SIST EN IEC 61968-5:2020

Oznaka standarda: SIST EN IEC 61968-5:2020
Koda projekta: 67138
Organizacija: SIST
Naslov (angleški): Application integration at electric utilities - System interfaces for distribution management – Part 5: Distributed energy optimization
Naslov (slovenski): Združevanje aplikacij pri oskrbi z električno enegijo - Sistemski vmesniki za upravljanje distribucije - 5. del: Optimizacija porazdeljenih energijskhi virov
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN IEC 61968-5:2020 angleški jezik Active SIST-J: 96.80 EUR
PDF
Papir
Tehnični odbor: PSE - Procesni sistemi v energetiki
ICS: 29.240.30 35.200
Status: Objavljen
Objavljen: 01-Nov-2020
Refer. št. objave: Sporocila 2020-11
Referenčna oznaka: EN IEC 61968-5:2020
Področje projekta (angleško): The scope of this part of IEC 61968 is the description of a set of functions that are needed for enterprise integration of DERMS functions. These exchanges are most likely between a DERMS and a DMS. However, since this is an enterprise integration standard which may leverage IEC 61968-100:2013 for application integration (using web services or JMS) or other looselycoupled implementations, there are no technical limitations for systems with which a DERMS might exchange information. Also, it should be noted that a DERMS might communicate with individual DER using a variety of standards and protocols such as IEC 61850, IEEE 2030.5, Distribution Network Protocol (DNP), Sunspec Modbus, or perhaps Open Field Message Bus (OpenFMB). One role of the DERMS is to manage this disparity and complexity of communications on the behalf of the system operator. However, the communication to individual DER is out of scope of this standard. Readers are invited to look to those standards to understand communication to individual DERs' smart inverter. The scope will be limited to the following use case categories: • DER group creation – a mechanism to manage DER in aggregate • DER group maintenance – a mechanism to add, remove, or modify the members and/or aggregated capabilities of a given group of DER • DER group deletion – removing an entire group • DER group status monitoring – a mechanism for quantifying or ascertaining the current capabilities and/or status of a group of DER • DER group forecast – a mechanism for predicting the capabilities and/or status of a group of DER for a given time period in the future • DER group dispatch – a mechanism for requesting that specified capabilities of a group of DER be dispatched to the grid • DER group voltage ramp rate control – a mechanism for requesting that a DER group following a ramp rate curve • DER group connect/disconnect – a mechanism to request that DER either isolate themselves, or reconnect to the grid as needed

Najbolje prodajani standardi