Dentistry - External tooth bleaching products (ISO 28399:2020)

EN-ISO 28399 specifies requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and manufacturer’s instructions for use.This document is not applicable to tooth bleaching products:- specified in ISO 11609;- intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;- auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.This document does not specify biological safety aspects of tooth bleaching products.

Zahnheilkunde - Äußere Zahnbleichmittel (ISO 28399:2020)

Dieses Dokument legt Anforderungen an und Prüfverfahren für äußere Zahnbleichmittel fest. Diese Produkte sind zur Anwendung in der Mundhöhle vorgesehen, entweder durch professionelle Anwendung (Zahnbleichmittel in der Zahnarztpraxis) oder durch den Verbraucher (professionelle oder nichtprofessionelle häusliche Anwendung von Zahnbleichmitteln), oder beides. Es legt auch Anforderungen an ihre Verpackung, Kennzeichnung und Gebrauchsanweisung fest.
Dieses Dokument ist nicht anwendbar für Zahnbleichmittel:
- die in ISO 11609 beschrieben sind;
- die dazu vorgesehen sind, die Farbwahrnehmung der natürlichen Zähne durch mechanische Verfahren (z. B. Entfernung verfärbter Beläge) oder mit restaurativen Verfahren wie Verblendschalen (Veneers) und Kronen zu verändern;
- Hilfs- oder Zusatzmaterialien (z. B. Löffelmaterialien) und Instrumente oder Geräte (z. B. Leuchten), die zusammen mit den Bleichmitteln verwendet werden.
Dieses Dokument legt keine biologischen Sicherheitsaspekte von Zahnbleichmitteln fest.
ANMERKUNG   Die höchste Konzentration eines Bleichmittels zur professionellen oder nichtprofessionellen Anwendung unterliegt den Vorschriften der Aufsichtsbehörden eines Landes.

Médecine bucco-dentaire - Produits d'éclaircissement dentaire, à usage externe (ISO 28399:2020)

Le présent document spécifie les exigences et les méthodes d'essai relatives aux produits d'éclaircissement dentaire par voie externe destinés à être utilisés dans la cavité buccale, soit pour un usage professionnel (produits d'éclaircissement dentaire prévus pour une utilisation au cabinet dentaire) soit pour une application directe par le consommateur à domicile (produits d'éclaircissement dentaire spécifiés par des professionnels ou disponibles dans le commerce). Il spécifie également les exigences relatives à l'emballage, à l'étiquetage et à la notice d'utilisation du fabricant.
Le présent document ne s'applique pas aux produits d'éclaircissement dentaire suivants:
— les produits spécifiés dans l'ISO 11609;
— destinés à modifier la perception de la teinte des dents naturelles, soit par des moyens mécaniques (par exemple l'élimination des taches), soit à l'aide de techniques de restauration telles que les facettes prothétiques ou les couronnes;
— les produits auxiliaires ou complémentaires (par exemple les porte-empreintes) et les instruments ou dispositifs (par exemple les sources de lumière) qui sont utilisés conjointement avec les produits d'éclaircissement.
Le présent document ne spécifie pas les aspects relatifs à la sécurité biologique des produits d'éclaircissement dentaire.
NOTE La concentration maximale d'agent d'éclaircissement dentaire à usage professionnel ou non professionnel est fixée par l'organisme de réglementation de chaque pays.

Zobozdravstvo - Proizvodi za zunanje beljenje zob (ISO 28399:2020)

General Information

Status
Withdrawn
Public Enquiry End Date
04-Sep-2019
Publication Date
23-Apr-2020
Withdrawal Date
17-May-2021
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-May-2021
Due Date
09-Jun-2021
Completion Date
18-May-2021

Relations

Buy Standard

Standard
EN ISO 28399:2020 - BARVE
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 28399:2019 - BARVE
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28399:2020
01-maj-2020
Nadomešča:
SIST EN ISO 28399:2011
Zobozdravstvo - Proizvodi za zunanje beljenje zob (ISO 28399:2020)
Dentistry - External tooth bleaching products (ISO 28399:2020)
Zahnheilkunde - Äußere Zahnbleichmittel (ISO 28399:2020)
Médecine bucco-dentaire - Produits d'éclaircissement dentaire, à usage externe (ISO
28399:2020)
Ta slovenski standard je istoveten z: EN ISO 28399:2020
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
71.100.70 Kozmetika. Toaletni Cosmetics. Toiletries
pripomočki
SIST EN ISO 28399:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 28399:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 28399:2020


EN ISO 28399
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 71.100.70; 97.170 Supersedes EN ISO 28399:2011
English Version

Dentistry - External tooth bleaching products (ISO
28399:2020)
Médecine bucco-dentaire - Produits d'éclaircissement Zahnheilkunde - Äußere Zahnbleichmittel (ISO
dentaire, à usage externe (ISO 28399:2020) 28399:2020)
This European Standard was approved by CEN on 2 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28399:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 28399:2020
EN ISO 28399:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 28399:2020
EN ISO 28399:2020 (E)
European foreword
This document (EN ISO 28399:2020) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 28399:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 28399:2020 has been approved by CEN as EN ISO 28399:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 28399:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 28399:2020
INTERNATIONAL ISO
STANDARD 28399
Second edition
2020-03
Dentistry — External tooth bleaching
products
Reference number
ISO 28399:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification . 2
4.1 General . 2
4.2 Products for professional application . 2
4.3 Products for consumer application . 2
5 Requirements . 3
5.1 Concentration of active ingredients for bleaching . 3
5.2 Surface microhardness . 3
5.3 Surface erosion . 3
6 Measurements and test methods . 3
6.1 Preparation of tooth specimens . 3
6.2 Preparation and application of tooth bleaching product . 3
6.3 Surface microhardness . 3
7 Packaging, marking and information to be supplied by the manufacturer .3
7.1 General . 3
7.2 Packaging . 4
7.3 Marking and instructions for use . 4
Annex A (informative) Test method for the measurement of hydrogen peroxide concentration .5
Annex B (informative) Light microscopy method for measuring erosion of enamel and
dentine caused by external tooth bleaching products . 6
Annex C (informative) Test method for laboratory assessment of tooth bleaching efficacy .19
Bibliography .22
© ISO 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 7, Oral
care products, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 55, Dentistry, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 28399:2011), which has been technically
revised. The main changes compared to the previous edition are as follows:
— a light microscopy method is recommended as an example for the measurement of erosion of enamel
and dentine caused by external tooth bleaching products;
— a visual assessment with shade guide has been revised.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

Introduction
External tooth bleaching products are used in dentistry for changing the colour of natural teeth
towards a lighter or whiter shade. They are applied in the oral cavity directly on the outer surfaces
of teeth. This document includes requirements and test methods for products intended for external
bleaching of natural teeth by chemical means.
Specific qualitative and quantitative requirements for freedom from biological hazard are not included
in this document. It is recommended, that reference should be made to ISO 10993-1 and ISO 7405 when
assessing possible biological or toxicological hazards.
© ISO 2020 – All rights reserved v

---------------------- Page: 11 ----------------------
SIST EN ISO 28399:2020

---------------------- Page: 12 ----------------------
SIST EN ISO 28399:2020
INTERNATIONAL STANDARD ISO 28399:2020(E)
Dentistry — External tooth bleaching products
1 Scope
This document specifies requirements and test methods for external tooth bleaching products.
These products are intended for use in the oral cavity, either by professional application (in-office
tooth bleaching products) or consumer application (professional or non-professional home use of
tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and
manufacturer’s instructions for use.
This document is not applicable to tooth bleaching products:
— specified in ISO 11609;
— intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal)
or using restorative approaches, such as veneers or crowns;
— auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights)
that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE Maximum concentration of a bleaching agent for professional or non-professional use is subject to
each country’s regulatory body.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1042, Laboratory glassware — One-mark volumetric flasks
ISO 1942, Dentistry — Vocabulary
ISO 3696, Water for analytical laboratory use — Specification and test methods
ISO 6344-1, Coated abrasives — Grain size analysis — Part 1: Grain size distribution test
ISO 7405, Dentistry — Evaluation of biocompatibility of medical devices used in dentistry
ISO 8601-1, Date and time — Representations for information interchange — Part 1: Basic rules
ISO 8601-2, Date and time — Representations for information interchange — Part 2: Extensions
ISO 10993-1, Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk
management process
ISO 11664-1:2007, Colorimetry — Part 1: CIE standard colorimetric observers
ISO 11664-2:2007, Colorimetry — Part 2: CIE standard illuminants
ANSI/ADA Specification No. 41: Recommended Standard Practices for Biological Evaluation of Dental
Materials
© ISO 2020 – All rights reserved 1

---------------------- Page: 13 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1942 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
bleaching
removal of intrinsic or acquired discolorations of natural teeth, or changing their colour
towards a lighter or whiter shade using chemicals, sometimes in combination with the application of
auxiliary means
Note 1 to entry: Changing the colour of natural teeth towards a lighter or whiter shade is not limited to a
discoloration.
Note 2 to entry: Auxiliary means for bleaching other than the application of external energy are also conceivable.
[SOURCE: ISO 1942:2009, 2.28, modified — Note 1 and Note 2 to entry have been added.]
3.2
professional home use
use prescribed by a professional and for use at home under the repeated supervision of
the dentist
3.3
erosion
progressive loss of calcified tissue by chemical processes that do not involve
bacterial action
[SOURCE: ISO 1942:2009, 2.292, modified — terms have been modified and a domain has been added.]
4 Classification
4.1 General
External tooth bleaching products can be classified for either:
a) professional application; or
b) consumer application.
NOTE External tooth bleaching products can be used alone or in conjunction with auxiliary means of
application.
4.2 Products for professional application
These products are tooth bleaching products that are intended by the manufacturer to be applied only
by dental professionals (in office tooth bleaching products).
4.3 Products for consumer application
These products are tooth bleaching products that are intended by the manufacturer to be applied by
the consumer (for professional home use or for non-professional home use).
NOTE Such external bleaching products can be prescribed by a dental professional or directly available to
consumers.
2 © ISO 2020 – All rights reserved

---------------------- Page: 14 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

5 Requirements
5.1 Concentration of active ingredients for bleaching
The concentration of active ingredients for bleaching (equivalent to hydrogen peroxide) delivered by
the unexpired product according to manufacturer's instructions for use shall be within the range of
+10 % and −30 % of the original concentration stated by the manufacturer for the unopened product.
Annex A or other equivalent method can be used for testing.
5.2 Surface microhardness
The reduction in the Knoop hardness (KHN) or Vickers hardness (VHN) after bleaching shall not exceed
10 %, when tested in accordance with 6.3.
5.3 Surface erosion
Surface erosion of the teeth tested shall be less than the level which is caused by the standard reference
solution. The method described in Annex B or other equivalent methods can be used.
6 Measurements and test methods
6.1 Preparation of tooth specimens
Prepare enamel and dentine specimens taken from a consistent location on extracted human or bovine
teeth, that have been stored in a neutralized solution that disinfects but does not alter the physical
properties. Grind the specimen surface under a constant flow of water in accordance with ISO 3696
starting at P400 and sequentially to a minimum of P1200 silicon carbide paper in accordance with
ISO 6344-1. Then polish the surface using a slurry or paste of 0,3 µm mean particle size aluminium
oxide. Ensure a minimum of 1 mm thickness of enamel or dentine tissue for the test specimen. Prevent
dehydration of test specimens during the preparation procedure.
6.2 Preparation and application of tooth bleaching product
The dispensing, processing and application of the tooth bleaching product used in tests (see Annex C)
shall follow the manufacturer's instructions for use. The method of bleach application shall simulate the
clinical procedure in quantity, frequency and duration of the application. Between bleaching intervals,
and for 24 h after the last bleach application prior to testing, specimens shall be stored at 37 °C in an
[4]
artificial saliva solution similar to that described in the ANSI/ADA Specification No. 41 .
6.3 Surface microhardness
Evaluate enamel surface microhardness before and after bleaching treatment.
Determine KHN or VHN surface microhardness by applying a load of 0,49 N (equivalent to a 50 g load)
for 15 s. Evaluate a minimum of 10 specimens for each group, with three indentations for each specimen.
Prevent dehydration of test specimens during the specimen preparation procedure.
7 Packaging, marking and information to be supplied by the manufacturer
7.1 General
Additional information may be included at the discretion of the manufacturer or as required by
regulation in accordance with ISO 22727.
© ISO 2020 – All rights reserved 3

---------------------- Page: 15 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

7.2 Packaging
The components of the material shall be supplied in properly sealed containers which adequately
protect the contents and do not adversely affect the product quality.
7.3 Marking and instructions for use
For each package, the following applies.
a) Information shall be clearly marked on the outermost package or containers appropriate to the
product, as indicated in Table 1.
b) Instructions shall accompany each package of the product and shall include the information
appropriate to the product, as indicated in Table 1.
Table 1 — Requirements for marking and instructions for use
Manufacturer’s
Outermost
No. Information Container instructions
package
for use
1 Name of the product M M M
2 Identification or name of the manufacturer M M M
3 Address of the manufacturer or the agent responsible for sale M — M
4 Recommended conditions of storage M — M
5 Manufacturer's lot number M M —
Expiry date given in accordance with ISO 8601-1 or ISO
6 M M —
8601-2
Classification of the external tooth bleaching products
7 M — M
(Clause 4)
Clinical application of the external tooth bleaching products
8 — — M
(Clause 4)
9 Number of containers M — —
10 Net mass of product in each container M M —
11 Chemical name of active ingredient(s) M — M
12 Concentration of active ingredient(s) M M M
13 Concentration equivalent to hydrogen peroxide M M M
14 Instructions for use — — M
Recommended auxiliary device(s), exposure times and any
15 special instructions for use of the equipment (for the mate- — — M
rials requiring an auxiliary device only)
Specific contra-indication(s) and/or warning(s), such as
16 — — M
'irritation', 'avoid contact with eyes', as necessary
Statement equivalent to 'It is recommended that you consult
17 — — M
with your dental professional before using this product.'
18 Date of issue or latest revision, if applicable — — M
Key
M: mandatory information
—: non-mandatory information
For single use containers, instructions may be labelled on the secondary packaging. The minimum
information on single use containers required are: manufacturer name, trade name, lot number, and
expiry date.
4 © ISO 2020 – All rights reserved

---------------------- Page: 16 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

Annex A
(informative)

Test method for the measurement of hydrogen peroxide
concentration
A.1 Principle
The content of hydrogen peroxide (H O ) in tooth bleaching products is determined using a modified
2 2
thiosulfate titration method.
A.2 Test condition
Perform the test at (23 ± 2) °C.
[5]
A.3 Procedure (modified thiosulfate titration method, USP )
Equivalent methods can also be used.
Use analytic grade sulfuric acid, potassium iodide, ammonium molybdate, sodium thiosulfate, starch
and hydrogen peroxide. Conduct a titration calibration curve using a series of freshly prepared H O
2 2
solutions at concentrations that include the highest possible H O concentration in the test product.
2 2
Add approximately 1,0 g (weighing precision to 0,001 g) of test product or an amount appropriate
to the test, with rapid stirring, to 400 ml distilled water that contains 10 ml of sulfuric acid (25 %),
25 ml potassium iodide (10 %), and 4 drops of ammonium molybdate solution (5 %). Use starch as the
indicator, and perform the titration using 0,1 N (normality) sodium thiosulfate.
Determine the H O content using the titration calibration curve.
2 2
When using standardized titrants (e.g. USP standard grade), construction of a calibration curve is not
necessary. Calculate the mass concentration of H O using Formula (A.1):
2 2
C = (1,701 18× V/m) × Y/0,1 × 100 (A.1)
where
C is the mass concentration of H O , expressed as a percentage;
2 2
V is the titre of 0,1 N sodium thiosulfate, expressed in millilitres;
m is the mass of the test product dispensed, expressed in milligrams;
Y is the accurate concentration of sodium thiosulfate, expressed in mol/litre.
Repeat the measurement five times (n = 5) and calculate the mean H O concentration.
2 2
NOTE Formation of iodine can be indicative of the presence of sodium hypochlorite, which is relevant when
the method is used for testing an unknown active ingredient.
© ISO 2020 – All rights reserved 5

---------------------- Page: 17 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

Annex B
(informative)

Light microscopy method for measuring erosion of enamel and
dentine caused by external tooth bleaching products
B.1 Principle
The depth of erosion of enamel and dentine caused by external tooth bleaching products is determined
using a light microscope.
Test summary: sound enamel and dentine slabs of approximately 4 × 4 × 1,4 mm are cut from caries and
erosion free molars or incisors of human or bovine tooth. These slabs are mounted on a plastic rod and
the natural surface of the slab is removed by sanding to expose fresh enamel or dentine. The surface
is protected with fingernail polish leaving a 1,0 mm unprotected stripe down the centre of the fresh
enamel or dentine surfaces. The specimens are exposed to the potentially erosive solution/gel following
manufacturer’s instructions for use or for standard solutions, 1 h while stirring. The specimens are
rinsed with distilled water (D-H O), cleansed in mild detergent solution, rinsed with ethanol, and
2
rinsed again with D-H O and visually inspected to assure that all product residues have been removed.
2
The specimens are then sliced perpendicular to the exposed stripe to yield 3 or 4 cross-section slices
from each specimen slab. The cross-section slices are mounted on a glass slide, and a digital image is
obtained under microscope. A digital image of a reference scale such as a TEM grid or mm ruler is also
obtained at the same magnification. The reference scale and the cross-section can be in the same digital
image. The digital image for each cross-section is evaluated for surface loss using software capable of
1)
assessing gray scale values of pixels . The surface loss for each cross-section from a specimen slab is
averaged to give the erosion loss for each specimen.
B.2 Test Condition
Perform the test at (23 ± 2) °C, i.e. ambient temperature.
B.3 Apparatus and materials
B.3.1 Apparatus
B.3.1.1 Stereo microscope with digital camera, see Figure B.1 b).
B.3.1.2 Slow speed saw, see Figure B.1 a).
B.3.1.3 Sandpaper, 600 carbide grit (1 200 grit EU standards).
B.3.1.4 Disposable beakers, 50 ml.
B.3.1.5 Glass beakers, 100 ml.
1) ImageJ software methods are described in B.10 as an example. ImageJ software is freely available and in the
public domain and downloadable from https:// imagej .nih .gov/ ij/ . ImageJ bundled with Java 1.8.0_112 (64-bit
Java) is available for Windows system and ImageJ bundled with Java 1.8.0_172 is available for Mac OS X and follow
the installation instructions. This information is given for the convenience of users of this document and does not
constitute endorsement by ISO of this software.
6 © ISO 2020 – All rights reserved

---------------------- Page: 18 ----------------------
SIST EN ISO 28399:2020
ISO 28399:2020(E)

B.3.1.6 Volumetric flask, 100 ml, in accordance with ISO 1042, Class A.
B.3.1.7 Magnetic stir plate and magnetic stir bars.
B.3.1.8 Plastic rods (poly methyl methacrylate), 6 mm diameter × 15 cm length.
B.3.1.9 Grid, of known dimensions or mm scale to 0,5 mm.
B.3.1.10 pH/mV electrometer (pH meter), with a sensitivity of + 0,1 mV.
B.3.2 Materials
B.3.2.1 Citric acid monohydrate (C H O ·H O).
6 8 7 2
B.3.2.2 Sodium citrate dihydrate (Na C H O ·2H O).
3 6 5 7 2
B.3.2.3 Distilled water, in accordance with ISO 3696, Grade 2.
B.3.2.4 Potassium hydroxide (KOH) at 0,1 mol/l.
B.3.2.5 Hydrochloric acid (HCl) at 0,1 mol/l.
B.3.2.6 Ethanol.
B.3.2.7 Teeth (human or bovine; erupted only or unerupted only, if known) with caries free and
erosion free surfaces, sufficient amounts of teeth for collecting six (4
...

SLOVENSKI STANDARD
oSIST prEN ISO 28399:2019
01-september-2019
Zobozdravstvo - Proizvodi za zunanje beljenje zob (ISO/DIS 28399:2019)
Dentistry - Products for external tooth bleaching (ISO/DIS 28399:2019)
Zahnheilkunde - Externe Zahnbleichmittel (ISO/DIS 28399:2019)
Médecine bucco-dentaire - Produits d'éclaircissement dentaire, à usage externe
(ISO/DIS 28399:2019)
Ta slovenski standard je istoveten z: prEN ISO 28399
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
71.100.70 Kozmetika. Toaletni Cosmetics. Toiletries
pripomočki
oSIST prEN ISO 28399:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 28399:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 28399:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 28399
ISO/TC 106/SC 7 Secretariat: JISC
Voting begins on: Voting terminates on:
2019-06-14 2019-09-06
Dentistry — Products for external tooth bleaching
Médecine bucco-dentaire — Produits d'éclaircissement dentaire, à usage externe
ICS: 97.170
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 28399:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
4.1 General . 2
4.2 Products for professional application . 2
4.3 Products for consumer application . 2
5 Requirements . 2
5.1 Concentration of active ingredients for bleaching . 2
5.2 Surface microhardness . 3
5.3 Surface erosion . 3
6 Test methods . 3
6.1 Preparation of tooth specimens . 3
6.2 Preparation and application of tooth bleaching product . 3
6.3 Surface microhardness . 3
7 Packaging, marking and information to be supplied by the manufacturer .3
7.1 General . 3
7.2 Packaging . 3
7.3 Marking and instructions for use . 4
Annex A (informative) Test method for the measurement of hydrogen peroxide concentration .5
Annex B (informative) Light microscopy method for measuring erosion of enamel and
dentine caused by products for external tooth bleaching . 6
Annex C (informative) Test method for laboratory assessment of tooth bleaching efficacy .18
Bibliography .21
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 7, Oral
care products.
This second edition cancels and replaces the first edition (ISO 28399:2011), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— a light microscopy method is recommended as an example for the measurement of erosion of enamel
and dentine caused by products for external tooth bleaching.
— a visual assessment with shade guide has been revised.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

Introduction
Products for external tooth bleaching are used in dentistry for changing the colour of natural teeth
towards a lighter or whiter shade. They are applied in the oral cavity directly on the outer surfaces
of teeth. This document includes requirements and test methods for products intended for external
bleaching of natural teeth by chemical means.
© ISO 2019 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 28399:2019

---------------------- Page: 8 ----------------------
oSIST prEN ISO 28399:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 28399:2019(E)
Dentistry — Products for external tooth bleaching
1 Scope
This document specifies requirements and test methods for external tooth bleaching products.
These products are intended for use in the oral cavity, either by professional application (in-office
tooth bleaching products) or consumer application (professional or non-professional home use of
tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and
instructions for use. Maximum concentration of a bleaching agent for professional or non-professional
use is subject to each country’s regulatory body.
This document is not applicable to tooth bleaching products:
— specified in ISO 11609;
— those intended to change colour perception of natural teeth by mechanical methods (e.g. stain
removal) or using restorative approaches, such as veneers or crowns;
— auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights)
that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
[2]
NOTE A tooth bleaching product can be evaluated for its biological safety using ISO 10993-1 and
[3]
ISO 7405 .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1942:2009, Dentistry — Vocabulary
ISO 3696, Water for analytical laboratory use — Specification and test methods
ISO 6344-1, Coated abrasives — Grain size analysis — Part 1: Grain size distribution test
ISO 8601, Data elements and interchange formats — Information interchange — Representation of dates
and times
ISO 11609:2017, Dentistry — Dentifrices — Requirements, test methods and marking
ISO 11664-1:2007, Colorimetry — Part 1: CIE standard colorimetric observers
ISO 11664-2:2007, Colorimetry — Part 2: CIE standard illuminants
ISO/TR 28642:2016, Dentistry — Guidance on colour measurement
CIE s 014-6/E: 2013, Colorimetry — Part 6: CIEDE2000 Colour-Difference Formula
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1942 and the following apply.
© ISO 2019 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
3.1
bleaching
〈natural teeth〉 removal of intrinsic or acquired discolorations of natural teeth using chemicals,
sometimes in combination with the application of auxiliary means
[SOURCE: ISO 1942:2009, 2.28, modified]
3.2
professional home use
〈of a product〉 use prescribed by a professional and for use at home under the repeated supervision of
the dentist
3.3
erosion
〈of tooth surface〉 progressive loss of calcified tissue by chemical processes that do not involve
bacterial action
[SOURCE: ISO 1942:2009, 2.292, tooth erosion]
4 Classification
4.1 General
Products for external tooth bleaching can be classified for either:
a) professional application; or
b) consumer application.
NOTE Products for external tooth bleaching can be used alone or in conjunction with auxiliary means of
application.
4.2 Products for professional application
These products are tooth bleaching products that are intended by the manufacturer to be applied only
by dental professionals (in office tooth bleaching products).
4.3 Products for consumer application
These products are tooth bleaching products that are intended by the manufacturer to be applied by
the consumer (for professional home use or for non-professional home use).
NOTE Such external bleaching products can be prescribed by a dental professional or directly available to
consumers.
5 Requirements
5.1 Concentration of active ingredients for bleaching
The concentration of active ingredients for bleaching (equivalent to hydrogen peroxide) delivered by
the unexpired product according to manufacturer's instructions for use shall be within the range of
+10 % and -30 % of the original concentration stated by the manufacturer for the unopened product,
when tested in accordance with Annex A or other equivalent method.
2 © ISO 2019 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

5.2 Surface microhardness
The reduction in the Knoop hardness (KHN) or Vickers hardness (VHN) enamel surface microhardness
before and after bleaching treatment shall not exceed 10 %, when tested in accordance with 6.3.
5.3 Surface erosion
Surface erosion of the teeth tested in accordance with B.6.1 shall be equal or less than the level which
is caused by the positive control (B.4.2), when tested in accordance with Annex B or other equivalent
methods.
6 Test methods
6.1 Preparation of tooth specimens
Prepare enamel and dentine specimens taken from a consistent location on extracted human or bovine
teeth, that have been stored in a neutralized solution that disinfects but does not alter the physical
properties. Grind the specimen surface under a constant flow of water in accordance with ISO 3696
starting at P400 and sequentially to a minimum of P1200 silicon carbide paper in accordance with
ISO 6344-1. Then polish the surface using a slurry or paste of 0,3 µm mean particle size aluminium
oxide. Ensure a minimum of 1 mm thickness of enamel or dentine tissue for the test specimen. Prevent
dehydration of test specimens during the preparation procedure.
6.2 Preparation and application of tooth bleaching product
The dispensing, processing and application of the tooth bleaching product used in tests shall follow
the manufacturer's instructions for use. The method of bleach application shall simulate the clinical
procedure in quantity, frequency and duration of the application. Between bleaching intervals, and for
24 h after the last bleach application prior to testing, specimens shall be stored at 37 °C in artificial
[8]
saliva solution similar to that described in the ANSI/ADA Specification No. 41 .
6.3 Surface microhardness
Evaluate enamel surface microhardness before and after bleaching treatment.
Determine KHN or VHN surface microhardness by applying a load of 0,49 N (equivalent to a 50 g load)
for 15 s. Evaluate a minimum of 10 specimens for each group, with three indentations for each specimen.
Prevent dehydration of test specimens during the specimen preparation procedure.
7 Packaging, marking and information to be supplied by the manufacturer
7.1 General
Additional information may be included at the discretion of the manufacturer or as required by
[4]
regulation .
7.2 Packaging
The components of the material shall be supplied in properly sealed containers which adequately
protect the contents and do not adversely affect the product quality.
© ISO 2019 – All rights reserved 3

---------------------- Page: 11 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

7.3 Marking and instructions for use
For each package, the following applies.
a) Information shall be clearly marked on the outermost package or containers appropriate to the
product, as indicated in Table 1.
b) Instructions shall accompany each package of the product and shall include the information
appropriate to the product, as indicated in Table 1.
Table 1 — Requirements for marking and instructions for use
Manufactur-
Outermost
No. Information Container er’s instruc-
package
tions for use
1 Name of the product M M M
2 Identification or name of the manufacturer M M M
3 Address of the manufacturer or the agent responsible for sale M — M
4 Recommended conditions of storage M — M
5 Manufacturer's lot or batch identification M M —
Expiry date in accordance with ISO 8601 for the materials
6 under the storage conditions recommended by the manu- M M —
facturer
7 Classification of the materials (Clause 4) M — M
8 Clinical application of the material (Clause 4) — — M
9 Number of containers M — —
10 Net mass of product in each container M M M
11 Chemical name of active ingredient(s) M — M
12 Concentration of active ingredient(s) M M M
13 Concentration equivalent to hydrogen peroxide M M M
14 Instructions for use — — M
Recommended auxiliary device(s), exposure times and any
15 special instructions for use of the equipment (for the mate- — — M
rials requiring an auxiliary device only)
Specific contra-indication(s) and/or warning(s), such as
16 — — M
“irritation”, “avoid contact with eyes”, as necessary.
Statement equivalent to “It is recommended that you consult
17 — — M
with your dental professional before using this product.”
18 Passes the surface erosion test. — — M
19 Date of latest revision, if applicable — — M
Explanation of symbols:
“M” indicates mandatory information.
“—” indicates non-mandatory information.

4 © ISO 2019 – All rights reserved

---------------------- Page: 12 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

Annex A
(informative)

Test method for the measurement of hydrogen peroxide
concentration
A.1 Principle
The content of hydrogen peroxide (H O ) in tooth bleaching products is determined using a modified
2 2
thiosulfate titration method.
A.2 Test condition
Perform the test at (23 ± 2) °C.
[12]
A.3 Procedure (modified thiosulfate titration method, USP )
Equivalent methods can also be used.
Use analytic grade sulfuric acid, potassium iodide, ammonium molybdate, sodium thiosulfate, starch
and hydrogen peroxide. Conduct a titration calibration curve using a series of freshly prepared H O
2 2
solutions at concentrations that include the highest possible H O concentration in the test product.
2 2
Add approximately 1,0 g (weighing precision to 0,001 g) of test product or an amount appropriate
to the test, with rapid stirring, to 400 ml distilled water that contains 10 ml of sulfuric acid (25 %),
25 ml potassium iodide (10 %), and 4 drops of ammonium molybdate solution (5 %). Use starch as the
indicator, and perform the titration using 0,1 N (normality) sodium thiosulfate.
Determine the H O content using the titration calibration curve.
2 2
When using standardized titrants (e.g. USP standard grade), construction of a calibration curve is not
necessary. Calculate the mass concentration of H O from the following equation:
2 2
C = (1,701 18× V/m) × Y/0,1 × 100
where
C is the mass concentration of H O , expressed as a percentage;
2 2
V is the titre of 0,1 N sodium thiosulfate, in millilitres;
M is the mass of the test product dispensed, in milligrams;
Y is the accurate concentration of sodium thiosulfate, in mol/litre.
Repeat the measurement five times (n = 5) and calculate the mean H O concentration.
2 2
© ISO 2019 – All rights reserved 5

---------------------- Page: 13 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

Annex B
(informative)

Light microscopy method for measuring erosion of enamel and
dentine caused by products for external tooth bleaching
B.1 Principle
The depth of erosion of enamel and dentine caused by products for external tooth bleaching is
determined using a light microscope.
Test Summary: Sound enamel and dentin slabs of approximately 4 × 4 × 1,4 millimetre (mm) are cut
from caries and erosion free molars or incisors of human or bovine tooth. These slabs are mounted on a
plastic rod and the natural surface of the slab is removed by sanding to expose fresh enamel or dentin.
The surface is protected with fingernail polish leaving a 1,0 mm unprotected stripe down the centre
of the fresh enamel or dentin surfaces. The specimens are exposed to the potentially erosive solution/
gel following manufacturer’s instructions or for standard solutions, 1 h while stirring. The specimens
are rinsed with distilled water (D-H O), cleansed in mild detergent solution, rinsed with ethanol, and
2
rinsed again with D-H O and visually inspected to assure that all product residues have been removed.
2
The specimens are then sliced perpendicular to the exposed stripe to yield 3 or 4 cross-section slices
from each specimen slab. The cross-section slices are mounted on a glass slide, and a digital image is
obtained under microscope. A digital image of a reference scale such as a TEM grid or mm ruler is also
obtained at the same magnification. The reference scale and the cross-section can be in the same digital
image. The digital image for each cross-section is evaluated for surface loss using software capable of
1)
assessing gray scale values of pixels . The surface loss for each cross-section from a specimen slab is
averaged to give the erosion loss for each specimen.
B.2 Test Condition
Perform the test at (23 ± 2) °C, i.e., ambient temperature.
B.3 Apparatus and materials
B.3.1 Apparatus
B.3.1.1 Dissecting Microscope with digital camera, see Figure B.1B.
B.3.1.2 Slow speed saw and diamond wafering blades, course or fine, see Figure B.1A.
B.3.1.3 Sandpaper, 600 carbide grit (1 200 grit EU standards).
B.3.1.4 Disposable beakers, 50 ml.
B.3.1.5 Glass beakers, 100 ml.
1) ImageJ software methods are described in B.10 as an example. ImageJ software is freely available and in the
public domain and downloadable from National Institute of Health, 9000 Rockville Pike, Bethesda, Maryland 20892,
USA, https: //imagej .nih .gov/ij/. ImageJ bundled with Java 1.8.0_112 (64-bit Java) is available for Windows system
and ImageJ bundled with Java 1.8.0_172 is available for Mac OS X and follow the installation instructions. This
information is given for the convenience of users of this document and does not constitute endorsement by ISO of
this software.
6 © ISO 2019 – All rights reserved

---------------------- Page: 14 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

[1]
B.3.1.6 Volumetric flask, 100 ml, in accordance with ISO 1042 , Class A
B.3.1.7 Magnetic stir plate and magnetic stir bars.
B.3.1.8 Plastic rods, 6 mm diameter × 15 cm length.
B.3.1.9 TEM grid, of known dimensions or mm scale to 0.5 mm.
B.3.1.10 pH/mV electrometer (pH meter), with a sensitivity of + 0,1 mV.
B.3.2 Materials
B.3.2.1 Citric acid monohydrate (C H O ·H O).
6 8 7 2
B.3.2.2 Sodium citrate dihydrate (Na C H O ·2H O).
3 6 5 7 2
B.3.2.3 Distilled water, in accordance with ISO 3696, Grade 2.
B.3.2.4 Potassium hydroxide (KOH) at 0,1 mol/l.
B.3.2.5 Hydrochloric acid (HCl) at 0,1 mol/l.
B.3.2.6 Ethanol, denatured.
B.3.2.7 Teeth (human or bovine) with caries free and erosion free surfaces, sufficient amount of
teeth for collecting six (4 × 4 × 1,4) mm specimens for each group, disinfected in storage solution.
B.3.2.8 Fingernail polish, pigmented.
B.3.2.9 Fingernail polish, clear.
B.3.2.10 Cyanoacrylate glue.
© ISO 2019 – All rights reserved 7

---------------------- Page: 15 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

B.3.2.11 Detergent solution, e.g. 1 % sodium lauryl sulfate solution.
Figure B.1 — Apparatus for preparing and measuring specimen. (A) Slow speed wafering saw
and, (B) Dissecting microscope with digital camera
B.4 Standard reference erosion controls
B.4.1 Negative control
Grade 2 distilled water (B.3.2.3) as the negative control.
B.4.2 Positive control
B.4.2.1 Prepare buffer solutions in a clean 100 ml glass beaker (B.3.1.5) or other suitable container.
B.4.2.2 Weigh powdered citric acid monohydrate (B.3.2.1) and sodium citrate dihydrate (B.3.2.2) in
separate weighing dishes; combine crystals in a 100 ml volumetric flask (B.3.1.6) and add distilled water
(B.3.2.3) until the meniscus nears the graduation line.
B.4.2.3 Determine the pH of these solutions using a suitably calibrated pH/mV electrometer (pH
meter) (B.3.1.10) and meter while agitating using a magnetic stirrer (B.3.1.7).
B.4.2.4 If the pH is more than ±0,05 units away from the expected pH then adjust the pH accordingly
with 0,1 mol/l potassium hydroxide (B.3.2.4) or 0,1 mol/l hydrochloric acid (B.3.2.5) to the expected value.
B.4.2.5 Add distilled water (B.3.2.3) to make up to the final volume of 100 ml.
Table B.1 — Positive controls
Sodium citrate Citric acid monohy- Expected
% Citric acid
dihydrate drate
mass fraction (Na C H O ·2H O) (C H O ·H O)
3 6 5 7 2 6 8 7 2
% Mass Mass pH
1,00 0,451 0,766 3,60
0,25 0,114 0,193 3,60
8 © ISO 2019 – All rights reserved

---------------------- Page: 16 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

B.5 Specimen preparation
B.5.1 General
Samples of enamel or dentin of 4 × 4 × 1,4 mm dimension are recommended for this procedure. Sound
enamel specimen may be obtained from caries and erosion free molars or incisors of human or bovine
tooth. Dentin specimens may be obtained from incisor or premolar roots (just below the dentino-
enamel junction). Sample preparation details are presented below organized by the specimen source.
B.5.2 Cutting an enamel slab from molar teeth (see Figure B.2)
B.5.2.1 Mount tooth (B.3.2.7) in a clamp such that the tooth is horizontal in the diamond saw (see
Figure B.2A)
B.5.2.2 Using water cooled diamond wafering blade remove the cusps of the tooth.
B.5.2.3 Set the saw micrometer to zero
B.5.2.4 Advance the holder toward the dentino-enamel junction 4,1 mm and cut the top of the tooth off
of the root (see Figure B.3E).
B.5.2.5 Retrieve the 4 mm section of tooth and mount in the clamp such that a smooth surface of caries
free enamel can be sliced off the tooth (see Figure B.2B).
B.5.2.6 Align the sample such that the outer edge of the tooth just touches the wafering blade, set the
micrometer to zero.
B.5.2.7 Advance the sample 1,4 mm.
B.5.2.8 Cut the enamel away from the tooth, preserving the removed enamel slice.
B.5.2.9 Carefully mount the enamel slice in the clamp (avoiding breaking the sample).
B.5.2.10 Align the sample to remove the tapered edge of the slice and remove the taper (see Figure B.2C).
Reset the micrometer to zero.
B.5.2.11 Advance the micrometer 4 mm and cut the enamel slab off of the slice.
© ISO 2019 – All rights reserved 9

---------------------- Page: 17 ----------------------
oSIST prEN ISO 28399:2019
ISO/DIS 28399:2019(E)

B.5.2.12 Retrieve the 4 × 4 × 1,4 mm slab and with a pencil place an ‘x’ mark on the inner cut side of
the slab.
Figure B.2 — Molar enamel slab preparation
B.5.3 Cutting an enamel slab from incisor teeth (see Figure B.3)
B.5.3.1 Mount the tooth in a clamp such that the tooth is perpendicular in the diamond
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.