SIST EN 495-5:2013
(Main)Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
This European Standard specifies a method for the determination of the behaviour of plastic and rubber sheets for waterproofing to folding after exposure at a low temperature.
Abdichtungsbahnen - Bestimmung des Verhaltens beim Falzen bei tiefen Temperaturen - Teil 5: Kunststoff- und Elastomerbahnen für Dachabdichtungen
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Verhaltens beim Falzen von Kunststoff und Elastomerbahnen für Dachabdichtungen nach Lagerung bei tiefen Temperaturen fest.
Feuilles souples d'étanchéité - Détermination de la pliabilité à basse température - Partie 5 : Feuilles d'étanchéité de toiture plastiques et élastomères
La présente Norme européenne décrit une méthode pour la détermination du comportement des feuilles d’étanchéité de toiture plastiques et élastomères lors du pliage à basse température.
Hidroizolacijski trakovi - Ugotavljanje upogljivosti pri nizki temperaturi - 5. del: Polimerni in elastomerni trakovi za tesnjenje streh
Ta evropski standard določa metodo za ugotavljanje obnašanja polimernih in elastomernih trakov za tesnjenje ob upogibanju po izpostavitvi nizki temperaturi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 495-5:2013
01-september-2013
1DGRPHãþD
SIST EN 495-5:2001
Hidroizolacijski trakovi - Ugotavljanje upogljivosti pri nizki temperaturi - 5. del:
Polimerni in elastomerni trakovi za tesnjenje streh
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part
5: Plastic and rubber sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung des Verhaltens beim Falzen bei tiefen Temperaturen
- Teil 5: Kunststoff- und Elastomerbahnen für Dachabdichtungen
Feuilles souples d'étanchéité - Détermination de la pliabilité à basse température - Partie
5 : Feuilles d'étanchéité de toiture plastiques et élastomères
Ta slovenski standard je istoveten z: EN 495-5:2013
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 495-5:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 495-5:2013
---------------------- Page: 2 ----------------------
SIST EN 495-5:2013
EUROPEAN STANDARD
EN 495-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2013
ICS 91.100.50 Supersedes EN 495-5:2000
English Version
Flexible sheets for waterproofing - Determination of foldability at
low temperature - Part 5: Plastic and rubber sheets for roof
waterproofing
Feuilles souples d'étanchéité - Détermination de la pliabilité Abdichtungsbahnen - Bestimmung des Verhaltens beim
à basse température - Partie 5 : Feuilles d'étanchéité de Falzen bei tiefen Temperaturen - Teil 5: Kunststoff- und
toiture plastiques et élastomères Elastomerbahnen für Dachabdichtungen
This European Standard was approved by CEN on 28 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 495-5:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 495-5:2013
EN 495-5:2013 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle .6
5 Apparatus .6
6 Sampling .6
7 Preparation of test specimens .6
8 Procedure .6
9 Expression of results .8
10 Precision of results.8
11 Test report .9
2
---------------------- Page: 4 ----------------------
SIST EN 495-5:2013
EN 495-5:2013 (E)
Foreword
This document (EN 495-5:2013) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for
waterproofing”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn
at the latest by November 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 495-5:2000.
This document has been technically and editorially revised in order to:
add the possibility of instrumented apparatus;
add precision data of a Round Robin test.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 495-5:2013
EN 495-5:2013 (E)
Introduction
This European Standard is inten
...
SLOVENSKI STANDARD
kSIST FprEN 495-5:2012
01-december-2012
Hidroizolacijski trakovi - Ugotavljanje upogljivosti pri nizki temperaturi - 5. del:
Polimerni in elastomerni trakovi za tesnjenje streh
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part
5: Plastic and rubber sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung des Verhaltens beim Falzen bei tiefen Temperaturen
- Teil 5: Kunststoff- und Elastomerbahnen für Dachabdichtungen
Feuilles souples d'étanchéité - Détermination de la pliabilité à basse température - Partie
5 : Feuilles d'étanchéité de toiture plastiques et élastomères
Ta slovenski standard je istoveten z: FprEN 495-5
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
kSIST FprEN 495-5:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN 495-5:2012
---------------------- Page: 2 ----------------------
kSIST FprEN 495-5:2012
EUROPEAN STANDARD
FINAL DRAFT
FprEN 495-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2012
ICS 91.100.50 Will supersede EN 495-5:2000
English Version
Flexible sheets for waterproofing - Determination of foldability at
low temperature - Part 5: Plastic and rubber sheets for roof
waterproofing
Feuilles souples d'étanchéité - Détermination de la pliabilité Abdichtungsbahnen - Bestimmung des Verhaltens beim
à basse température - Partie 5 : Feuilles d'étanchéité de Falzen bei tiefen Temperaturen - Teil 5: Kunststoff- und
toiture plastiques et élastomères Elastomerbahnen für Dachabdichtungen
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 254.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 495-5:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN 495-5:2012
FprEN 495-5:2012 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .5
5 Apparatus .5
6 Sampling .5
7 Preparation of test specimens .5
8 Procedure .5
9 Expression of results .7
10 Precision of results.8
11 Test report .8
2
---------------------- Page: 4 ----------------------
kSIST FprEN 495-5:2012
FprEN 495-5:2012 (E)
Foreword
This document (FprEN 495-5:2012) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets
for waterproofing”, the secretariat of which is held by NEN.
This document is currently submitted to the Unique Acceptance Procedure.
This document will supersede EN 495-5:2000, which has been technically and editorially revised in order to:
add the possibility of instrumented apparatus;
add precision data of a Round Robin test.
3
---------------------- Page: 5 ----------------------
kSIST FprEN 495-5:2012
FprEN 495-5:2012 (E)
Introduction
This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or
supplied before use. This test method relates to products or to their components where appropriate, and not to
waterproofing membrane systems composed of such products and installed in t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.