SIST EN ISO 16147:2018

SLOVENSKI STANDARD
SIST EN ISO 16147:2018
01-september-2018
1DGRPHãþD
SIST EN ISO 16147:2017
0DODSORYLOD9JUDMHQLGL]HOVNLPRWRUML1DPHãþHQHNRPSRQHQWH]DJRULYRROMHLQ
HOHNWULNR,62
Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components
(ISO 16147:2018)
Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff-,
Öl- und Elektrikbauteile (ISO 16147:2018)
Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation et des
systèmes électriques fixés sur le moteur (ISO 16147:2018)
Ta slovenski standard je istoveten z: EN ISO 16147:2018
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
SIST EN ISO 16147:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16147:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 16147:2018


EN ISO 16147
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 16147:2017
English Version

Small craft - Inboard diesel engines - Engine-mounted fuel,
oil and electrical components (ISO 16147:2018)
Petits navires - Moteurs intérieurs diesels - Éléments Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren -
des circuits d'alimentation, des systèmes de Am Motor befestigte Kraftstoff-, Öl- und
lubrification et des systèmes électriques fixés sur le Elektrikbauteile (ISO 16147:2018)
moteur (ISO 16147:2018)
This European Standard was approved by CEN on 2 April 2018.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

E U R O P Ä I SC H E S KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16147:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16147:2018
EN ISO 16147:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16147:2018
EN ISO 16147:2018 (E)
European foreword
This document (EN ISO 16147:2018) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2018, and conflicting national standards
shall be withdrawn at the latest by December 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16147:2017.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16147:2018 has been approved by CEN as EN ISO 16147:2018 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 16147:2018
EN ISO 16147:2018 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of
Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding Essential Requirements
of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2013/53/EU
Essential requirements (ERs) Clauses/subclauses of this Qualifying remarks/Notes
of European Standard
EU Directive 2013/53/EU
Annex I, Part A, 5.1.1 - 4, 5, 6 In respect of inspection of fuel, oil
Installation requirements; and electrical components fitted to
inboard engine diesel inboard-mounted engines.
Annex I, Part A, 5.2.1 - Fuel 4, 5, 7 In respect of minimising the risk of
system; general fuel leakage and risk/spread of fire
from fuel components that are
engine mounted.
Annex I, Part A, 5.3 - Electrical 4, 6 Only in respect of minimising the
system risk/spread of fire from electrical
components that are engine
mounted.
Annex I, Part A, 5.6.1 Fire 4, 5, 6, 7 In respect of the design and
protection - General installation arrangements for
engine mounted fuel, oil and
electrical components on inboard
diesel engines.

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

4

---------------------- Page: 6 ----------------------

SIST EN ISO 16147:2018
INTERNATIONAL ISO
STANDARD 16147
Second edition
2018-05
Small craft — Inboard diesel engines
— Engine-mounted fuel, oil and
electrical components
Petits navires — Moteurs intérieurs diesels — Éléments des circuits
d'alimentation, des systèmes de lubrification et des systèmes
électriques fixés sur le moteur
Reference number
ISO 16147:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 16147:2018
ISO 16147:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 16147:2018
ISO 16147:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 2
5 Engine fuel and oil system and components . 2
5.1 General . 2
5.2 High-pressure pipes . 3
5.3 Low-pressure fuel lines . 3
5.4 Fuel and lubrication oil filters . 3
6 Electrical systems and components. 3
6.1 General . 3
6.2 Cranking motors . 3
6.3 Wiring and connections . 4
6.4 Relays, fuse boxes and electronic control modules (ECMs) . 4
7 Installation manual . 4
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 16147:2018
ISO 16147:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing I
...