Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation

This European standard describes the method of determination of the elongation under load and the residual deformation of coated fabrics.

Mit Kautschuk oder Kunststoff beschichtete Textilien - Mechanische Eigenschaften - Bestimmung der Dehnung unter Last und der verbleibenden Verformung

Diese Europäische Norm legt das Verfahren zur Bestimmung der Dehnung unter Belastung und der Restver-formung von beschichteten textilen Flächengebilden fest.

Supports textiles revêtus de caoutchouc ou de plastique - Propriétés mécaniques - Détermination de l'allongement sous charge et de la déformation résiduelle

La présente Norme européenne décrit la méthode de détermination de l’allongement sous charge et de la
déformation résiduelle des supports textiles revêtus.

Gumirane ali plastificirane tekstilije - Mehanske lastnosti - Ugotavljanje raztezka pri obremenitvi in rezidualne deformacije

Ta evropski standard opisuje metodo ugotavljanja raztezka pri obremenitvi in rezidualne deformacije plastificiranih tekstilij.

General Information

Status
Published
Publication Date
03-Oct-2011
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Sep-2011
Due Date
21-Nov-2011
Completion Date
04-Oct-2011

Buy Standard

Standard
EN 15977:2011
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gumirane ali plastificirane tekstilije - Mehanske lastnosti - Ugotavljanje raztezka pri obremenitvi in rezidualne deformacijeMit Kautschuk oder Kunststoff beschichtete Textilien - Mechanische Eigenschaften - Bestimmung der Dehnung unter Last und der verbleibenden VerformungSupports textiles revêtus de caoutchouc ou de plastique - Propriétés mécaniques - Détermination de l'allongement sous charge et de la déformation résiduelleRubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation59.080.40WHNVWLOLMHCoated fabricsICS:Ta slovenski standard je istoveten z:EN 15977:2011SIST EN 15977:2011en,fr,de01-november-2011SIST EN 15977:2011SLOVENSKI
STANDARD



SIST EN 15977:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15977
February 2011 ICS 59.080.40 English Version
Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation
Supports textiles revêtus de caoutchouc ou de plastique - Propriétés mécaniques - Détermination de l'allongement sous charge et de la déformation résiduelle
Mit Kautschuk oder Kunststoff beschichtete Textilien - Mechanische Eigenschaften - Bestimmung der Dehnung unter Last und der verbleibenden Verformung This European Standard was approved by CEN on 8 January 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15977:2011: ESIST EN 15977:2011



EN 15977:2011 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Principle .54Apparatus .55Preparation of test specimens .66Mechanical loading test .67Residual deformation after heat exposure and mechanical loading (optional) .78Calculation .89Test report .8 SIST EN 15977:2011



EN 15977:2011 (E) 3 Foreword This document (EN 15977:2011) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15977:2011



EN 15977:2011 (E) 4 Introduction This European Standard has been developed from the normative Annex C of EN 15619. SIST EN 15977:2011



EN 15977:2011 (E) 5 1 Scope This European standard describes the method of determination of the elongation under load and the residual deformation of coated fabrics. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12280-1:1997, Rub
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.