iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1834-3:2000

(Main)

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres

This European standard specifies the safety requirements and/or measures to remove the hazards and limit the risks on reciprocating internal combustion compression ignition engines of group II categories 2 and 3 for use in flammable dust atmospheres. The standard does not define requirements relating to the driven machinery. These requirements can be found in the appropriate application standards.

Hubkolben-Verbrennungsmotoren - Sicherheitsanforderungen für die Konstruktion und den Bau von Motoren zur Verwendung in explosionsgefährdeten Bereichen - Teil 3: Motoren der Gruppe II für Bereiche mit explosionsfähigen Stäuben

Diese Europäische Norm spezifiziert die Sicherheitsanforderungen und Maßnahmen um Gefahren abzuwenden und Risiken zu begrenzen, die selbstzündende Hubkolben-Verbrennungsmotoren -im nachfolgenden Motoren genannt- der Gruppe II Kategorien 2 und 3, die in Bereichen mit explosionsfähigen Stäuben eingesetzt werden, darstellen. Die Norm definiert nicht die Anforderungen für die angetriebenen Maschinen. Diese Anforderungen können den entsprechenden Anwendungsnormen entnommen werden.

Moteurs alternatifs a combustion interne - Prescriptions de sécurité pour la conception et la construction des moteurs fonctionnant en atmosphere explosible - Partie 3: Moteurs du groupe II utilisés dans des atmospheres de poussieres inflammables

La présente norme européenne spécifie les prescriptions et/ou mesures de sécurité applicables aux moteurs alternatifs a allumage par compression du groupe II et des catégories 2 et 3 désignés ci-apres par le terme moteur fonctionnant dans des atmospheres de poussieres inflammables. La présente norme européenne ne précise pas les prescriptions concernant les machines entraînées. Ces prescriptions peuvent etre trouvées dans les normes d'application correspondantes.

Batni motorji z notranjim zgorevanjem - Varnostne zahteve za načrtovanje in konstruiranje motorjev za uporabo v potencialno eksplozivnih atmosferah - 3. del: Motorji skupine II za uporabo v atmosferah z vnetljivim prahom

General Information

Status
Published
Publication Date
31-Mar-2000
ICS
13.230 - Explosion protection
27.020 - Internal combustion engines
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2000
Due Date
01-Apr-2000
Completion Date
01-Apr-2000
Directive
2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
Ref Project
EN 1834-3:2000 - Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres

Buy Standard

EN 1834-3:2000EN 1834-3:2000
PreviousNext
Standard
EN 1834-3:2000
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1834-3:2000
01-april-2000
%DWQLPRWRUML]QRWUDQMLP]JRUHYDQMHP9DUQRVWQH]DKWHYH]DQDþUWRYDQMHLQ
NRQVWUXLUDQMHPRWRUMHY]DXSRUDERYSRWHQFLDOQRHNVSOR]LYQLKDWPRVIHUDKGHO
0RWRUMLVNXSLQH,,]DXSRUDERYDWPRVIHUDK]YQHWOMLYLPSUDKRP
Reciprocating internal combustion engines - Safety requirements for design and
construction of engines for use in potentially explosive atmospheres - Part 3: Group II
engines for use in flammable dust atmospheres
Hubkolben-Verbrennungsmotoren - Sicherheitsanforderungen für die Konstruktion und
den Bau von Motoren zur Verwendung in explosionsgefährdeten Bereichen - Teil 3:
Motoren der Gruppe II für Bereiche mit explosionsfähigen Stäuben
Moteurs alternatifs a combustion interne - Prescriptions de sécurité pour la conception et
la construction des moteurs fonctionnant en atmosphere explosible - Partie 3: Moteurs
du groupe II utilisés dans des atmospheres de poussieres inflammables
Ta slovenski standard je istoveten z: EN 1834-3:2000
ICS:
13.230 Varstvo pred eksplozijo Explosion protection
27.020 Motorji z notranjim Internal combustion engines
zgorevanjem
SIST EN 1834-3:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1834-3:2000

---------------------- Page: 2 ----------------------

SIST EN 1834-3:2000

---------------------- Page: 3 ----------------------

SIST EN 1834-3:2000

---------------------- Page: 4 ----------------------

SIST EN 1834-3:2000

---------------------- Page: 5 -----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1834-2:2000(Main)
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 1834-2:2000

This European standard specifies the safety requirements and/or measures to remove the hazards and limit the risks on reciprocating internal combustion compression ignition engines of group I category M2 for use in underground workings susceptible to firedamp and/or combustible dust hereinafter referred to as engines. The standard does not define requirements relating to the driven machinery.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1834-1:2000(Main)
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN 1834-1:2000

This European standard specifies the safety requirements and/or measures to remove the hazards and limit the risks on reciprocating internal combustion compression ignition engines hereinafter referred to as "engines" of group II categories 2 and 3 for use in potentially explosive atmospheres of flammable gas and vapour. This European standard does not apply to flammable gas and vapour atmospheres containing carbon disulphide (CS2).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1834-2:2000(Main)
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 1834-2:2000

This European standard specifies the safety requirements and/or measures to remove the hazards and limit the risks on reciprocating internal combustion compression ignition engines of group I category M2 for use in underground workings susceptible to firedamp and/or combustible dust hereinafter referred to as engines. The standard does not define requirements relating to the driven machinery.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1834-1:2000(Main)
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN 1834-1:2000

This European standard specifies the safety requirements and/or measures to remove the hazards and limit the risks on reciprocating internal combustion compression ignition engines hereinafter referred to as "engines" of group II categories 2 and 3 for use in potentially explosive atmospheres of flammable gas and vapour. This European standard does not apply to flammable gas and vapour atmospheres containing carbon disulphide (CS2).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO/IEC 80079-41:2023(Main)
Explosive atmospheres - Part 41: Reciprocating internal combustion engines (ISO/IEC DIS 80079-41:2023)
prEN ISO/IEC 80079-41

This part of ISO/IEC 80079 covers the technical requirements necessary to avoid or minimize the significant hazards listed in Clause 4, which could occur during normal operation, maintenance or foreseeable malfunction of reciprocating internal combustion engines intended for use in explosive atmospheres including
- Group I EPL Mb for use in underground workings susceptible to firedamp and/or combustible dust,
- Group II EPL Gb and Gc for use in potentially explosive atmospheres of flammable gas and vapour and
- Group III EPL Db and Dc for use in potentially explosive atmospheres of combustible dust.
This part of ISO/IEC 80079 includes those tests of the engine and its ancillary devices that are required to verify compliance.
This part of ISO/IEC 80079 applies to reciprocating internal combustion engines with compression ignition and spark ignition.
This part of ISO/IEC 80079 does not define requirements relating to the driven machinery and equipment.
This part of ISO/IEC 80079 does not apply
- to flammable gas and vapour atmospheres containing carbon disulphide (CS2) and/or ethylene oxide (C2H4O) due to special properties of these gases;
- to explosive mixtures of vapours and gases, which tend to self-decompose (e.g. acetylene) or which are chemically unstable.This International standard does not apply to engines used in areas for the processing manufacture or storage of explosives;
- to gasoline engines and all other liquid injection spark ignited engines.
This part of ISO/IEC 80079 solely deals with explosion protection requirements. Requirements on emissions are not covered by this standard.
General safety requirements are not included in this International Standard.
NOTE 1   General safety requirements i.e. those common to internal combustion engines, are covered for the EU in EN 1679-1:1998+A1:2011.
This part of ISO/IEC 80079 does not specify requirements for safety, other than those directly related to the risk of ignition which may then lead to an explosion.The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that engine can be operated are:
- temperature -20 °C to +40 °C;
- pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and
- air with normal oxygen content, typically 21 % v/v.
Such atmospheres can also exist inside the engine. In addition, the external atmosphere can be drawn inside the engine by natural breathing produced as a result of fluctuations in the engine's internal operating pressure, and/or temperature.
NOTE 2   It is considered that −20 °C to +40 °C is appropriate for most engines. However for equipment designed for outside this range IEC/TS 60079-43 should be considered.
NOTE 3   The requirements of this standard can also be helpful for the design, construction, testing and marking of engine intended for use in atmospheres outside the validity range stated above. In this case however, the ignition hazard assessment, ignition protection provided, additional testing (if necessary), manufacturer’s technical documentation and instructions to the user, should clearly demonstrate and indicate the engine's suitability for the conditions it may encounter. It should also be recognized that changes in temperature and pressure can have a significant influence on characteristics of the explosive atmosphere, such as ignitability (see Annex I).
NOTE 4   Reciprocating internal combustion engines are not considered as pressure vessels.

  • Draft
    132 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-3:2023(Main)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
EN ISO 3262-3:2023

This document specifies requirements and corresponding methods of test for blanc fixe.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day