iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 50230:2002

(Main)

Aeronautical ground lighting electrical installation - Control and monitoring systems: General requirements

Aeronautical ground lighting electrical installation - Control and monitoring systems: General requirements

This prestandard specifies general requirements for control and monitoring system of aviation ground lighting installation.          The purpose of this prestandard is to provide a set of requirements which are applicable to the control and monitoring system of aviation ground lighting installation.

Elektrische Flugplatzbefeuerungsanlagen - Steuerungs- und Überwachungssysteme - Allgemeine Anforderungen

Aeronautical ground lighting electrical installation - Control and monitoring systems: General requirements

General Information

Status
Published
Publication Date
31-Aug-2002
Withdrawal Date
19-Mar-2018
ICS
29.140.50 - Lighting installation systems
93.120 - Construction of airports
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002
Ref Project
ENV 50230:1997 - Aeronautical ground lighting electrical installation - Control and monitoring systems: General requirements

Buy Standard

ENV 50230:2002ENV 50230:2002
PreviousNext
Standardization document
ENV 50230:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 50230:2002
01-september-2002
Aeronautical ground lighting electrical installation - Control and monitoring
systems: General requirements
Aeronautical ground lighting electrical installation - Control and monitoring systems:
General requirements
Elektrische Flugplatzbefeuerungsanlagen - Steuerungs- und Überwachungssysteme -
Allgemeine Anforderungen
Ta slovenski standard je istoveten z: ENV 50230:1997
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
93.120 *UDGQMDOHWDOLãþ Construction of airports
SIST ENV 50230:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 50230:2002

---------------------- Page: 2 ----------------------

SIST ENV 50230:2002

---------------------- Page: 3 ---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61823:2003(Main)
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
EN 61823:2003

This standard specifies the characteristics of aeronautical ground lighting series trans-formers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61820-3-4:2023(Main)
Electrical installations for lighting and beaconing of aerodromes - Part 3-4: Safety secondary circuits in series circuits - General safety requirements (IEC 61820-3-4:2023)
EN IEC 61820-3-4:2023

IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting.
The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
This document specifies the level of SELV, and alternatively PELV, under consideration of additional personnel protection during work on live secondary circuits by electrically skilled persons. This document also covers the special operational features of aeronautical ground lighting and addresses the level of training and the requirements for maintenance procedures detailed in IEC 61821 and other national or regional regulation.
The requirements and tests are intended to set a specification framework for system designers, system installers, users, and maintenance personnel to ensure a safe and economic use of electrical systems in installations for the beaconing of aerodromes.
This document complements existing IEC aeronautical ground lighting (AGL) standards and can be used as a design specification.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63067:2020(Main)
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests (IEC 63067:2020)
EN IEC 63067:2020

This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61820-1:2019(Main)
Electrical installations for aeronautical ground lighting at aerodromes - Part 1: Fundamental principles (IEC 61820-1:2019)
EN IEC 61820-1:2019

This part of IEC 61820 covers principles of design and installation requirements for AGL
systems including control, monitoring and transformation of energy, the cables and any
electrical component utilized to produce the light intended to be used as a visual aid for air
and ground navigation.
This document defines in general the fundamental principles to provide safe, reliable and
efficient operation of AGL systems independent of the particular system design. Where certain
aspects of design are specific to a particular type of system (e.g. series-circuit), these are
supplemented in the applicable part.
NOTE Local / national regulations can be different from the provisions of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62870:2016(Main)
Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
EN 62870:2015

This International Standard specifies protective provisions for the operation of lamp systems
powered by series circuits in aeronautical ground lighting.
The protective provisions described here refer only to secondary supply systems for loads
that are electrically separated from the series circuit.
This standard specifies the level of SELV, and alternatively PELV, under consideration of
additional personnel protection during work on live secondary circuits by electrically skilled
persons. This standard also covers the special operational features of aeronautical ground
lighting and addresses the level of training and the requirements for maintenance procedures
detailed in IEC 61821.
The requirements and tests are intended to set a specification framework for system
designers, users, and maintenance personnel to ensure a safe and economic use of electrical
systems in installations for the beaconing of aerodromes.
This standard complements existing IEC Airfield-Ground- Lighting (AGL) standards and can
be used as a design specification.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61821:2012(Main)
Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
EN 61821:2011

IEC 61821:2011 applies to the maintenance of AGL constant current series circuits. This International Standard:  - covers constant current series circuits for AGL installed at aerodromes and heliports;  - concentrates on providing the safety requirements for the maintenance of an AGL constant current series circuit. It is recognized that AGL constant current series circuits of different design characteristics and parameters are in existence;  - is mainly concerned with safety to persons by specifying the rules and fundamental principles for the maintenance of AGL constant current series circuits;  - is not intended to apply to AGL primary series circuits supplied directly from a mains constant voltage source;  - is not intended to be used for public street lighting, roadway lighting or any other installation requiring the use of constant current series circuits.  This second edition cancels and replaces the first edition published in 2002. It is a technical revision. This edition includes the following significant technical changes with respect to the previous edition:   a) addition of references to normative references;  b) addition of notes in Clauses 5, 6 and 7;  c) modification of pre-work procedures in item e) of 7.2.2.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61822:2009
Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
EN 61822:2009

This International Standard specifies the requirements for a Constant Current Regulator (CCR) having a nominal output of 6,6 A for use in an aeronautical ground lighting constant current series circuit. However, CCRs may be manufactured which have a different power rating (kVA) and current steps than those specified in this standard in order to be used on existing circuits. This standard should be applied where appropriate for these CCRs.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50512:2009
Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
EN 50512:2009

This European Standard specifies requirements of electrical and mechanical design, installation, maintenance and testing procedures for advanced visual docking guidance systems.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61823:2003(Main)
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
EN 61823:2003

This standard specifies the characteristics of aeronautical ground lighting series trans-formers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ENV 50234:1999(Main)
Aeronautical ground lighting electrical installation - Flashing lights: Equipment specifications and tests
ENV 50234:1997

This prestandard specifies general requirements for classification of flashing light systems used on airports or for ground based aviation lighting systems, for the luminaries, for the control cabinets and for their mechanical and electrical construction erection, together with the related tests. This prestandard is applicable to flashing light systems used for: - Sequential flashing approach lighting systems; - Runway threshold identification lights; - Runway lead-in lighting systems; - Medium and high intensity obstruction lighting systems. Alternately flashing lights used as runway guard lights are excluded from this prestandard. Attention is drawn to the fact that this prestandard covers all aspects of safety (electrical, thermal and mechanical). The purpose of this prestandard is to provide a set of requirements and tests which are applicable to the luminaries and their control equipment. In general, this prestandard covers safety requirements for all components of the system.

  • Standardization document
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day