Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds

This European Standard specifies requirements and test methods for non-hardening sealing materials (hereafter referred to as jointing compounds) suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems (Class A), in gas appliances and their auxiliary equipment (Class B) as well as in LPG storage (Class C) according to table 1.  Anaerobic jointing compounds are covered by EN 751-1, non-hardening sealing materials in the form of PTFE-tapes are covered by EN 751-3.

Dichtmittel für Gewindeverbindungen in Kontakt mit Gasen der 1., 2. und 3. Familie und Heißwasser - Teil 2: Nichtaushärtende Dichtmittel

Diese Norm legt Anforderungen und Prüfmethoden für nichtaushärtende Dichtmittel (im weiteren als Dichtmittel bezeichnet) fest, die geeignet sind, metallene Gewindeverbindungen, wie sie z.B. in ISO 7-1 genormt sind, abzudichten. Diese Dichtmittel sind für den Einsatz in Kontakt mit Gasen der 1., 2. und 3. Gasfamilie und Heißwasser von Heizungsanlagen (Klasse A), für den Einsatz in Gasgeräten und deren Zusatzeinrichtungen (Klasse B), sowie in Gastransport und Flüssiggaslagerung (Klasse C) nach Tabelle 1 geeignet.

Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ere, 2eme et 3eme famille et de l'eau chaude - Partie 2: Composition d'étanchéité non durcissante

Ces normes contiennent les exigences et les méthodes d'essais auxquelles doiventsatisfaire les matériaux d'étanchéité (appelés ci-dessous compositions d'étanchéité) convenant a étancher les raccords filetés métalliques décrits dansla Norme ISO 7-1. Ces compositions d'étanchéité sont utilisables pour les circuits des gaz du 1er, 2eme et 3eme groupe, et l'eau de chauffage (Classe A), pour les appareils a gaz et leur équipement auxiliaire (Classe B) de meme que pour les circuits et le stockage du GPL (Classe C) en accord avec le Tableau 1.

Tesnilni materiali za kovinske navojne zveze v stiku s plini 1., 2. in 3. družine ter vročo vodo - 2. del: Nestrdljivi tesnilni materiali

General Information

Status
Published
Publication Date
31-Jul-1997
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Aug-1997
Due Date
01-Aug-1997
Completion Date
01-Aug-1997

Buy Standard

Standard
EN 751-2:1997
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 751-2:1997
01-avgust-1997
7HVQLOQLPDWHULDOL]DNRYLQVNHQDYRMQH]YH]HYVWLNXVSOLQLLQGUXåLQHWHU
YURþRYRGRGHO1HVWUGOMLYLWHVQLOQLPDWHULDOL
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family
gases and hot water - Part 2: Non-hardening jointing compounds
Dichtmittel für Gewindeverbindungen in Kontakt mit Gasen der 1., 2. und 3. Familie und
Heißwasser - Teil 2: Nichtaushärtende Dichtmittel
Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ere, 2eme et
3eme famille et de l'eau chaude - Partie 2: Composition d'étanchéité non durcissante
Ta slovenski standard je istoveten z: EN 751-2:1996
ICS:
83.140.50 Tesnila Seals
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN 751-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 751-2:1997

---------------------- Page: 2 ----------------------

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.