SIST EN 2852:2010
(Main)Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1100 MPa/650 °C
Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1100 MPa/650 °C
This standard specifies the characteristics of plain hexagonal nuts in passivated heat resisting steel, with or without locking holes, the dimensions of which are in conformity with ISO 8279. These nuts are intended for use in aircraft assemblies, subjected principally to tension loading. They are intended to be used with bolts of 1 100 MPa 1) tensile strength classification, at temperatures up to 650 °C.
Luft- und Raumfahrt - Sechskantmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, passiviert - Klasse: 1100 MPa/650 °C
Diese Norm legt die Eigenschaften für Sechskantmuttern aus hochwarmfestem Stahl, passiviert, mit oder
ohne Sicherungslöcher, deren Maße mit ISO 8279 übereinstimmen, fest.
Diese Muttern sind, vorwiegend unter Zugbeanspruchung, für die Anwendung in Baugruppen für Luftfahrzeuge
vorgesehen.
Sie sind für die Anwendung mit Schrauben der Zugfestigkeitsklasse 1 100 MPa1) bei Temperaturen bis zu
650 °C vorgesehen.
Série aérospatiale - Écrous hexagonaux, simples hauteur normale, surplats normaux en acier résistant à chaud passivé - Classification: 1100 MPa/650 °C
Aeronavtika - Matice, šestrobe, drsne, z normalnim zevom ključa, iz toplotnoodpornega jekla, pasivirane - Klasifikacija: 1100 MPa/650 °C
This standard specifies the characteristics of plain hexagonal nuts in passivated heat resisting steel, with or without locking holes, the dimensions of which are in conformity with ISO 8279. These nuts are intended for use in aircraft assemblies, subjected principally to tension loading. They are intended to be used with bolts of 1 100 MPa 1) tensile strength classification, at temperatures up to 650 °C.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.L]Luft- und Raumfahrt - Sechskantmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, passiviert - Klasse: 1100 MPa/650 °CSérie aérospatiale - Écrous hexagonaux, simples hauteur normale, surplats normaux en acier résistant à chaud passivé - Classification: 1100 MPa/650 °CAerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1100 MPa/650 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2852:2010SIST EN 2852:2010en01-maj-2010SIST EN 2852:2010SLOVENSKI
STANDARD
SIST EN 2852:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2852
March 2010 ICS 49.030.30 English Version
Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1 100 MPa/650 °C
Série aérospatiale - Écrous hexagonaux, simples hauteur normale, surplats normaux en acier résistant à chaud passivé - Classification : 1 100 MPa/650 °C
Luft- und Raumfahrt - Sechskantmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, passiviert - Klasse: 1 100 MPa/650 °C This European Standard was approved by CEN on 25 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2852:2010: ESIST EN 2852:2010
EN 2852:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Required characteristics .54Designation .75Marking .86Technical specification .8 SIST EN 2852:2010
EN 2852:2010 (E) 3 Foreword This document (EN 2852:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 2852:2010
EN 2852:2010 (E) 4 1 Scope
This standard specifies the characteristics of plain hexagonal nuts in passivated heat resisting steel, with or without locking holes, the dimensions of which are in conformity with ISO 8279. These nuts are intended for use in aircraft
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.