENELEC Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8130-14:2019
EN ISO 8130-14:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8130-14:2019
EN ISO 8130-14:2019 (E)
European foreword
This document (EN ISO 8130-14:2019) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-14:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8130-14:2019 has been approved by CEN as EN ISO 8130-14:2019 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 8130-14:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 8130-14:2019
INTERNATIONAL ISO
STANDARD 8130-14
Second edition
2019-04
Coating powders —
Part 14:
Vocabulary
Poudres pour revêtement —
Partie 14: Vocabulaire
Reference number
ISO 8130-14:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------

SIST EN ISO 8130-14:2019
ISO 8130-14:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 8130-14:2019
ISO 8130-14:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Bibliography . 5
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 8130-14:2019
ISO 8130-14:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the I
...

SLOVENSKI STANDARD
oSIST prEN ISO 8130-14:2018
01-junij-2018
Praškasti premazi - 14. del: Terminologija (ISO/DIS 8130-14:2018)
Coating powders - Part 14: Terminology (ISO/DIS 8130-14:2018)
Pulverlacke - Teil 14: Terminologie (ISO/DIS 8130-14:2018)
Poudres pour revêtement - Partie 14: Terminologie (ISO/DIS 8130-14:2018)
Ta slovenski standard je istoveten z: prEN ISO 8130-14
ICS:
01.040.87 Industrija barv (Slovarji) Paint and colour industries
(Vocabularies)
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 8130-14:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8130-14:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8130-14:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8130-14
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2018-04-03 2018-06-26
Coating powders —
Part 14:
Terminology
Poudres pour revêtement —
Partie 14: Terminologie
ICS: 87.040
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8130-14:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8130-14:2018
ISO/DIS 8130-14:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8130-14:2018
ISO/DIS 8130-14:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Terms and definitions . 1
Bibliography . 5
© ISO 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 8130-14:2018
ISO/DIS 8130-14:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 8130-14:2004) which has been technically
revised.
The main changes compared to the previous edition are as follows:
— The following terms have been added: sieve blinding, particle strength;
— the following term has been deleted: obscuration (moved to ISO 8130-13);
— the text has been editorially revised and the normative references have been updated.
A list of all parts in the ISO 8130- series can be found on the ISO website.
iv © ISO 2018 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 8130-14:2018
DRAFT INTERNATIONAL STANDARD ISO/DIS 8130-14:2018(E)
Coating powders —
Part 14:
Termin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.